한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제19권4호
  • /
  • Pages.469-475
  • /
  • 2016
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

상변화 물질을 이용한 열전지 단열성능 향상에 관한 연구

Enhancement of Thermal Insulation Performance with Phase Change Material for Thermal Batteries

  • 이재인 (국방과학연구소 제4기술연구본부) ;
  • 하상현 (국방과학연구소 제4기술연구본부) ;
  • 김기열 (국방과학연구소 제4기술연구본부) ;
  • 정해원 (국방과학연구소 제4기술연구본부) ;
  • 조성백 (국방과학연구소 제4기술연구본부)
  • Lee, Jaein (The 4th Research and Development Institute, Agency for Defense Development) ;
  • Ha, Sang-hyeon (The 4th Research and Development Institute, Agency for Defense Development) ;
  • Kim, Kiyoul (The 4th Research and Development Institute, Agency for Defense Development) ;
  • Cheong, Haewon (The 4th Research and Development Institute, Agency for Defense Development) ;
  • Cho, Sungbaek (The 4th Research and Development Institute, Agency for Defense Development)
  • 투고 : 2015.11.25
  • 심사 : 2016.07.08
  • 발행 : 2016.08.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Thermal batteries are primary reserve power sources, which are activated upon the melting of eutectic electrolytes by the ignition of heat sources. Therefore, sufficient thermal insulation is absolutely needed for the stable operation of thermal batteries. Currently, excessive amount of heat sources is being used to compensate the heat loss in the cell stack along with the insertion of metal plates and thermal insulators to reserve heat at the both ends of cell stack. However, there is a possibility that the excessive heat flows into the cell stack, causing a thermal runaway at the early stage of discharge. At the same time, the internal temperature of thermal batteries cannot be maintained above the battery operating temperature at the later stage of discharge because of the insufficient insulation. Therefore, the effects of Phase Changing Material(PCM) plates were demonstrated in this study, which can replace the metal and insulating plates, to improve the thermal insulation performance and safety of thermal batteries.

키워드

참고문헌

  1. R. A. Guidotti, P. Masset, "Thermally Activated Battery Technology: Part I: An Overview," Journal of Power Sources, Vol. 161, pp. 1443-1449, 2006. https://doi.org/10.1016/j.jpowsour.2006.06.013
  2. David Linden, Thomas B. Reddy, "Handbook of Batteries 3rd Edition," McGraw-Hill, USA, p. 21.1, 2002.
  3. P. J. Masset, R. A. Guidotti, "Thermally Activated Battery Technology: Part II: Molten Salt Electrolytes," Journal of Power Sources, Vol. 164, pp. 397-414, 2007. https://doi.org/10.1016/j.jpowsour.2006.10.080
  4. R. Schieck, A. Hartmann, S. Fiechter, R. Konenkamp, H. Wetzel, "Electrical Properties of Natural and Synthetic Pyrite($FeS_2$) Crystals," Journal of Material Research, Vol. 5, Issue 7, pp. 1567-1572, 1990. https://doi.org/10.1557/JMR.1990.1567
  5. Y. Hong, B. Fegley Jr, "The Kinetics and Mechanism of Pyrite Thermal Decomposition," Berichte der Bunsengesellschaft fur physikalische chemie, Vol. 101, Issue 12, pp. 1870-1881, 1997. https://doi.org/10.1002/bbpc.19971011212
  6. J. P. Pemsler, R. K. F. Lam, J. K. Litchfield, S. Dallek, B. F. Larrick, B. C. Beard, "Discharge Behavior and Thermal Stability of Synthetic $FeS_2$ Cathode Material," Journal of Electrochemical Society, Vol. 137, Issue 1, pp. 1-7, 1990. https://doi.org/10.1149/1.2086362
  7. P. J. Masset, R. A. Guidotti, "Thermally Activated Battery Technology: Part IIIa: $FeS_2$ Cathode Material," Journal of Power Sources, Vol. 177, pp. 595-609. 2008. https://doi.org/10.1016/j.jpowsour.2007.11.017
  8. H. Mehling, L. F. Cabeza, "Heat and Cold Storage with PCM; An up to Date Introduction into Basics and Applications," Springer, USA, p. 11, 2008.
  9. R. A. Guidotti, P. J. Masset, "Thermally Activated Battery Technology: Part IV: Anode Material," Journal of Power Sources, Vol. 183, pp. 388-398, 2008. https://doi.org/10.1016/j.jpowsour.2008.04.090
  10. S. Fujiwara, M. Inaba, A. Tasaka, "New Molten Salt Systems for High Temperature Molten Salt Batteries: Ternary and Quaternary Molten Salt Systems based on LiF-LiCl, LiF-LiBr, and LiCl- LiBr," Journal of Power Sources, Vol. 196, pp. 4012-4018, 2011. https://doi.org/10.1016/j.jpowsour.2010.12.009