그림 1. HPGP 홈 응용과 프로토콜 스택 Fig. 1 HPGP home application and protocol stack
그림 2. Use-case 분류 Fig. 2 Classification of use-case
그림 3. EVCC의 V2G 통신 절차 Fig. 3 Procedure of V2G communication for EVCC
그림 4. SECC의 V2G 통신 절차 Fig. 4 Procedure of V2G communication for SECC
그림 5. PLC 모듈 Fig. 5 PLC module
그림 6. 제어기 Fig. 6 Controller
그림 7. PLC 통신 시험 구성도 Fig. 7 Configuration diagram for PLC communication test
그림 8. 환경시험 Fig. 8 Environmental test
그림 9. 성능시험 구성도 Fig. 9 Configuration diagram for performance test
그림 10. 성능 시험 모니터링 Fig. 10 Monitoring for performance test
표 1. ISO/IEC 15118의 구분 Table 1. Classification of ISO/IEC 15118
표 2. PLC 모듈 사양 Table 2. Specification of PLC module
표 3. 제어기 사양 Table 3. Specification of controller
표 4. 성능시험 결과 Table 4. Results of performance test
References
- M. Yilmaz and P. T. Krein, "Review of charging power levels and infrastructure for plug-in electric and hybrid vehicles," 2012 IEEE Int. Electric Vehicle Conf., Greenville, USA, Apr. 2012, pp. 1-8.
- O. Veneri, L. Ferraro, C. Capasso, and D. Iannuzzi, "Charging infrastructures for EV: Overview of technologies and issues," 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion, Bologna, Italy, Oct. 2012, pp. 1-6.
- S. Baek, "A study on educational contents of hybrid electric vehicle using real time monitoring system," J. of the Korea Institute of Electronic Communication Sciences, vol. 13. no. 2, 2018, pp. 443-448. https://doi.org/10.13067/JKIECS.2018.13.2.443
- S. Baek, "A Study on Contents for Education Using Actual Vehicle-based Electric Vehicle Diagnostic System," J. of the Korea Institute of Electronic Communication Sciences, vol. 13. no. 3, 2018, pp. 555-560. https://doi.org/10.13067/JKIECS.2018.13.3.555
- J. Kim, "A study on the optimum selection of the power factor compensation condenser according to the improved efficiency of induction motor," Trans. of the Korean Institute of Electrical Engineers, vol. 65, no. 7, July 2016, pp. 1311-1315. https://doi.org/10.5370/KIEE.2016.65.7.1311
- S. Kwak, H. Kim, and J. Yang, "Design and implementation of oil pump control system driven by a brushless dc electric motor," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 1, Jan. 2014, pp. 83-90. https://doi.org/10.13067/JKIECS.2014.9.1.83
- U. Chukwu and S. Mahajan, "Real-Time Management of Power Systems With V2G Facility for Smart-Grid Applications," IEEE Trans. Sustainable Energy, vol. 5, no. 2, Apr. 2014, pp. 558-566. https://doi.org/10.1109/TSTE.2013.2273314
- A. Kavousi-Fard, T. Niknam, and M. Fotuhi-Firuzabad, "Stochastic Reconfiguration and Optimal Coordination of V2G Plug-in Electric Vehicles Considering Correlated Wind Power Generation," IEEE Trans. Sustainable Energy, vol. 6, no. 3, July 2015, pp. 822-830. https://doi.org/10.1109/TSTE.2015.2409814
- O. Veneri, L. Ferraro, C. Capasso, and D. Iannuzzi, "Charging infrastructures for EV: Overview of technologies and issues," 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion, Bologna, Italy, Oct. 2012, pp. 1-6.
- T. Anegawa, "Characteristics of CHAdeMO Quick Charging System," EVS 25 World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Shenzhen, China, Nov. 2015, pp. 818-822.
- ISO Std. 15118-1, Road Vehicles - Vehicle-to-Grid Communication Interface - Part 1: General Information and Use-case Definition. ISO, Geneva, Switzerland, 2013.
- ISO Std. 15118-2, Road Vehicles - Vehicle-to-Grid Communication Interface - Part 2: Network and Application Protocol Requirements. ISO, Geneva, Switzerland, 2014.
- ISO Std. 15118-3, Road Vehicles - Vehicle-to-Grid Communication Interface - Part 3: Physical and Data Link Layer Requirements. ISO, Geneva, Switzerland, 2015.
- DIN SPEC 70121, Digital Communication between a d.c. EV Charging Station and an Electric Vehicle for Control of d.c. Charging in the Combined Charging System. DIN, Berlin, Germany, 2014.
- SAE Std. J1772_201710, SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler. SAE International, Warrendale, PA, 2017.