참고문헌
- Lee, J., Cho, Y. and Jeong, K., 2009, "Material Characterization of Lock Plate Using Guided Wave," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 4, pp. 373-379. https://doi.org/10.3795/KSME-A.2009.33.4.373
- Cho, Y., Jung, K. and Lee, J., 2010, "Use of Guided Waves for Monitoring Material Conditions in Fossil-Fuel Power Plants," Trans Korean Soc. Mech. Eng. A, Vol. 34, No. 6, pp. 695-700. https://doi.org/10.3795/KSME-A.2010.34.6.695
- Alleyne, D. N. and Cawley, P., 1992, "The Interaction of Lamb Waves with Defects," Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, Vol. 39, No. 3, pp. 381-397. https://doi.org/10.1109/58.143172
- Rose, J., Ditri, J. J., Pilarski, A., Rajana, K. and Carr, F., 1994, "A Guided Wave Inspection Technique for Nuclear Steam Generator Tubing," NDT & E International, Vol. 27, No. 6, pp. 307-310. https://doi.org/10.1016/0963-8695(94)90211-9
- Rose, J. L., Jiao, D. and Spanner Jr, J., 1996, "Ultrasonic Guided Wave NDE for Piping," Materials Evaluation, Vol. 54, No. 11, pp. 1310-1313.
- Lowe, M. J., Alleyne, D. N. and Cawley, P., 1998, "Defect Detection in Pipes Using Guided Waves," Ultrasonics, Vol. 36, No. 1, pp. 147-154. https://doi.org/10.1016/S0041-624X(97)00038-3
- Shin, H. J. and Rose, J. L., 1998, "Guided Wave Tuning Principles for Defect Detection in Tubing," Journal of nondestructive evaluation, Vol. 17, No. 1, pp. 27-36. https://doi.org/10.1023/A:1022680429232
- Demma, A., Cawley, P., Lowe, M. and Roosenbrand, A., 2003, "The Reflection of the Fundamental Torsional Mode From Cracks and Notches in Pipes," The Journal of the Acoustical Society of America, Vol. 114, No. 2, pp. 611-625. https://doi.org/10.1121/1.1582439
- Demma, A., Cawley, P., Lowe, M., Roosenbrand, A. and Pavlakovic, B., 2004, "The Reflection of Guided Waves From Notches in Pipes: a Guide for Interpreting Corrosion Measurements," Ndt & E International, Vol. 37, No. 3, pp. 167-180. https://doi.org/10.1016/j.ndteint.2003.09.004
- Carandente, R., Ma, J. and Cawley, P., 2010, "The Scattering of the Fundamental Torsional Mode from Axi-symmetric Defects with Varying Depth Profile in Pipes," The Journal of the Acoustical Society of America, Vol. 127, No. 6, pp. 3440-3448. https://doi.org/10.1121/1.3373406
- Ratassepp, M., Fletcher, S. and Lowe, M., 2010, "Scattering of the Fundamental Torsional Mode at an Axial Crack in a Pipe," The Journal of the Acoustical Society of America, Vol. 127, No. 2, pp. 730-740. https://doi.org/10.1121/1.3277185
- Achenbach, J. D., 2003, Reciprocity in Elastodynamics, Cambridge University Press, pp. 55-115.
- Achenbach, J., 2000, "Calculation of Surface Wave Motions Due to a Subsurface Point Force: An Application of Elastodynamic Reciprocity," The Journal of the Acoustical Society of America, Vol. 107, No. 4, pp. 1892-1897. https://doi.org/10.1121/1.428470
- Achenbach, J., 2005, "Combination of a Virtual Wave and the Reciprocity Theorem to Analyse Surface Wave Generation on a Transversely Isotropic Solid," Philosophical Magazine, Vol. 85, No. 33-35, pp. 4143-4157. https://doi.org/10.1080/14786430500363254
- Hao, S., Strom, B. W., Gordon, G., Krishnaswamy, S. and Achenbach, J. D., 2011, "Scattering of the Lowest Lamb Wave Modes by a Corrosion Pit," Research in Nondestructive Evaluation, Vol. 22, No. 4, pp. 208-230. https://doi.org/10.1080/09349847.2011.594766
- Phan, H., Cho, Y. and Achenbach, J. D., 2013, "Application of the Reciprocity Theorem to Scattering of Surface Waves by a Cavity," International Journal of Solids and Structures, Vol. 50, No. 24, pp. 4080-4088. https://doi.org/10.1016/j.ijsolstr.2013.08.020