• Title/Summary/Keyword: 지형계수

Search Result 505, Processing Time 0.032 seconds

A Study on the Importance of Topography Elements for Critical Duration Estimation (임계지속시간 추정을 위한 지형 인자의 중요도에 관한 연구)

  • Kim, Minhwan;Na, Gibok;Ceon, Irkweon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.329-333
    • /
    • 2019
  • 안전한 수공구조물의 설계를 위하여 가장 큰 홍수량이 유발되는 지속시간 즉, 임계지속시간을 적용할 필요가 있다. 임계지속시간은 유역의 지형 인자 특성에 따라 상이 하다. 다양한 연구자들에 의하여 임계지속 시간은 유역의 지형 인자를 고려하여 추정할 수 있고, 이의 추정에 지형 인자를 고려하는 것이 합리적인 것으로 제안하였다. 본 연구에서는 기존에 발표된 임계지속시간 추정에 관련된 연구 성과를 분석하고, 이를 토대로 다양한 지형특성을 포함하고 있는 유역의 하천에 대하여 지형 인자가 임계지속시간을 추정에 기여하는 중요도를 분석하였다. 각 지형 인자의 중요도 판단 지표로는 베타계수를 활용하였다. 형상계수의 크기에 따라 지형 인자의 중요도는 상이 하였다. 임계지속시간을 지형 인자를 활용하여 회귀모형으로 추정할 때 각 인자의 중요도를 고려하여 변수를 선택하면 상관성이 향상될 수 있을 것으로 기대된다.

  • PDF

Estimating Method of Topographic Factor of Design Wind Speed Using GIS (GIS를 이용한 지형에 의한 풍속할증계수 산정 방법)

  • Choi, Se-Hyu;Seo, Eun-Su
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.16 no.3
    • /
    • pp.126-135
    • /
    • 2013
  • With more than 70% of the country consisting of mountains, Korea has large and small mountains, and hills located in the inner cities. Therefore, Korea's architectural structure laws stipulate that an increase in wind speed due to the influence of terrain should be considered in the design of wind loads of buildings. But if more than two mountains are located around the building or if the boundaries of the land surface are not clear when calculating topographic factors of wind speed, the designer has subjectively selected the coverage of the topographic factors of wind speed or the surface. This may lead to unscientific design of wind loads. This study attempts to analyze topographic factors of wind speed by using a 1:5000 topographic map with relatively high location accuracy and thereby to reflect changes due to the topographic characteristics and influence at the point where the building is located. By also selecting terrain surfaces and vertexes through Arc GIS and presenting a scientific approach to determine the range of topographic factors of wind speed, this study is expected to make a contribution for more rational and cost-effective wind-resistant design of buildings.

Analysis of Relationships Between Topography/Geology and Groundwater Yield Properties at Pohang using GIS (GIS를 이용한 포항시 지형 및 지질과 지하수 산출능력 간의 상관관계 분석)

  • Lee, Sa-Ro;Kim, Yong-Sung;Kim, Nam-Jin;Ahn, Kyoung-Hwan
    • Economic and Environmental Geology
    • /
    • v.41 no.1
    • /
    • pp.115-131
    • /
    • 2008
  • The aim of this study is to analyze relationships between topography/geology which affects physically groundwater regime and groundwater yield properties in Pohang City using Geographic Information System (GIS). For the purpose, topographic factors such as ground elevation, ground elevation difference, ground slope, and ground regional slope, and hydrogeologic unit, and groundwater yield properties factors such as transmissivity, specific capacity, and well yield, were constructed to spatial data base. Then the relationships between topography, geology and groundwater yield properties were analyzed quantitatively using GIS overlay technique. As the results, ground-water yield of unconsolidated sediments and porous volcanic rocks is the highest among the hydrogeologic units of study area, and clastic sedimentary rock is the lowest. There are positive relationship between the elevation and elevation difference and the groundwater yield properties and negative relationship between the topographic slope and the groundwater yield properties.

Estimation of the Topographic Factor of Wind Speed Using GIS Information (GIS 정보를 이용한 풍속지형계수 산정)

  • Seong, Min-Ho;Choi, Se-Hyu
    • Spatial Information Research
    • /
    • v.19 no.5
    • /
    • pp.47-52
    • /
    • 2011
  • Recently damage scale by local winds and typhoon has dramatically increased. Korea has the terrain over 70% of the land and the planning of the wind load is necessary to estimate reflecting appropriately the change of the wind-speed according to the characteristic of the terrain and in the Korean Building Code(2009), this is stated and it reflects to the design process. However, in order to estimate the topographic factor of the wind speed considering the topographic characteristics in the structure design actually, it has many difficult points including the local topographic survey, etc. In this paper, the Digital Elevation Model(DEM) is created using TIN interpolation method in the form of the digital map and then the interface was designed and implemented which can automatically estimate the topographic factor of wind speed by using ESRI(R)ArcObjectTM and the Visual Basic programing language. By applying it to the terrain which positioned in the downtown area, the practicality of the topographic factor of wind speed estimation interface was checked.

Estimation of Topographic Factor of Wind Speed Using Geographic Information (지리정보를 이용한 풍속지형계수 산정)

  • Seong, Min-Ho;Park, Kyung-Sik;Choi, Se-Hyu
    • Spatial Information Research
    • /
    • v.18 no.3
    • /
    • pp.13-22
    • /
    • 2010
  • Due to the frequent gales and typhoons by anomaly climates and its subsequent loss of life and property, the importance of the research estimating wind load is being emphasized when structure is designed. It is necessary to measure geographical information exactly to estimate topographic factor of wind speed because the increase of topographic factor of wind speed means the increase of wind velocity and the increase of wind velocity has an influence on wind load proportionate to a square. Therefore, the accurate and reasonable estimation method of topographic factor of wind speed is presented in this study using ArchiCAD, an architectural BIM(Building Information Modeling) software. When the structure subjected to wind load is designed, reasonability and economic performance of design will be more improved by using the proposed method.

An analysis of the correlation for runoff characteristics with the geomorphological characteristics in the Han River basin (한강 유역의 지형학적 특성과 유출의 상관분석)

  • Lee, Ji Haeng;Lee, Woong Hee;Choi, Heung Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.36-36
    • /
    • 2017
  • 일반적으로 유역의 지형학적 특성을 나타내는 인자들은 유역면적, 유로연장, 유로경사 등 여러가지가 있다. Horton (1945)은 수계의 발달 형태에 기초한 하천의 차수를 이용하여 분기비, 길이비, 면적비, 하천 밀도 등 지형학적인 매개변수로 제시하였다. 유역 지형학적 매개변수는 Horton이 제시한 유역내 하도망의 지형학적인 구성에 대한 특성을 반영하는 것으로 유출에 지배적인 영향을 미친다. 한강 유역 19개 하천의 27개 지점을 대상으로 유출 특성과 지형학적 특성의 상관 분석을 위하여 유역과 하천의 지형학적 특성을 Arc-Map을 이용하여 구하였다. 하천차수법칙에 의한 지형학적인 매개변수로 분기비, 길이비, 함몰도, 면적비를 산정하였고, 유역의 지형학적 인자는 유역면적, 유로연장, 유로경사, 형상계수, 단일형상계수, 세장률, 수계밀도, 수계빈도를 산정하였다. 수계의 연간 유출률은 실측 유출량과 강수량 자료를 이용하여 산정하였다. 각각의 지형학적 특성인자에 대한 상관 매트릭스를 분석하고 그 상관특성을 분석하였다. 특히 지형학적 매개변수와 지형학적 요소와 연간 유출률과의 상관관계식을 제시하였다.

  • PDF

Determination of the Optimum Runoff Coefficient using GIS in the Route Design (GIS를 이용한 노선설계시의 최적 유출계수 결정)

  • Choi, Seok-Keun;Park, Myoung-Jin
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.16 no.3
    • /
    • pp.51-57
    • /
    • 2008
  • This study has been performed to define the standard of runoff coefficients which are applicable to the process of route design or various public facilities design. The application of accurate runoff coefficients is very important in construction works due to the fact that the abnormal weather and torrential downpour are raising. However, in Korea society, as planner's subjective judgement of an object region status would make the application of erroneous runoff coefficients, many problems have been occurred. Consequently, in this study, we could perform terrain analysis and rainfall basins extraction with GIS technoques and suggest the application standard of runoff coefficients in accordiance to terrain characteristics and the land covers. By having the application of the study results to past flooded areas, we could suggest improved plans.

  • PDF

Flux correction coefficient in numerical simulation of shallow-water flow over square-edged broad-crested weir (직각 광정 위어를 지나는 천수 흐름 모의에서 흐름률 보정 계수)

  • Seung-Yong Hwang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.503-503
    • /
    • 2023
  • Hwang(2022; J.KWRA, 55, 10)은 수심 적분 모형으로 불연속 지형을 경사로 완화하지 않고 직접 해석하는 Hwang(2015; J.KSCE, 35, 6)의 기법이 적용된 수치 모형의 정확도를 높이기 위해 지형 전면에 실제로 작용하는 정수압 분포와 차이를 해명하는 흐름률 보정 계수(flux correction coefficient)를 도입하였다. 직각 광정 위어 실험 중에서 널리 알려진 다섯 가지 월류 실험으로부터 218회의 시행을 추려 실험과 모의에서 월류량 값이 서로 잘 일치하는 흐름률 보정 계수를 각각 산정하였는데, 이때 광정 위어를 지나는 흐름을 모의하기 위해 계산 영역을 평면 2차원으로 두고 삼각형 계산 격자로 분할하였다(Hwang, 2022). 실험에 사용된 실험 수로들이 수로의 길이 방향으로 그 폭이 일정하므로 옆벽의 영향이 크지 않다면 수로의 단위 폭에 모형을 적용함으로써 계산 영역의 차원을 한 수준 낮출 수 있다. 실질적으로 1차원 모의가 되어 모의 시간을 획기적으로 줄일 수 있으므로 다양한 분석이 가능하겠으나, 2차원 모의로부터 결정된 흐름률 보정 계수를 수정없이 그대로 적용하는 것이 적절한지 검토할 필요가 있다. 이 연구에서는 Hwang(2022)이 검토한 218회의 직각 광정 위어 실험 시행에 수로의 단위 폭에 불연속 지형을 직접 해석할 수 있는 Hwang(2015)의 1차원 모형을 적용하고 모의와 실험에서 월류량의 차이가 최소가 되는 흐름률 보정 계수를 각각 산정하였다. 결정된 흐름률 보정 계수의 평균값을 별도로 선정된 두 가지 직각 광정 위어 실험에 적용하였으며, 보정에 따른 모형의 성능을 평가하기 위해 Willmott의 일치 지표(index of agreement)를 이용하였다. 흐름률 보정 계수를 적용하였을 때, 한 실험 경우에 대해 모형의 성능이 대폭 개선됨을 확인하였고 성능 개선이 미미한 나머지 실험 경우는 보정 전에 일치 지표가 이미 상당히 높은 편이었다. 2차원 문제에 이어 1차원 모형의 적용에서도 흐름률 보정 계수를 결정함으로써 계단이나 직립 보와 같은 불연속 지형을 넘나드는 천수 흐름의 월류량을 더 쉽고 정확하게 파악할 수 있을 것으로 기대된다.

  • PDF

Estimation of Roughness Coefficients Using Geographic Information of River (하천 지형 정보를 이용한 조도계수 산정)

  • Kim, Yong-Jeon;Kim, Ji-Sung;Lee, Chan-Joo;Kim, Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.327-327
    • /
    • 2011
  • 본 연구에서는 영국 환경청의 지원 하에 HR Wallingford에서 2003년에 개발한 Conveyance Estimation System(CES)을 이용하여 하천 조도계수를 산정해보고자 하였다. CES프로그램은 하천지형 정보인 단면 형상, 하상경사, 하상재료, 식생 상태 등의 정보를 바탕으로 임의 단면내 각 저항요인에 따라 프로그램에서 제시하고 있는 조도계수를 적용함으로써 수위변화에 따른 단면적, 유량, 통수능, 동수반경 등의 계산 결과를 제공한다. 이러한 계산 결과들을 Manning식에 대입함으로 써 유량 변화에 따른 조도계수를 산정할 수 있다. 섬진강 곡성 지점에 CES프로그램을 적용하여 계산된 조도계수를 실측 조도계수, 하천정비기본 계획에 제시된 조도계수와 비교하였다. 산정된 조도계수는 모두 유량 증가에 따라 감소하는 경향을 보이며, 약 $1,000m^3/s$이상의 고유량에서 실측자료를 이용하여 산정된 조도계수와 유사한 값에서 수렴하는 결과를 나타내고 있다. 섬진강 곡성지점 외에 추가 지점을 분석한 결과에서도 실측 조도계수와 CES를 이용한 조도계수가 큰 차이를 보이지 않았다. 따라서 CES프로그램을 이용하면 하천의 지형 정보만을 가지고도 조도계수, 수위-유량 관계식 등의 추정이 가능하기 때문에 실무적으로 유용하게 사용될 것이다.

  • PDF

2-D Numerical Simulation Considering Channel Topographical Features (하도의 지형특성을 고려한 2차원 수치모의)

  • Song, Seung-Won;Lyu, Si-Wan;Kim, Young-Do;Seo, Il-Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.853-857
    • /
    • 2009
  • 2차원 흐름해석 모형인 SMS(Surface-Water Modeling System)와 RAMS(River Analysis Modeling System)를 이용한 유속장 모의를 통해 Manning 조도계수와 와점성계수에 대한 민감도 분석을 수행하여 흐름특성은 Manning 조도계수에 큰 영향을 받음을 알 수 있었다. 본 연구에서는 Manning 조도계수의 변화를 통하여 실측치에 근사한 유속 분포의 모의결과를 도출하고자 현장실측을 통해 취득한 자료를 이용하여 2차원 수치모형의 모의결과와 비교하였다. 국가하천 형산강 본류 중 안강수위관측소에서 부조수위관측소 사이 약 4.3 km 의 구간을 모의구간으로 선정하였으며, $2006{\sim}2007$년에 걸쳐 취득된 현장실측자료를 바탕으로 매개변수 추정 및 모의결과와 비교하였다. 대상구간에 대한 모의결과의 정확도를 개선하기 위하여 하도의 지형특성 등을 고려하여 모의구간을 다수의 구획으로 구분한 후 수심 및 하도 평면선형을 고려한 Manning 조도계수를 차등적으로 할당하여 모의하였다. 이상의 과정을 통해 모의결과의 정확도 제고가 가능함을 관찰할 수 있었다.

  • PDF