참고문헌
- C. Kim, T.-I. Lee, M. S. Kim and T.-S. Kim, "Warpage analysis of electroplated Cu films on fiber-reinforced polymer packaging substrates", Polymers, 7, 985 (2015). https://doi.org/10.3390/polym7060985
- M.-K. Lee, I.-W. Suh, H.-S. Jung, J.-H. Lee and S.-H. Choa, "Warpage of Flexible OLED under High Temperature Reliability Test", J. Microelectron. Packag. Soc., 23, 17 (2016). https://doi.org/10.6117/kmeps.2016.23.1.017
- C. Kim, H. Choi, M. S. Kim and T.-S. Kim, "Packaging Substrate Bending Prediction due to Residual Stress", J. Microelectron. Packag. Soc., 20, 21 (2013). https://doi.org/10.6117/kmeps.2013.20.1.021
- H.-S. Jung, K. Eun, E.-K. Lee, K.-Y. Jung, S.-H. Choi and S.-H. Choa, "Flexible Durability of Ultra-Thin FPCB", J. Microelectron. Packag. Soc., 21, 69 (2014). https://doi.org/10.6117/kmeps.2014.21.4.069
- J. Jin, J. H. Ko, S. Yang and B. S. Bae, "Rollable Transparent Glass-Fabric Reinforced Composite Substrate for Flexible Devices", Adv. Mater., 22, 4510 (2010). https://doi.org/10.1002/adma.201002198
- H. Y. Kim, J. Jin, S.-H. Ko Park, I.-Y. Eom and B.-S. Bae, "350 C processable low-CTE transparent glass-fabric-reinforced hybrimer film for flexible substrates", J. Inf. Disp., 16, 57 (2015). https://doi.org/10.1080/15980316.2014.1003984
- W.-Y. Chang, T.-H. Fang, H.-J. Lin, Y.-T. Shen and Y.-C. Lin, "A large area flexible array sensors using screen printing technology", J. Disp. Technol., 5, 178 (2009). https://doi.org/10.1109/JDT.2008.2004862
- N. T. Tien, S. Jeon, D. I. Kim, T. Q. Trung, M. Jang, B. U. Hwang, et al., "A flexible bimodal sensor array for simultaneous sensing of pressure and temperature", Adv. Mater., 26, 796 (2014). https://doi.org/10.1002/adma.201302869
- M. Abdelfatah, J. Ledig, A. El-Shaer, A. Wagner, A. Sharafeev, P. Lemmens, et al., "Fabrication and characterization of flexible solar cell from electrodeposited Cu 2 O thin film on plastic substrate", Sol. Energy, 122, 1193 (2015). https://doi.org/10.1016/j.solener.2015.11.002
- A. S. M. Ang and C. C. Berndt, "A review of testing methods for thermal spray coatings", Int. Mater. Rev., 59, 179 (2014). https://doi.org/10.1179/1743280414Y.0000000029
- P. Hollman, M. Larsson, P. Hedenqvist and S. Hogmark, "Tensile testing as a method for determining the Young's modulus of thin hard coatings", Surf. Coat. Technol., 90, 234 (1997). https://doi.org/10.1016/S0257-8972(96)03140-4
- F. Aviles, L. Llanes and A. Oliva, "Elasto-plastic properties of gold thin films deposited onto polymeric substrates", J. Mater. Sci., 44, 2590 (2009). https://doi.org/10.1007/s10853-009-3339-5
- F. Macionczyk and W. Bruckner, "Tensile testing of AlCu thin films on polyimide foils", J. Appl. Phys., 86, 4922 (1999). https://doi.org/10.1063/1.371461
- G. Tolf and P. Clarin, "Comparison between flexural and tensile modulus of fibre composites", Fibre Sci. Technol. 21, 319 (1984). https://doi.org/10.1016/0015-0568(84)90035-6
- T.-I. Lee, C. Kim, M. S. Kim and T.-S. Kim, "Flexural and tensile moduli of flexible FR4 substrates", Polym. Test., 53, 70 (2016). https://doi.org/10.1016/j.polymertesting.2016.05.012
- A. Volinsky, J. Vella, I. Adhihetty, V. Sarihan, L. Mercado, B. Yeung, et al., "Microstructure and mechanical properties of electroplated Cu thin films", MRS Proc., 649, Q5.3 (2000).
- B. Weiss, V. Groger, G. Khatibi, A. Kotas, P. Zimprich, R. Stickler, et al., "Characterization of mechanical and thermal properties of thin Cu foils and wires", Sens. Actuators, A, 99, 172 (2002). https://doi.org/10.1016/S0924-4247(01)00877-9
- Y. Denis and F. Spaepen, "The yield strength of thin copper films on Kapton", J. Appl. Phys., 95, 2991 (2004). https://doi.org/10.1063/1.1644634
- Reddy, JN, "Mechanics of Laminated Composited Plates and Shells: Theory and Analysis", 2nd ed., CRCPress, NewYork, (2004).
- Tao Zhou, Pulin Nie, Heping Lv, Qiulong Chen and Xun Cai, "Assessment of elastic properties of coatings by three-point bending and nanoindentation", J. Coat. Technol. Res., 8, 355 (2011). https://doi.org/10.1007/s11998-010-9313-y