1 |
P.S. Lee, J.C. Ho, H. Xue, Experimental study on laminar heat transfer in microchannel heat sink, in: Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM 2002, IEEE, 2002.
|
2 |
K. Nilpueng, S. Wongwises, Flow pattern and pressure drop of vertical upward gaseliquid flow in sinusoidal wavy channels, Exp. Thermal Fluid Sci. 30 (2006) 523-534.
DOI
|
3 |
D.B. Tuckerman, R. Pease, High-performance heat sinking for VLSI, IEEE Electron, Device Lett. 2 (1981) 126-129.
DOI
|
4 |
S. Eckels, M. Pate, Evaporation and condensation of HFC-134 a and CFC-12 in a smooth tube and a micro-fin tube, ASHRAE Trans. 97 (1991).
|
5 |
L. Cinotti, M. Bruzzone, N. Meda, G. Corsini, C.V. Lombardi, M. Ricotti, L.E. Conway, Steam generator of the international reactor innovative and secure, in: International Conference on Nuclear Engineering, Arlington, Virginia, USA, 2002.
|
6 |
M.D. Carelli, L.E. Conway, L. Oriani, The design and safety features of the IRIS reactor, Nucl. Eng. Des 230 (2004) 151-167.
DOI
|
7 |
G.A. Roth, F. Aydogan, Development of governing equations based on six fields for the RELAP code, Nucl. Sci. Eng. 182 (2016) 71-82.
DOI
|
8 |
E. Hahne, U. Grigull, Heat Transfer in Boiling, Hemisphere, Washington, DC, 1977.
|
9 |
H. Hidayatullah, S. Susyadi, M.H. Subki, Design and technology development for small modular reactors d safety expectations, prospects and impediments of their deployment, Prog. Nucl. Energy 79 (2015) 127-135.
DOI
|
10 |
M.M. Abu-Khader, Recent advances in nuclear power: a review, Prog. Nucl. Energy 51 (2009) 225-235.
DOI
|
11 |
IAEA-TECDOC-1451, Small and Medium Sized Reactors: Design Features, Safety Approaches and R&D Trends, International Atomic Energy Agency, Vienna, 2005.
|
12 |
IAEA-TECDOC-1474, Natural Circulation in Water Cooled Nuclear Power Plants Phenomena, Models, and Methodology for System Reliability Assessments, International Atomic Energy Agency, Vienna, 2005.
|
13 |
IAEA-TECDOC-1536, Status of Small Reactor Designs without On-site Refueling, International Atomic Energy Agency, Vienna, 2007.
|
14 |
L. Damiani, M. Montecucco, A. Pini Prato, Conceptual design of a bayonet-tube steam generator for the ALFRED lead-cooled reactor, Nucl. Eng. Des. 265 (2013) 154-163.
DOI
|
15 |
M.K. Rowinski, T.J. White, J. Zhao, Small and medium sized reactors (SMR): a review of technology, Renew. Sust. Energy Rev. 44 (2015) 643-656.
DOI
|
16 |
Pressurized water reactor (PWR) systems, in Reactor Concepts Manual, USNRC Technical Training Center.
|
17 |
R.J. Fetterman, A. Harkness, M. Smith, C. Taylor, An overview of the Westinghouse small modular reactor, in: Proceedings of the ASME 2011 Small Modular Reactors Symposium SMR 2011, American Society of Mechanical Engineers, Washington, DC, USA, 2011.
|
18 |
TOSHIBA [Internet], Super-safe, Small and Simple Reactor (4S, Toshiba Design), 2013 [cited 2013 Jun 3]. Available from: https://aris.iaea.org/sites/..%5CPDF%5C4S.pdf.
|
19 |
TOSHIBA [Internet], 4S Design Description, 2008 [cited 2008 May]. Available from: http://pbadupws.nrc.gov/docs/ML0814/ML081440765.pdf.
|
20 |
TOSHIBA [Internet], 4S Reactor e Super-Safe, Small and Simple, 2009 [cited 2009 Jun]. Available from: http://www.uxc.com/smr/Library%5CDesign%20Specific/4S/Presentations/2009%20-%204S%20Reactor.pdf.
|
21 |
V.H. Nathan, S. Piyush, A.A. Nolan, Modeling a Helical-coil Steam Generator in RELAP5-3D for the Next Generation Nuclear Plant, United States, Office of the Assistant Secretary for Nuclear Energy, Washington, D.C., 2011.
|
22 |
J.N. Reyes, NuScale plant safety in response to extreme events, Nucl. Technol. 178 (2012) 153-163.
DOI
|
23 |
J.R. Thome, Enhanced Boiling Heat Transfer, Hemisphere, New York, 1990.
|
24 |
L. Chamra, R.L. Webb, Condensation and evaporation in micro-fin tubes at equal saturation temperatures, J. Enhanced Heat Transfer 2 (1995) 219-229.
DOI
|
25 |
G.A. Longo, A. Gasparella, R. Sartori, Experimental heat transfer coefficients during refrigerant vaporisation and condensation inside herringbone-type plate heat exchangers with enhanced surfaces, Int. J. Heat Mass Transfer 47 (2004) 4125-4136.
DOI
|
26 |
S.-P. Guo, Z. Wu, W. Li, D. Kukulka, B. Sunden, X.-P. Zhou, J.-J. Wei, T. Simon, Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes, Int. J. Heat Mass Transfer 85 (2015) 281-291.
DOI
|
27 |
T.L. Bergman, D.P. DeWitt, F.P. Incropera, A.S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Hoboken, NJ, 2011.
|
28 |
S. Choi, R.F. Barron, R. Warrington, Fluid flow and heat transfer in microtubes, in: Proceedings of Winter Annual Meeting of ASME, DSC, New York, 1991.
|
29 |
O.B. Ergu, O.N. Sara, S. Yapici, M.E. Arzutug, Pressure drop and point mass transfer in a rectangular microchannel, Int. Commun. Heat Mass Transfer 36 (2009) 618-623.
DOI
|
30 |
S. Eckels, M. Pate, An experimental comparison of evaporation and condensation heat transfer coefficients for HFC-134a and CFC-12, Int. J. Refrigeration 14 (1991) 70-77.
DOI
|
31 |
A. Kawahara, P.M.Y. Chung, M. Kawaji, Investigation of two-phase flow pattern, void fraction and pressure drop in a microchannel, Int. J. Multiphase Flow 28 (2002) 1411-1435.
DOI
|
32 |
P. Thors, J. Bogart, In-tube evaporation of HCFC-22 with enhanced tubes, J. Enhanced Heat Transfer 1 (1994) 365-377.
DOI
|
33 |
P. Gao, S. Le Person, M. Favre-Marinet, Scale effects on hydrodynamics and heat transfer in two-dimensional mini and microchannels, Int. J. Thermal Sci. 41 (2002) 1017-1027.
DOI
|