DOI QR코드

DOI QR Code

Steam generator performance improvements for integral small modular reactors

  • Ilyas, Muhammad (Pakistan Institute of Engineering and Applied Sciences (PIEAS)) ;
  • Aydogan, Fatih (Center for Advanced Energy Studies (CAES), University of Idaho)
  • 투고 : 2017.01.13
  • 심사 : 2017.08.20
  • 발행 : 2017.12.25

초록

Background: Steam generator (SG) is one of the significant components in the nuclear steam supply system. A variety of SGs have been designed and used in nuclear reactor systems. Every SG has advantages and disadvantages. A brief account of some of the existing SG designs is presented in this study. A high surface to volume ratio of a SG is required in small modular reactors to occupy the least space. In this paper, performance improvement for SGs of integral small modular reactor is proposed. Aims/Methods: For this purpose, cross-grooved microfins have been incorporated on the inner surface of the helical tube to enhance heat transfer. The primary objective of this work is to investigate thermal-hydraulic behavior of the proposed improvements through modeling in RELAP5-3D. Results and Conclusions: The results are compared with helical-coiled SGs being used in IRIS (International Reactor Innovative and Secure). The results show that the tube length reduces up to 11.56% keeping thermal and hydraulic conditions fixed. In the case of fixed size, the steam outlet temperature increases from 590.1 K to 597.0 K and the capability of power transfer from primary to secondary also increases. However, these advantages are associated with some extra pressure drop, which has to be compensated.

키워드

참고문헌

  1. M.M. Abu-Khader, Recent advances in nuclear power: a review, Prog. Nucl. Energy 51 (2009) 225-235. https://doi.org/10.1016/j.pnucene.2008.05.001
  2. H. Hidayatullah, S. Susyadi, M.H. Subki, Design and technology development for small modular reactors d safety expectations, prospects and impediments of their deployment, Prog. Nucl. Energy 79 (2015) 127-135. https://doi.org/10.1016/j.pnucene.2014.11.010
  3. IAEA-TECDOC-1451, Small and Medium Sized Reactors: Design Features, Safety Approaches and R&D Trends, International Atomic Energy Agency, Vienna, 2005.
  4. IAEA-TECDOC-1474, Natural Circulation in Water Cooled Nuclear Power Plants Phenomena, Models, and Methodology for System Reliability Assessments, International Atomic Energy Agency, Vienna, 2005.
  5. IAEA-TECDOC-1536, Status of Small Reactor Designs without On-site Refueling, International Atomic Energy Agency, Vienna, 2007.
  6. M.K. Rowinski, T.J. White, J. Zhao, Small and medium sized reactors (SMR): a review of technology, Renew. Sust. Energy Rev. 44 (2015) 643-656. https://doi.org/10.1016/j.rser.2015.01.006
  7. Pressurized water reactor (PWR) systems, in Reactor Concepts Manual, USNRC Technical Training Center.
  8. R.J. Fetterman, A. Harkness, M. Smith, C. Taylor, An overview of the Westinghouse small modular reactor, in: Proceedings of the ASME 2011 Small Modular Reactors Symposium SMR 2011, American Society of Mechanical Engineers, Washington, DC, USA, 2011.
  9. L. Damiani, M. Montecucco, A. Pini Prato, Conceptual design of a bayonet-tube steam generator for the ALFRED lead-cooled reactor, Nucl. Eng. Des. 265 (2013) 154-163. https://doi.org/10.1016/j.nucengdes.2013.06.021
  10. TOSHIBA [Internet], Super-safe, Small and Simple Reactor (4S, Toshiba Design), 2013 [cited 2013 Jun 3]. Available from: https://aris.iaea.org/sites/..%5CPDF%5C4S.pdf.
  11. TOSHIBA [Internet], 4S Design Description, 2008 [cited 2008 May]. Available from: http://pbadupws.nrc.gov/docs/ML0814/ML081440765.pdf.
  12. TOSHIBA [Internet], 4S Reactor e Super-Safe, Small and Simple, 2009 [cited 2009 Jun]. Available from: http://www.uxc.com/smr/Library%5CDesign%20Specific/4S/Presentations/2009%20-%204S%20Reactor.pdf.
  13. V.H. Nathan, S. Piyush, A.A. Nolan, Modeling a Helical-coil Steam Generator in RELAP5-3D for the Next Generation Nuclear Plant, United States, Office of the Assistant Secretary for Nuclear Energy, Washington, D.C., 2011.
  14. J.N. Reyes, NuScale plant safety in response to extreme events, Nucl. Technol. 178 (2012) 153-163. https://doi.org/10.13182/NT12-A13556
  15. J.R. Thome, Enhanced Boiling Heat Transfer, Hemisphere, New York, 1990.
  16. G.A. Longo, A. Gasparella, R. Sartori, Experimental heat transfer coefficients during refrigerant vaporisation and condensation inside herringbone-type plate heat exchangers with enhanced surfaces, Int. J. Heat Mass Transfer 47 (2004) 4125-4136. https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.001
  17. S.-P. Guo, Z. Wu, W. Li, D. Kukulka, B. Sunden, X.-P. Zhou, J.-J. Wei, T. Simon, Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes, Int. J. Heat Mass Transfer 85 (2015) 281-291. https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.115
  18. T.L. Bergman, D.P. DeWitt, F.P. Incropera, A.S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Hoboken, NJ, 2011.
  19. L. Chamra, R.L. Webb, Condensation and evaporation in micro-fin tubes at equal saturation temperatures, J. Enhanced Heat Transfer 2 (1995) 219-229. https://doi.org/10.1615/JEnhHeatTransf.v2.i3.50
  20. S. Choi, R.F. Barron, R. Warrington, Fluid flow and heat transfer in microtubes, in: Proceedings of Winter Annual Meeting of ASME, DSC, New York, 1991.
  21. S. Eckels, M. Pate, An experimental comparison of evaporation and condensation heat transfer coefficients for HFC-134a and CFC-12, Int. J. Refrigeration 14 (1991) 70-77. https://doi.org/10.1016/0140-7007(91)90078-U
  22. O.B. Ergu, O.N. Sara, S. Yapici, M.E. Arzutug, Pressure drop and point mass transfer in a rectangular microchannel, Int. Commun. Heat Mass Transfer 36 (2009) 618-623. https://doi.org/10.1016/j.icheatmasstransfer.2009.03.015
  23. A. Kawahara, P.M.Y. Chung, M. Kawaji, Investigation of two-phase flow pattern, void fraction and pressure drop in a microchannel, Int. J. Multiphase Flow 28 (2002) 1411-1435. https://doi.org/10.1016/S0301-9322(02)00037-X
  24. P. Thors, J. Bogart, In-tube evaporation of HCFC-22 with enhanced tubes, J. Enhanced Heat Transfer 1 (1994) 365-377. https://doi.org/10.1615/JEnhHeatTransf.v1.i4.70
  25. P. Gao, S. Le Person, M. Favre-Marinet, Scale effects on hydrodynamics and heat transfer in two-dimensional mini and microchannels, Int. J. Thermal Sci. 41 (2002) 1017-1027. https://doi.org/10.1016/S1290-0729(02)01389-3
  26. E. Hahne, U. Grigull, Heat Transfer in Boiling, Hemisphere, Washington, DC, 1977.
  27. P.S. Lee, J.C. Ho, H. Xue, Experimental study on laminar heat transfer in microchannel heat sink, in: Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM 2002, IEEE, 2002.
  28. K. Nilpueng, S. Wongwises, Flow pattern and pressure drop of vertical upward gaseliquid flow in sinusoidal wavy channels, Exp. Thermal Fluid Sci. 30 (2006) 523-534. https://doi.org/10.1016/j.expthermflusci.2005.10.004
  29. D.B. Tuckerman, R. Pease, High-performance heat sinking for VLSI, IEEE Electron, Device Lett. 2 (1981) 126-129. https://doi.org/10.1109/EDL.1981.25367
  30. S. Eckels, M. Pate, Evaporation and condensation of HFC-134 a and CFC-12 in a smooth tube and a micro-fin tube, ASHRAE Trans. 97 (1991).
  31. L. Cinotti, M. Bruzzone, N. Meda, G. Corsini, C.V. Lombardi, M. Ricotti, L.E. Conway, Steam generator of the international reactor innovative and secure, in: International Conference on Nuclear Engineering, Arlington, Virginia, USA, 2002.
  32. M.D. Carelli, L.E. Conway, L. Oriani, The design and safety features of the IRIS reactor, Nucl. Eng. Des 230 (2004) 151-167. https://doi.org/10.1016/j.nucengdes.2003.11.022
  33. G.A. Roth, F. Aydogan, Development of governing equations based on six fields for the RELAP code, Nucl. Sci. Eng. 182 (2016) 71-82. https://doi.org/10.13182/NSE14-149

피인용 문헌

  1. Analytic springback prediction in cylindrical tube bending for helical tube steam generator vol.52, pp.9, 2017, https://doi.org/10.1016/j.net.2020.02.004
  2. Comparative Analysis of Hybrid Desalination Technologies Powered by SMR vol.13, pp.19, 2017, https://doi.org/10.3390/en13195006
  3. Exergetic design and analysis of a nuclear SMR reactor tetrageneration (combined water, heat, power, and chemicals) with designed PCM energy storage and a CO2 gas turbine inner cycle vol.53, pp.2, 2021, https://doi.org/10.1016/j.net.2020.07.007