DOI QR코드

DOI QR Code

Simulation and Design of a Multilayer Piezoelectric Actuator

  • Lee, Kabsoo (YEMI) ;
  • Yoo, Juhyun (Department of Electrical Engineering, Semyung University) ;
  • Lee, Sangho (Department of Electrical Information Control, Dongseoul University) ;
  • Hong, Jaeil (Department of Electrical Information Control, Dongseoul University)
  • Received : 2016.09.05
  • Accepted : 2017.01.12
  • Published : 2017.06.25

Abstract

In this study, two- and three-layer ceramic piezoelectric actuators were designed and simulated according to SUS316 thickness, actuator width, and mass using ATILA software in order to develop a piezoelectric actuator for haptic application. Numerical modelling based on the finite element method was performed to find the resonance frequencies and modal shapes of the actuator. The resonance frequency was affected by the thickness of the SUS316 plate and mass. On the other hand, the width of the actuator did not have a significant impact. Maximum displacements were generated at the center of a haptic three-layer ceramic piezoelectric actuator. The two-layer ceramic piezoelectric actuator with a mass of 2.6 g was suitable as $16.28{\mu}m$ at 265 Hz for haptic sensation application.

Keywords

References

  1. I. Poupyrev, S. Maruyama, and J. Rekimoto, Proc. UIST 2002 (Paris, France, 2002) P. 51. [DOI: https://doi.org/10.1145/571985.571993]
  2. Y. K. Oh and J. H. Yoo, Mater. Lett., 79, 180 (2012). [DOI: https://doi.org/10.1016/j.matlet.2012.04.010]
  3. J. R. Noh and J. H. Yoo, J. Electroceram, 30, 139 (2012). [DOI: https://doi.org/10.1007/s10832-012-9775-7]
  4. M. H. Park and J. H. Yoo, J. Elec. Mater., 30, 3095 (2012). [DOI: https://doi.org/10.1007/s11664-012-2206-3]
  5. I. T. Seo, T. G. Lee, D. H. Kim, J. Hur, J. H. Kim, S. Nahm, J. Ryu, and B. Y. Choi, Sensor. Actuat. A, 71, 238 (2016).
  6. J. H. Kim, J. H. Kwon, J. S. Park, and K. J. Lim, J. Korean Inst. Electr. Electron. Mater. Eng., 28, 565 (2015). [DOI: https://doi.org/10.4313/JKEM.2015.28.9.565]