• KIEAE Journal
• /
• v.17 no.3
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1087-1093
• /
• 2010

The satellite thermal control H/W composed of two parallel channels working for heat pipe (HP) and phase change material (PCM) is suggested for the high heat dissipating component which works intermittently with short duty. In a limited point of view, the HP-PCM device is a kind of off-the-shelf component that requires no dedicated configuration and thermal designs to PCM. Therefore, it can be used with less impact on the program cost and schedule different from most of the PCM applications. In present study the typical honeycomb structure radiator applying the HP-PCM device is designed and the detail thermal math model is developed for numerical analyses. The result comparison between without and with PCM shows that the HP-PCM device redistributes the peak heat around the whole mission period through the alternate melting and freezing of PCM, and, as a result, the maximum and minimum temperatures are effectively alleviated. The drawback of PCM application due to low thermal conductivity can be successfully resolved by means of parallel arrangement of HP channel.

• Solar Energy
• /
• v.17 no.2
• /
• pp.67-74
• /
• 1997

Spherical shape of phase change material(PCM) has been prepared by using sodium acetate trihydrate as a latent heat storage medium. Gelatin was used as an effective thickener to prevent undesirable phase separation. Sodium pyrophosphate decahydrate was used as nucleator to decrease the degree of supercooling in the thickened phase change material. Spherical PCM particles of 3-3.5 mm in diameter continuously manufactured with molten PCM with those conditions. The particle size of PCM was not affected by the effluent velocity of molten PCM in range of 1.3-1.8 ml/min. DSC, SEM and XRD were also used to characterize the properties of PCM particles.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.102-107
• /
• 2009

The Possibilistic C-means(PCM) was proposed to overcome some of the drawbacks associated with the Fuzzy C-means(FCM) such as improved performance for noise data. However, PCM possesses some drawbacks such as sensitivity in initial parameter values and to patterns that have relatively short distances between the prototypes. To overcome these drawbacks, we propose an interval type 2 fuzzy approach to PCM by considering uncertainty in the fuzzy parameter m in the PCM algorithm.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.43-48
• /
• 2015

Purpose: Recently, many countries around the world are actively looking for the ways to make full use of natural energy sources and also develop and apply an environmentally friendly system designed to save building energy consumption. Under these circumstances, this study intended to determine the applicability and energy saving effect by deriving the indoor thermal performance characteristics and the PCM temperature appropriate for a double skin façade to reduce indoor energy consumption through the application of different PCM temperatures to double skin façade and perform a performance evaluation depending on the application or non-application of PCM to a double skin façade. Method: For this study, the physical variables of the double skin façade with PCM were configured through a preliminary examination based on an experimental measurement, and experimental measurements were taken with a total of 7 types of mockup cases: Type-1 (Basic), the basic double skin façade, Type-2 (PCM $18^{\circ}C$) which was applied to the inner skin of the double skin façade depending on the phase-change temperature of PCM, Type-3 (PCM $20^{\circ}C$), Type-4 (PCM $22^{\circ}C$), Type-5 (PCM $24^{\circ}C$), Type-6 (PCM $26^{\circ}C$), and Type-7 (PCM $28^{\circ}C$) with reference to the data analysis of the basic double skin façade which preceded this study, to analyze the indoor thermal performance of the double skin façade depending on PCM temperature and the installation or non-installation of a double skin façade applying PCM based on the selected unit space. Result: Indoor thermal performance was analyzed depending on the PCM temperature applicable to double skin façade, and the analysis of heating energy reduction showed that Type-2 (PCM $18^{\circ}C$) gained 15.9% more heat compared with Type-1 (Basic) and secondly, Type-3 (PCM $20^{\circ}C$) gained 11.5% more heat. Based on these findings, it is deemed possible that the use of energy for heating can be reduced when heat coming indoors increases during the heating period, and the appropriate temperature for PCM applied to the inner skin of a double skin façade to reduce heating energy in winter, Type-2 (PCM $18^{\circ}C$) showed the highest efficiency and Type-3 (PCM $20^{\circ}C$) was also deemed appropriate.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.88-93
• /
• 2015

In modern computer systems, DRAM is commonly used as main memory due to its low read/write latency and high endurance. However, DRAM is volatile memory that requires periodic power supply (i.e., memory refresh) to sustain the data stored in it. On the other hand, PCM is a promising candidate for replacement of DRAM because it is non-volatile memory, which could sustain the stored data without memory refresh. PCM is also available for byte-addressable access and in-place update. However, PCM is unsuitable for using main memory of a computer system because it has two limitations: high read/write latency and low endurance. To take the advantage of both DRAM and PCM, a hybrid main memory, which consists of DRAM and PCM, has been suggested and actively studied. In this paper, we propose a novel page replacement algorithm for hybrid main memory. To cope with the weaknesses of PCM, our scheme focuses on reducing the number of PCM writes in the hybrid main memory. Experimental results shows that our proposed page replacement algorithm reduces the number of PCM writes by up to 80.5% compared with the other page replacement algorithms.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.117-123
• /
• 2016

In general, PCM (Phase Change Memory) is unsuitable as a main memory because it has limitations: high read/write latency and low endurance. However, the DRAM&PCM hybrid memory with the same level is one of the effective structures for a next generation main memory because it can utilize an advantage of both DRAM and PCM. Therefore, it needs an effective page management method for exploiting each memory characteristics dynamically and adaptively. So we aim reducing an access time and write count of PCM by using an effective page replacement. According to our simulation, the proposed algorithm for the DRAM&PCM hybrid can reduce the PCM access count by around 60% and the PCM write count by 42% given the same PCM size, compared with Clock-DWF algorithm.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1071-1077
• /
• 2015

In this paper, we adopt PCM (phase-change memory) as a virtual memory swap device and present a new page replacement policy that considers the characteristics of PCM. Specifically, we aim to reduce the write traffic to PCM by considering the dirtiness of pages when making a replacement decision. The proposed policy tracks the dirtiness of a page at the granularity of a sub-page and replaces the least dirty page among the pages not recently used. Experimental results show that the proposed policy reduces the amount of data written to PCM by 22.9% on average and up to 73.7% compared to CLOCK. It also extends the lifespan of PCM by 49.0% and reduces the energy consumption of PCM by 3.0% on average.

• Journal of Adhesion and Interface
• /
• v.6 no.1
• /
• pp.11-18
• /
• 2005

The capsules were prepared from a phase change material (PCM) of octadecane as a core material and melamine formaldehyde resin as a shell material. The PCM capsule size was varied in the range of $3{\sim}25{\mu}m$. The core contents and sizes of the PCM capsule, were determined by DSC and SEM, respectively. An acrylic coating material which contains butyl acrylate (BA), methyl metacrylate (MMA) and acrylic acid (AA) were synthesized by emulsion polymerization. The films were prepared from the acrylic emulsion and PCM capsules which have various capsule sizes. From the results of SEM experiment, it was observed that the PCM capsules were well dispersed inside the film and the surface of the film became less rough when the PCM capsule size was small. The swelling ratio of the films were not significantly affected by the PCM capsule size. However, the tensile strength and elongation of the films were greatly decreased with increasing the PCM capsule size.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.35-35
• /
• 2011

Phase change material(PCM) has thermal energy storage and been attracted attention. Latent heat of the organic PCM can keep maintaining temperature when the change of outside energy conditions influence to PCM. Thus, many researchers have interested to thermal energy storage ability and investigated to applications such as thermal storage of solar energy, bioclimatic building, icebank, medical application, clothing industry and so on. Among the many applications, investigation of the PCM in clothing industry is also important because the people has interest functional factor called health-care in the clothing. In addition, PCM can give them mild environment condition such suitable temperature control or humidity. To fabrics, the PCM has various methods such as microcapsule, padding and modified cross-section formation(Sheath/core). Sheath core PCM fabric has a better benefit of durability than other method. However, PCM sheath/core spinning is difficult. In addition, dyeing property is important to use clothing industry due to visual images. In this study, we investigated dyeing properties of Nylon/PCM sheath/core fabrics. Especially, we observed the relation between dyeing property and PCM including ratio. Various temperature and pH conditions were also studied to optimize dyeing properties as acid dye.