References
- Kolsky, H., 1949, "An Investigation of the Mechanical Properties of Materials at very High Rates of Loading," Proc. Phys. Soc., B 62, 676 https://doi.org/10.1088/0370-1301/62/11/302
- Hopkinson, B., 1914, "A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets," Philos. Trans. R. Soc. Lond. Ser. A 213, 437-456. https://doi.org/10.1098/rsta.1914.0010
- Nicholas, T., 1981, "Tensile Testing of Materials at High Rates of Strain," Exp. Mech. pp. 177-185.
- Jung, D.-T., 1994, "Split Hopkinson Pressure Bar Technique for Stress-Strain Measurement," The Korean Society of Mechanical Engineers Annuals Spring & Fall Conferences, pp. 33-34.
- Kang, W.-J., Cho, S.-S., H, H., Jung, D.-T., 1997, "High Strain Rate Tensile Test of Sheet Metals with a New Tension Split Hopkinsn Bar," Trans. Korean Soc. Mech. Eng. A, Vol. 21, No. 12, pp. 2209-2219. https://doi.org/10.22634/KSME-A.1997.21.12.2209
- Pang, J.H.L, 2012. Lead Free Solder: Mechanics and Reliability, Springer.
- Nemat-Nasser, S., Isaacs, J.B., Starrett, J.E., 1991, "Hopkinson Techniques for Dynamic Recovery Experiments," Proc. R. Soc. Lond., Vol. 435, pp. 371-391. https://doi.org/10.1098/rspa.1991.0150
- Rittel, D., Lee, S., Ravichandran, G., 2002, "Large Strain Constitutive Behavior of OFHC Copper over a Wide Range of Strain-Rates Using the Shear Compression Specimen," Mechanics of Materials, Vol. 34, pp. 627-642. https://doi.org/10.1016/S0167-6636(02)00164-3
- Kim, Y., Shin, S.Y., Kim, Y.G., Kim, N.J., Lee, S., 2010, "Effects of Strain Rate and Test Temperature on Torsional Deformation Behavior of API X70 and X80 Linepipe Steels," Metall. Mater. Trans., Vol. 41A, pp. 1961-1972.
- Lindholm, U.S. and Yeakley, L.M., 1968, "High Strain-Rate Testing: Tension and Compression," Exp. Mech., Vol. 8, pp. 1-9. https://doi.org/10.1007/BF02326244
- Khan, A.S., Liu, J., Yoon, J.-W., Nambori, R., 2015, "Strain Rate Effect of High Purity Aluminum Single Crystals: Experiments and Simulations," International Journal of Plasticity, Vol. 67, pp. 39-52 https://doi.org/10.1016/j.ijplas.2014.10.002
- Badulescu. C., Grédiac. M., Haddadi. H., Mathias. J. -D., Balandraud. X., Tran. H. -S., 2011, "Applying the Grid Method and Infrared Thermography to Investigate Plastic Deformation in Aluminium Multicrystal," Mechanics of Materials, Vol.43, pp. 36-53 https://doi.org/10.1016/j.mechmat.2010.11.001
- Wang, Y. and Cuitino, A.M., 2002, "Full-Field Measurements of Heterogeneous Deformation Patterns on Polymeric Foams Using Digital Image Correlation," International Journal of Solids and Structures, 2002, Vol. 39, No. 13, pp. 3777-3796 https://doi.org/10.1016/S0020-7683(02)00176-2
- ARAMIS System. ARAMIS User Manual-Software. Braunschweig, Germany : GOM GmbH, 2013.
- Hosford, W. F. Jr., Fleischer, R. L., Backofen, W. A., 1960, "Tensile Deformation of Aluminum Single Crystal at Low Tempratures," Acta Metallurgica, Vol. 8, pp. 187-189. https://doi.org/10.1016/0001-6160(60)90127-9
- Kocks. U. F., Mecking. H., 2003, "Physics and Phenomenology of Strain Hardening : the FCC Case," Progress in Materials Science, Vol.48, pp. 171-273. https://doi.org/10.1016/S0079-6425(02)00003-8