참고문헌
- K. H. Lee, "Application of Plating Simulation for PCB and Packaging Process(in Kor.)", J. Microelectron. Packag. Soc., 19(3), 1 (2012). https://doi.org/10.6117/kmeps.2012.19.3.001
- K. Y. Lee, H. J. Won, S. W. Jun, T. S. Oh, J. Y. Byun and T. S. Oh, "Electrical Resistivity and Solder-Reaction Characteristics of Ni Films Fabricated By Electroplating(in Kor.)", J. Microelectron. Packag. Soc., 12(3), 253 (2005).
- S. Y. Chun, I. S. Kang, Y. M. Rhym, D. H. Kim and J. H. Lee, "Comparison of Acidic and Alkaline Bath in Electroless Nickel Plating on Porous Carbon Substrate(in Kor.)", J. Kor. Inst. Surf. Eng., 43(2), 105 (2010). https://doi.org/10.5695/JKISE.2010.43.2.105
- Y. S. Huang and F. Z. Cui, "Effect of complexing agent on the morphology and microstructure of electroless deposited Ni-P alloy", Surf. Coat. Tech., 201, 5416 (2007). https://doi.org/10.1016/j.surfcoat.2006.07.189
-
S. Alirezaei, S.M. Monirvaghefi, M. Salehi and A. Saatchi, "Wear behavior of Ni-P and Ni-P-
$Al_2O_3$ electroless coatings", Wear, 262, 978 (2007). https://doi.org/10.1016/j.wear.2006.10.013 - P. L. Neto, A. N. Correia and G. P. Silva, "Structural and Morphological Investigations of the Electrodeposited Cr and Ni-Cr-P Coatings and their Electrochemical Behaviors in Chloride Aqueous Medium", J. Braz. Chem. Soc., 17(7), 1419 (2006). https://doi.org/10.1590/S0103-50532006000700032
- W. Pfeiffer, C. Koplin, E. Reisacher and J. Wenzel, "Residual Stresses and Strength of Hard Chromium Coatings", Materials Science Forum, 681, 133 (2011). https://doi.org/10.4028/www.scientific.net/MSF.681.133
- M. H. Sohi, A. A. Kashi and S. M. M. Hadavi, "Comparative tribological study of hard and crack-free electrodeposited chromium coatings", J. Mat. Pro. Tech., 138, 219 (2003). https://doi.org/10.1016/S0924-0136(03)00075-X
- M. Kohl, "A process for the direct or indirect electrodeposition of a highly corrosion resisting crack free technical hard chromium plating layer", UK Patent, GB2236763A (1991).
- H. R. Cho, J. S. Bang, B. H. Rhee, K. J. Lee, B. Lim, Y. M. Han and H. S. Choi, "Development of Ni/Cr Plating Process for LRE Thrust Chamber(in Kor.)", KSPE Fall Conference, 603 (2009).
- M. H. Choi, Y. B. Park, B. H. Rhee, E. Byon and K. H. Lee, "Effect of Heat Treatment on Interface Behavior in Ni-P/Cr Double Layer(in Kor.)", J. Kor. Inst. Surf. Eng., 48(6), 260 (2015). https://doi.org/10.5695/JKISE.2015.48.6.260
- S. R. Ryu, S. J. Myung, B. K. Koo, B. D. Kang, J. C. Ryu and D. J. Kim, "Effect of Annealing Conditions on Properties of Ni-Cr Thin Film Resistor(in Kor.)", J. Microelectron. Packag. Soc., 11(1), 37 (2004).
- D. Nava, C. E. Davalos, A. M. Hernandez, F. Manriquez, Y. Meas, R. O. Borges, J. J. Bueno and G. Trejo, "Effects of Heat Treatment on the Tribological and Corrosion Properties of Electrodeposited Ni-P Alloys", Int. J. Electrochem. Sci., 8, 2670 (2013).
- B. Lim, K. J. Lee, Y. M. Han and H. S. Choi, "Results of Repeated Thermal Shock Tests on Coating Methods for Combustion Chamber of Liquid Rocket Engine(in Kor.)", Korea Aerospace Research Institute symposium, 16 (2008).
- C. F. Malfatti, J. Z. Ferreira, C. T. Olveira, E. S. Rieder and J. P. Bonino, "Electrochemical behavior of Ni-P-SiC composite coatings: Effect of heat treatment and SiC particle incorporation", Materials and Corrosion, 63(1), 36 (2012). https://doi.org/10.1002/maco.200905611
- D. B. Lewis and G. W. Marshall, "Investigation into the structure of electrodeposited nickel-phosphorus alloy deposits", Surf. Coat. Technol., 78, 150 (1996). https://doi.org/10.1016/0257-8972(94)02402-2
- E. Menthe and K.-T. Rie, "Plasma nitriding and plasma nitrocarburizing of electroplated hard chromium to increase the wear and the corrosion properties", Surface & coating tech., 112, 217 (1999). https://doi.org/10.1016/S0257-8972(98)00793-2
피인용 문헌
- 전해 Cr/Ni-P 도금막의 열 사이클 신뢰성 및 균열거동 분석 vol.26, pp.4, 2016, https://doi.org/10.6117/kmeps.2019.26.4.133