DOI QR코드

DOI QR Code

The Effect of Glue Solution on Manufacturing of White Clay Pigment

백토안료의 전통제법 중 아교수 영향에 관한 연구

  • Kang, Yeong Seok (Restoration Technology Division, National Research Institute of Cultural Heritage) ;
  • Jeong, Hye Young (Restoration Technology Division, National Research Institute of Cultural Heritage) ;
  • Go, In Hee (Restoration Technology Division, National Research Institute of Cultural Heritage)
  • 강영석 (국립문화재연구소 복원기술연구실) ;
  • 정혜영 (국립문화재연구소 복원기술연구실) ;
  • 고인희 (국립문화재연구소 복원기술연구실)
  • Received : 2016.08.05
  • Accepted : 2016.09.19
  • Published : 2016.09.20

Abstract

The effect of the glue solution were investigated in the grinding and elutriation process for manufacturing of White clay pigment. In grinding process, glue solution decreased the production of a too fine powder and enhanced the degree of sorting of ground pigments. The grinding performance and limit are generally influenced by the frictional force. Therefore, the friction force was measured in accordance with the grinding conditions. As a result of measuring a friction force, when using glue solution it showed the lowest friction. Finally, the application of glue solution in grinding process is believed to enhance the degree of sorting of ground pigments by reducing frictional force. In elutriation process, the application of glue solution enabled the screening of larger particles in the same conditions by reducing the sedimentation velocity. This result is due to increase in the viscosity of the glue solution according to glue concentration. As a result, the application of glue solution in elutriation process is though to enlarges the range of the selectable particle size and to enable the segmentation of the particles.

백토안료의 제조 공정 중 분쇄 및 수비단계에서 아교수를 적용하고 이에 따른 영향을 분석하였다. 분쇄 공정에서 아교수를 적용한 경우, 일반 증류수를 사용했을 때보다 미분의 생성량이 감소하고 분급도가 향상되는 것으로 나타났다. 일반적으로 분쇄 성능 및 분쇄 한계에는 마찰력이 많은 영향을 미친다. 따라서 분쇄 조건에 따른 마찰력을 측정한 결과, 아교수를 적용한 경우 상대적으로 마찰력이 감소하는 것으로 확인되었다. 결국 분쇄 공정에서 아교수를 사용하는 것은 마찰력을 감소시켜 결과적으로 분급도를 향상시키기 위한 것으로 판단된다. 안료 제조 공정 중 수비단계에서 아교수를 적용한 결과, 아교수 적용 시 동일한 조건에서 보다 큰 입도의 입자를 수비해 내는 것이 가능한 것으로 나타났다. 이와 같은 결과는 수비액으로 아교수를 사용한 경우, 아교의 농도가 증가함에 따라 수비액의 점도가 증가하여 입자의 침강속도가 감소하기 때문인 것으로 확인되었다. 결국 수비 공정에서 아교수를 사용한 것은 수비액의 점도를 증가시켜 수비를 통해 선별할 수 있는 입도의 범위를 확대하고, 보다 세밀한 입도 구간으로 입자를 선별하기 위한 것으로 판단된다.

Keywords

References

  1. Cultural Heritage Administration and Research Institute of Sungbo Cultural Heritage, 2011, Mural painting of temple in Korea (Gyeongsangbuk-do 2). Cheonilmunhwasa, Seoul, 691-775. (in Korean)
  2. Gwak, D.H., 2012, Literature research of Korea traditional pigment. Hagyeonmunhwasa, Seoul, 49-53. (in Korean)
  3. Jang, G.I., 2004, Dancheong. Boseonggak, Seoul, 77-78. (in Korean)
  4. Jang, G.I., 2004, Dancheong. Boseonggak, Seoul, 77-78. (in Korean)
  5. Jeong, J.M,, 2001, Color and paint our painting. Hakgojae, Seoul, 43. (in Korean)
  6. Kotake, N., Kuboki, M., Kiya, S. and Kanda, Y., 2011, Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill. Adv. Powder Technol., 22, 86-92. https://doi.org/10.1016/j.apt.2010.03.015
  7. Lee, H.H., Park, J.H., Hong, J.O., Han, M.S., Seo, M.S. and Heo, J.S., 2012, The analytical study of pigments on Fourguardian statues in Song-gwang Buddhist temple in Suncheon. Munhwajae Korean Journal of Cultural Heritage Studies, 45(1), 122-147. (in Korean with English abstract)
  8. Moon, D.H., Kim, J.H., Lee, J.J., Han, M.S. and Cho, H.G., 2015, Applicability as a white pigment raw materials of white soils from around the Sancheong-Hadong and Gayasan area. The Mineralogical Society of Korea and the Petrological Society of Korea, Proceedings of the Annual Joint Conference, 138-139. (in Korean)
  9. Moon, S.Y., 2010, A study of pigments applied on paintings since the mid-Joseon dynasty. Ph.D. thesis, Chung-ang University, Seoul, 167-170. (in Korean with English abstract)
  10. National Museum of Korea, 2007, Korean Paintings and Calligraphy of National Museum of Korea Vol.15, Joseon Portraits I. Nurwa, Seoul, 262-264. (in Korean)
  11. Ozkan, A., Yekeler, M. and Calkaya, M., 2009, Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding. International Journal of Mineral Processing, 90, 67-73. https://doi.org/10.1016/j.minpro.2008.10.006

Cited by

  1. The Characteristics of the White Clay Pigment Manufactured from the White Clay of Producing Area Recorded in Old Documents vol.33, pp.6, 2017, https://doi.org/10.12654/JCS.2017.33.6.08