High-Strain Rate Tensile Behavior of Pure Aluminum Single and Multi-Crystalline Materials with a Tensile Split Hopkinson Bar |
Ha, Sangyul
(Dept. Corporate R&D Institute, Samsung Electro-Mechanics)
Jang, Jin Hee (Dept. of Mechanical Engineering, Pohang University of Science and Technology) Yoon, Hyo Jun (Dept. of Mechanical Engineering, Pohang University of Science and Technology) Kim, KiTae (Dept. of Mechanical Engineering, Pohang University of Science and Technology) |
1 | Kolsky, H., 1949, "An Investigation of the Mechanical Properties of Materials at very High Rates of Loading," Proc. Phys. Soc., B 62, 676 DOI |
2 | Hopkinson, B., 1914, "A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets," Philos. Trans. R. Soc. Lond. Ser. A 213, 437-456. DOI |
3 | Nicholas, T., 1981, "Tensile Testing of Materials at High Rates of Strain," Exp. Mech. pp. 177-185. |
4 | Jung, D.-T., 1994, "Split Hopkinson Pressure Bar Technique for Stress-Strain Measurement," The Korean Society of Mechanical Engineers Annuals Spring & Fall Conferences, pp. 33-34. |
5 | Kang, W.-J., Cho, S.-S., H, H., Jung, D.-T., 1997, "High Strain Rate Tensile Test of Sheet Metals with a New Tension Split Hopkinsn Bar," Trans. Korean Soc. Mech. Eng. A, Vol. 21, No. 12, pp. 2209-2219. DOI |
6 | Pang, J.H.L, 2012. Lead Free Solder: Mechanics and Reliability, Springer. |
7 | Nemat-Nasser, S., Isaacs, J.B., Starrett, J.E., 1991, "Hopkinson Techniques for Dynamic Recovery Experiments," Proc. R. Soc. Lond., Vol. 435, pp. 371-391. DOI |
8 | Rittel, D., Lee, S., Ravichandran, G., 2002, "Large Strain Constitutive Behavior of OFHC Copper over a Wide Range of Strain-Rates Using the Shear Compression Specimen," Mechanics of Materials, Vol. 34, pp. 627-642. DOI |
9 | Kim, Y., Shin, S.Y., Kim, Y.G., Kim, N.J., Lee, S., 2010, "Effects of Strain Rate and Test Temperature on Torsional Deformation Behavior of API X70 and X80 Linepipe Steels," Metall. Mater. Trans., Vol. 41A, pp. 1961-1972. |
10 | Lindholm, U.S. and Yeakley, L.M., 1968, "High Strain-Rate Testing: Tension and Compression," Exp. Mech., Vol. 8, pp. 1-9. DOI |
11 | Khan, A.S., Liu, J., Yoon, J.-W., Nambori, R., 2015, "Strain Rate Effect of High Purity Aluminum Single Crystals: Experiments and Simulations," International Journal of Plasticity, Vol. 67, pp. 39-52 DOI |
12 | Badulescu. C., Grédiac. M., Haddadi. H., Mathias. J. -D., Balandraud. X., Tran. H. -S., 2011, "Applying the Grid Method and Infrared Thermography to Investigate Plastic Deformation in Aluminium Multicrystal," Mechanics of Materials, Vol.43, pp. 36-53 DOI |
13 | Wang, Y. and Cuitino, A.M., 2002, "Full-Field Measurements of Heterogeneous Deformation Patterns on Polymeric Foams Using Digital Image Correlation," International Journal of Solids and Structures, 2002, Vol. 39, No. 13, pp. 3777-3796 DOI |
14 | ARAMIS System. ARAMIS User Manual-Software. Braunschweig, Germany : GOM GmbH, 2013. |
15 | Hosford, W. F. Jr., Fleischer, R. L., Backofen, W. A., 1960, "Tensile Deformation of Aluminum Single Crystal at Low Tempratures," Acta Metallurgica, Vol. 8, pp. 187-189. DOI |
16 | Kocks. U. F., Mecking. H., 2003, "Physics and Phenomenology of Strain Hardening : the FCC Case," Progress in Materials Science, Vol.48, pp. 171-273. DOI |