Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Global Sliding Mode Control based on a Hyperbolic Tangent Function for Matrix Rectifier

  • Hu, Zhanhu (School of Automation, Guangdong University of Technology) ;
  • Hu, Wang (School of Automation, Guangdong University of Technology) ;
  • Wang, Zhiping (Guangdong Institute of Intelligent Manufacturing) ;
  • Mao, Yunshou (School of Automation, Guangdong University of Technology) ;
  • Hei, Chenyang (School of Electric Power, South China University of Technology)
  • Received : 2016.10.22
  • Accepted : 2017.04.03
  • Published : 2017.07.20
Download PDF
⟨ Previous Next ⟩

Abstract

The conventional sliding mode control (CSMC) has a number of problems. It may cause dc output voltage ripple and it cannot guarantee the robustness of the whole system for a matrix rectifier (MR). Furthermore, the existence of a filter can decrease the input power factor (IPF). Therefore, a novel global sliding mode control (GSMC) based on a hyperbolic tangent function with IPF compensation for MRs is proposed in this paper. Firstly, due to the reachability and existence of the sliding mode, the condition of the matrix rectifier's robustness and chattering elimination is derived. Secondly, a global switching function is designed and the determination of the transient operation status is given. Then a SMC compensation strategy based on a DQ transformation model is applied to compensate the decreasing IPF. Finally, simulations and experiments are carried out to verify the correctness and effectiveness of the control algorithm. The obtained results show that compared with CSMC, applying the proposed GSMC based on a hyperbolic tangent function for matrix rectifiers can achieve a ripple-free output voltage with a unity IPF. In addition, the rectifier has an excellent robust performance at all times.

Keywords

Acknowledgement

Supported by : Frontier and Key Technological Innovation Special Foundation of Guangdong Province

References

  1. D. G. Holmes, and T. A. Lipo, "Implementation of a controlled rectifier using AC-AC matrix converter theory," IEEE Trans. Power Electron., Vol.7, No. 1, pp. 240-250, Jan. 1992. https://doi.org/10.1109/63.124596
  2. P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham, and A.Weinstein, "Matrix converter: A technology review," IEEE Trans. Ind. Electron., Vol. 49, No. 2, pp.276-288, Apr. 2002. https://doi.org/10.1109/41.993260
  3. R. Metidji, B. Metidji, and B. Mendil, "Design and implementation of a unity power factor fuzzy battery charger using an ultrasparse matrix rectifier," IEEE Trans. Power Electron., Vol. 28, No. 5, pp.2269-2276, May 2013. https://doi.org/10.1109/TPEL.2012.2211107
  4. M. Su, H. Wang, Y. Sun, J. Yang, W.J. Xiong, and Y. L. Liu, "AC/DC matrix converter with an optimized modulation strategy for V2G applications," IEEE Trans. Power Electron., Vol. 28, No. 12, pp.5736-5745, Feb. 2013. https://doi.org/10.1109/TPEL.2013.2250309
  5. X. Liu, Q. F. Zhang, D. L. Hou, and S. Y. Sun, "Improved space vector modulation strategy for AC-DC matrix converters," Journal of Power Electronics, Vol. 13, No. 4, pp.647-655, Apr. 2013. https://doi.org/10.6113/JPE.2013.13.4.647
  6. F. Blaabjerg, D. Casadei, C. Klumpner, M. Matteini, and C. Klumpner, "Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions," IEEE Trans. Ind. Electron., Vol. 49, No. 2, pp.289-296, Apr. 2002. https://doi.org/10.1109/41.993261
  7. H. M. Nguyen, H. H. Lee, and T. W. Chun, "Input Power Factor Compensation Algorithms Using a New Direct-SVM Method for Matrix Converter," IEEE Trans. Ind. Electron., Vol. 58, No. 1, pp.232-243, Jan. 2011. https://doi.org/10.1109/TIE.2010.2044736
  8. J. D. Zhu, Z. Xu, B. H. Jiang, and C. H. Zhang, "Close-loop control of an AC-DC matrix converter for automotives," IEEE Electrical Power and Energy Conference (EPEC), Vol. 59 , No. 4 , pp. 1939-1949, Oct. 2011.
  9. J. Rodriguez, M. Rivera, J. Kolar, and P. Wheeler, "Areview of control and modulation methods for matrix converters," IEEE Trans. Ind. Electron., Vol. 59, No. 1, pp.58-70, Jan. 2012. https://doi.org/10.1109/TIE.2011.2165310
  10. K. You, D. Xiao, M. F. Rahman, and M. N. Uddin, "Applying reduced general direct space vector modulation approach of AC/AC matrix converter theory to achieve direct power factor controlled three-phase AC-DC matrix rectifier," IEEE Trans. Ind. Appl., Vol. 50 , No. 3 , pp. 2243-2257, May 2014. https://doi.org/10.1109/TIA.2013.2285956
  11. B. Feng, and H. Lin, "Finite control set model predictive control of AC/DC matrix converter for grid-connected battery energy storage application," Journal of Power Electronics, Vol. 15, No. 4, pp.1006-1017, Mar. 2015. https://doi.org/10.6113/JPE.2015.15.4.1006
  12. X. Liu, Q. F. Zhang and D. L. Hou, "Sliding mode variable structure control of matrix rectifiers," Trans. of China Electro technical Society, Vol.28 No.4, pp.149-164, Apr. 2013.
  13. S. Pinto, and J. Silva, "Input filter design for sliding mode controlled matrix converter," IEEE Power Electronics Specialists Conference,Vol.2, pp. 648-653, Jun. 2001.
  14. S. Pinto, and J. Silva, "Sliding mode direct control of matrix converters," IET Electr. Power Appl., Vol. 1, No. 2, pp.439-448, Jul. 2007. https://doi.org/10.1049/iet-epa:20060257
  15. Z. P. Wang, Y. S. Mao, Z. H. Hu, and Y. X. Xie, "A sliding mode control design based on the reaching law for matrix rectifiers," Journal of Power Electronics, Vol. 16, No. 2, pp. 1122-1130, May 2016. https://doi.org/10.6113/JPE.2016.16.3.1122
  16. Z. P. Wang, Y. S. Mao, and Z. H. Hu, "Sliding mode control of uncertain parameter for a matrix rectifier," IEICE Electronics Express, Vol. 13, No. 12, pp.20160462, Jun. 2016. https://doi.org/10.1587/elex.13.20160462
  17. W. B. Gao, Y. F. Wang, and H. Abdollah, "Discrete-time variable structure control systems," IEEE Trans. Ind. Electron., Vol. 42, No. 2, pp.117-122, Apl. 1995. https://doi.org/10.1109/41.370376
  18. J. J. Kim, J. J. Lee, and K. B. Park, "Design of new time-varying sliding surface for robot manipulator using variable structure controller," IET Electronics Letters (EL), Vol. 29, No. 2, pp.195-196, Jan. 1993. https://doi.org/10.1049/el:19930131
  19. Y. S. Lu, and J. S. Chen, "Design of a global sliding-mode controller for a motor drive with bounded control," International Journal of Control, Vol. 62, No. 5, pp.1001-1019, Nov. 1995. https://doi.org/10.1080/00207179508921579
  20. Y. Ni, J. P. Xu, J. P. Wang, and H. K. Yu, "Design of global sliding mode control buck converter with hysteresis modulation," China Society for electrical engineering, Vol. 30, No. 21, pp. 1-6, Jul. 2010.
  21. B. Liu, M. Su, X. F. Lin, Y. Sun, and H. Wang, "Reactive power compensation modulation and waveform-improving control strategy for non-isolated H6-type single-phase photovoltaic grid-connected inverter," China Society for Electrical Engineering, Vol. 36, No. 4, pp. 1050-1060, Feb. 2016.
  22. IEC 60038:2009, Standard voltages - Part 4: Standard voltages-Highest and lowest voltage values at supply and utilization terminals for a.c. systems having a nominal voltage between 100V and 1000V.
  23. M. M. Polycarpou, and P. A. Ioannou, "A robust adaptive nonlinear control design," Automatica, Vol. 32, No. 3, pp. 423-427, Mar. 1996. https://doi.org/10.1016/0005-1098(95)00147-6
  24. H. S. Choi, Y. H. Park, Y. S. Cho, M. H Lee, "Global sliding-mode control. Improved design for a brushless DC motor," IEEE Contr. Syst. Mag., Vol.21, No.3, pp.27-35, Jun. 2001.