• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.186-192
• /
• 1996

가압기의 유체 조건이 증기에서 이상유체로 변화하는 완전급수상실사고 경우에 대한 안전감압계통의 가압기 노즐 및 밸브 전단에서의 유량, 밸브 후단에서의 압력 변화 등 RELAP5/MOD1과 RELAP5/MOD3로 계산된 열수력 조건이 유사한 추세를 나타내었다. 또한 RELAP5/MOD1-CALPLOTFIII와 RELAP5/MOD3-CALPLOTFIII 전산체제로 계산된 안전감압계통의 각 배관부위에서의 동하중도 유사한 추세를 나타내었다. 즉, RELAP5/MOD1-CALPLOTFIII와 RELAP5/MOD3-CALPLOTFIII 전산체제를 이용한 안전감압계통의 열수력 과도현상 해석 결과가 유사하여 RELAP5/MOD1 대신에 RELAP5/MOD3가 안전감압계통의 열수력 과도현상 분석에 대체사용될 수 있을 것으로 판단된다. 그러나 본 연구는 안전감압계통에 국한하여 수행되었으며, RELAP5/MOD1과 RELAP5/MOD3를 이용한 가압기안전밸브 방출배관에 대한 기존의 연구 결과에 의하면 RELAP5/MOD3가 만족스러운 곁과를 제공하지 못하는 바, 다른 계통에 RELAP5/MOD1 대신 RELAP5/MOD3를 대체적용하기 위해서는 개별적으로 각 계통에 대한 비교 평가가 선행되어야 할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• v.35 no.5
• /
• pp.426-441
• /
• 2003

A reactor inlet header break experiment, B9401, performed in the RD-14M multi channel test facility was analyzed using RELAP5/MOD3.2 and RELAP5/CANDU[1]. The RELAP5 has been developed for the use in the analysis of the transient behavior of the pressurized water reactor. A recent study showed that the RELAP5 could be feasible even for the simulation of the thermal hydraulic behavior of CANDU reactors. However, some deficiencies in the prediction of fuel sheath temperature and transient behavior in athe headers were identified in the RELAP5 assessments. The RELAP5/CANDU has been developing to resolve the deficiencies in the RELAP5 and to improve the predictability of the thermal-hydraulic behaviors of the CANDU reactors. In the RELAP5/CANDU, critical heat flux model, horizontal flow regime map, heat transfer model in horizontal channel, etc. were modified or added to the RELAP5/MOD3.2. This study aims to identify the applicability of both codes, in particular, in the multi-channel simulation of the CANDU reactors. The RELAP5/MOD3.2 and the RELAP5/CANDU analyses demonstrate the code's capability to predict reasonably the major phenomena occurred during the transient. The thermal-hydraulic behaviors of both codes are almost identical, however, the RELAP5/CANDU predicts better the heater sheath temperature than the RELAP5/MOD3.2. Pressure differences between headers govern the flow characteristics through the heated sections, particularly after the ECI. In determining header pressure, there are many uncertainties arisen from the complicated effects including steady state pressure distribution. Therefore, it would be concluded that further works are required to reduce these uncertainties, and consequently predict appropriately thermal-hydraulic behaviors in the reactor coolant system during LOCA analyses.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.455-467
• /
• 2002

RELAP5/MOD3.2 was modified to perform the thermal-hydraulic safety analysis for HANARO transients. Several aspects of RELAP5/MOD3.2 were modified or replaced by new features to properly simulate the unique HANARO characteristics such as the finned fuel element, the cooling mechanisms by both plate type heat exchanger and the natural circulation. Especially, the heat transfer packages were modified to be more appropriate for the safety analysis and the heat transfer models were developed for the plate type heat exchanger as well as natural circulation through the pool water. This modified version of RELAP5/MOD3.2 is renamed as RELAP5/HANARO. The thermal-hydraulic simulations of the single fuel pin test and plate type heat exchanger were peformed to assess the realistic predicting capabilities of RELAP5/HANARO and compared with experimental results and manufacturer＇s data in this paper. In addition, the natural circulation experiment using the scaled bundle was simulated to validate the capability of RELAP5/HANARO. The simulation results show almost similar trend with experimental data. Therefore, it is proved that RELAP5/HANARO has a confidence to use for the safety analyses of HANARO.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.645-660
• /
• 1995

The loss of Residual Heat Removal System (RHRS) event during reduced inventory operation for the Korean Standard Nuclear Power Plants (KSNPPS) is simulated by RELAP5/MOD3 and RELAP5/MOD3.1 Tn cases are considered : Base case for an intact Reactor Coolant System (RCS) with no tent and a vent case for an open system. Comparative simulations of base case are peformed by RELAP5/MOD3 and RELAP5/MOD3. 1 computer codes. The results of too simulations are generally in good qualitative and quantitative agreement. However, since the results of RELAP5/MOD3 simulation reveals the deficiency of RELAP5/MOD3 wall heat model, the RELAP5/AOD3.1 computer code is used for the simulation of the vent case. The analysis result of base case show that two steam generators are insufficient to remove decay heat at one day after shutdown, where the RCS is closed. The RCS pressure increased continuously and reached the RCS temporary boundaries design pressure of 0.24 MPa around 4,000 seconds. In the vent case with a flow capacity equivalent to three times the capacity of Pressurizer Safety Valve (PSV), it is shown that the RCS Pressure does not reach 0.24 MPa and core uncovery does not occur until 10,000 seconds. The detailed discussions on the results of this study suggest the feasibility of RELAP5/AOD3.1 as an analysis tool for the simulation of the loss of RHRS event at reduced inventory operation. The results of this study also provide insight for the determination of proper vent capacity.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.243-251
• /
• 1992

Behavior of loop seal formation and clearing during small break loss of coolant accident is investigated using the RELAP5/MOD 2 and /MOD3 codes with the test of SB-CL-18 of the LSIF (Large Scale Test Facility）. The present study examines the thermal-hydraulic mechanisms responsible for early core uncovery including the manometric effect due to an asymmetric coolant holdup in the steam generator upflow and downflow side. The analysis with the RELAP5/MOD2 demonstrates the main phenomena occuring in the depressurization transient including the loop seal formation and clearing with sufficient accuracy. Nevertheless, several differences regarding the evolution of phenomena and their timing have been pointed out in かe base calculations. The RELAP5/MOD3 predicts overall phenomena, particularly the steam generator liquid holdup better than the RELAP5/MOD2. The nodalization study in the components of the steam generator U-tubes and the cross-over legs wiか the RELAP5/MOD3 results in good prediction of the loop seal clearing phenomena and their timing.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.479-483
• /
• 1997

CANDU형 발전소의 사고해석 검증을 위한 계통분석 코드는 별도로 개발되어 있지 않으며, PWR 사고해석 검증용으로 널리 사용되고 있는 RELAP5 코드를 CANDU형 발전소의 사고해석 검증용으로 개발하려는 연구가 현재 진행되고 있다. CANDU형 발전소를 묘사한 RD-14 실험장치에서의 실험결과를 RELAP5 코드로 평가한 연구는 있으나, 실제 CANDU형 발전소의 사고해석에 적용한 예는 없다. 본 연구에서는 RELAP5 코드를 이용하여 CANDU형 발전소의 주증기관 파단사고를 분석하고, 그 결과를 월성 2,3,4 FSAR의 분석결과와 비교하여, CANDU형 발전소에 대한 RELAP5 코드의 적용 타당성을 평가하는데 그 목적이 있다. 연구결과, RELAP5 코드는 CANDU형 발전소의 주증기관 파단사고를 잘 모사하고 있으며, CANDU형 발전소의 사고해석 검증용 코드로서 적절함을 보여주고 있다.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.297-310
• /
• 1992

FLECHT SEASET unblocked forced reflood tests are assessed using Apollo version of RELAP5/MOD3 5M5. The main purpose of the study is to examine the code predictability under forced reflood conditions having different initial power levels and flooding rates. Among various test matrices, the assessment calculations are performed for the test numbers 31701 31302, 31203, 31805, 34524, 31021, 34006 and 35807 These have been selected because they have similar initial conditions but different initial peak rod powers or flooding rates. In addition, various sensitivity calculations are performed for test number 31203 on the improved models of RELAP5/MOD3. Those are for the effect of Counter Current Flow Limit (CCFL) option at the outlet junction of the test section, for the effect of grid modelling on the interfacial drag calculations as well as on the heat structure calculations, and for the effect of nodalization and the time step size. The results of sensitivity studies show that the improved models of RELAP5/MOD3 enhance the code predictability. The assessment results show that the RELAP5/MOD3 has a tendency to underpredict the turn around temperature and the turn around time. But RELAP5/MOD3 silghtly overpredicts the turn around temperature for high flooding rate. The results also show that the calculated quenching by RELAP5/MOD3 is delayed with the increase of the rod power or the decrease of the flooding rate.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.115-115
• /
• 1999

To demonstrate the applicability of RELAP5 to the prediction of the onset offlooding in the hot leg at the reflux condensation phase during mid-loop operation, numerical analysis is performed for the counter-current flow in a horizontal pipe with the inclined riser using the RELAP5/MOD3.2.2b code. It is found that the RELAP5, simulating the CCFL phenomena using interfacial friction along with the flow regime map in the horizontal pipe, produces unsatisfactory results. Under the CCFL condition, it is observed that large oscillation exists in the flow rate, void fraction, and etc. and the liquid flow rate is much lower than that predicted by the CCFL model measured in the experiment. The CCFL model of RELAP5 for the vertical volume is extended to the model for the horizontal and inclined volumes. The horizontal volume flow regime map and interfacial friction model coupled to the CCFL model are modified. And a new correlation developed from Kang's experiment is implemented to the CCFL model of RELAP5. With this modified RELAP5, the analysis of CCFL phenomena in the horizontal pipe and hot leg geometry is performed, and produces reasonable results in comparison with experimental data.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.585-590
• /
• 1997

The condonation models in the standard RELAP5/MOD3.2 code are assessed and improved based on the database, which is constructed from the previous experimental data on various condonation phenomena The default model the laminar film condonation in RELAP5/MOD3.2 does not give any reliable predictions, and its alternative model always predicts higher values than the experimental data Therefore, it is needed to develop a new correlation based on the experimental data of various operating ranges in the constructed database. The Shah correlation, which is used to calculate the turbulent film condensation heat transfer coefficients in the standard RELAP5/MOD3.2, well predicts the experimental data in the database. The horizontally stratified condonation model of RELAP5/MOD3.2 overpredicts both cocurrent and countercurrent experimental data The correlation proposed by H.J.Kim predicts the database relatively well compared with that of RELAP5/MOD3.2 The RELAP5/MOD3.2 model should use the liquid velocity for the calculation of the liquid Reynolds number and be modified to conifer the effects of the gas velocity and the film thickness.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1926-1938
• /
• 2020

We validated the performance of RELAP MOD3.3 code regarding the hybrid SIT with available experimental data. The concept of the hybrid SIT is to connect the pressurizer to SIT to utilize the water inside SIT in the case of SBO or SB-LOCA combined with TLOFW. We investigated how well RELAP5 code predicts the physical phenomena in terms of the equilibrium time, stratification, condensation against Separate Effect Test (SET) data. We also conducted the validation of RELAP5 code against Integrated Effect Test (IET) experimental data produced by the ATLAS facility. We followed conventional approach for code validation of IET data, which are pre-test and post-test calculation. RELAP5 code shows substantial difference with changing number of nodes. The increase of the number of nodes tends to reduce the condensation rate at the interface between liquid and vapor inside the hybrid SIT. The environmental heat loss also contributes to the large discrepancy between the simulation results of RELAP5 and the experimental data.