DOI QR코드

DOI QR Code

Estimation of Standard Load for Disaster-Resistant Design of Outdoor Signboards

내재해형 옥외광고물 설계를 위한 표준하중 산정

  • Lee, Sungsu (School of Civil Eng., Chungbuk National Univ.) ;
  • Kim, Junyeong (Department of Civil System Eng., Chungbuk National Univ.) ;
  • Ham, Hee Jung (Department of Architectural Eng., Kangwon National Univ.) ;
  • Kim, Ji Young (DAEWOO Institute of Construction Technology)
  • Received : 2015.10.12
  • Accepted : 2016.02.23
  • Published : 2016.04.29

Abstract

Recent destructions of outdoor signboards have frequently been caused by strong wind, resulting in damage on the property and human livelihood. One of the major causes of the problems is inadequate implementation of structural design code to the outdoor signboards which are vulnerable to wind. This leads to this paper to present the design guideline of wind-resistant outdoor signboards. In order to estimate the design wind speed, basic wind speeds over Korea suggested by KBC(2015)(revision) are corrected with land surface roughness and topography of the terrain and installation height of the signboard. This paper also suggested the procedure of wind load estimation for different types of outdoor signboards; wall attached type, wall ribbed type and ground erected type. Since the process involves complex calculation to some extent, this paper presents summarized version of wind load estimation from non-professional point of view.

최근 강풍으로 인한 옥외광고물의 파손 및 추락으로 인해 불특정 다수에게 인적 및 물적 피해를 야기하고 있다. 옥외광고물은 사유시설과 공공시설물의 성격을 모두 갖기 때문에 옥외광물로 인한 피해를 저감하는 것은 개인의 노력뿐 아니라 제도 및 규정을 통해서도 이루어져야한다. 이러한 피해는 강풍에 취약한 옥외광고물의 내풍설계 기준의 미비가 가장 큰 요인으로 인식되고 있어 본 연구에서는 옥외광고물의 내풍설계 표준을 제시하였다. 이를 위해 풍속에 영향을 주는 옥외광고물 설치위치의 주변 풍환경이나 높이, 설치위치 등 풍속과 관련한 요소를 반영하였으며, 건축구조기준 2015(안)의 기본풍속도와 풍속보정 절차에 의한 풍하중 산정 과정을 제시하였다. 이 과정에서 공학적 판단이 요구되는 옥외광고물 설치위치 주변의 지표 조도구분 및 지형계수 평가에 대해 정략적으로 적용할 수 있는 기준을 제시하였다. 또한 비전문가 관점에서 적용하기 용이하도록 가능한 단순화된 정량화 절차를 제시하였다.

Keywords

References

  1. Architectural Institute of Korea(AIK) (2015) Korea Building Code (revision) (in Korean).
  2. Kim. C.K., Hong, G.H., Gho, I.D. (2008) Development Strategy for a Facilities Safety Management System Based on NGIS. J, Comput. Struct. Eng. Korea, 21(5), pp.505-514.
  3. Korea Out of Home Advertising Center (2013) Management Manual for Safety of outdoor Signboards.
  4. Korea Out of Home Advertising Center (2012) 2012 Statistics of Outdoor Signboards.
  5. Ministry of Land, Transport and Maritime Affairs(MOLTMA) (2010) Highway Bridge Design Code. Korea Road & Transpotation Association. (in Korean).
  6. Ministry of Public Safety and Security (2013) Safety Installation Standards and Product Development with High Performance for the Damage Reduction of Outdoor Advertising Product by Strong Wind.
  7. Ministry of Public Safety and Security (2015) Development of Wind Resistance Mitigation Technology with Considerations of Urban Climate and Environmental Change.
  8. Standards Australia/Standards New zealand, Australian/New Zealand Standard, Structural Design Action, Part 2: Wind Actions, AS/NZS 1170.2:2002 (2002) Standards Australia, Sydney.
  9. Simiu, E., Scanlan, R. H. (1996) Wind Effect on Structures Third Edition, John Wiley & Sons. New York, USA.
  10. Wieringa, J. (1992) Updating the Davenport Roughness Classification. J. Wind Eng. & Industrial Aerodyn., 41, pp.367-368.
  11. Wieringa, J. (1993) Representative Roughness Parameters for Homogeneous Terrain. Boundary-Layer Meteorol., 63, pp.323-363. https://doi.org/10.1007/BF00705357