• 한국지반공학회논문집
• /
• 제37권4호
• /
• pp.27-37
• /
• 2021

개별진공압밀공법을 적용한 연약점토 지반의 압밀거동을 분석하기 위하여 Plaxis 2D를 이용하여 유한요소해석을 수행하였다. 진공압을 묘사하기 위한 세부적인 방법을 unit-cell 해석 결과와 함께 제시하고, 실제 시공사례를 모델링하여 수치해석결과와 현장계측결과를 비교해봄으로써 개별진공압밀공법이 적용된 연약지반의 압밀거동을 예측하기 위한 Plaxis 2D의 사용 가능성 검토와 해석기법을 제시한다.

• Geomechanics and Engineering
• /
• 제6권4호
• /
• pp.377-389
• /
• 2014

The vacuum consolidation method which was proposed by Kjellman in 1952 has been studied extensively and used successfully since early 1980 throughout the world, especially in East and Southeast Asia. Despite the increased successful use, different opinions still exist, especially in connection to distribution of vacuum with depth and time in vertical drains and in soil during preloading of soft ground. Porewater pressure measurements from actual cases of field vacuum and vacuum-fill preloading as well as laboratory studies have been examined. It is concluded that (a) a vacuum magnitude equal to that in the drainage blanket remains constant with depth and time within the vertical drains, (b) as expected, vacuum does not develop at the same rate within the soil at different depths; however, under ideal conditions vacuum is expected to become constant with depth in soil after the end of primary consolidation, and (c) there exists a possibility of internal leakage in vacuum intensity at some sublayers of a soft clay and silt deposit. A case history of vacuum loading with sufficient subsurface information is analyzed using the ILLICON procedure.

• 진공이야기
• /
• 제1권1호
• /
• pp.17-20
• /
• 2014

This article introduces the basic concepts of various soft X-ray spectroscopies in the study of surface and interface electronic structures. Especially, recent results of X-ray photoelectron spectroscopy experiments on organic/inorganic thin films and a lead-free solder alloys will be discussed. Soft X-ray spectroscopies to understand the chemical and electrical properties would be of broad interest in the vacuum science communities.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.467-472
• /
• 2010

Individual vacuum pressure method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or pre-loading method. In this study, given the inner displacement of the ground where the individual vacuum pressure is applied, this dissertation aimed to reproduce the state of stress in the ground that is subject to the constraints created by the depth of improvement area. Modified Cam Clay theory which made it possible to take into account the isotropic displacement of the ground was applied to the NAP-IVP used simulation; the conception of equivalent permeability proposed by Hird was also applied so that the 3-dimensional real construction effect of drain materials could be reflected in the analysis.

• 한국지반공학회논문집
• /
• 제29권3호
• /
• pp.15-27
• /
• 2013

기존 성토재하 방식의 연약지반 개량공법에서 제기된 여러 가지 문제에 의해 진공압 재하방식의 개량공법이 개발되었으며, 국내 적용사례가 증가하고 있다. 현장에서의 침하관리시 동일한 하중을 재하하였을 경우의 진공압재하공법과 성토재하공법에 대한 침하량 비교 연구가 진행되어 왔다. 본 연구에서는 두 공법의 발생침하량에 관한 이론 및 사례 연구를 수행하였다. 그 결과 연약지반 개량을 위해 진공압이 적용되면 내향의 수평변위가 발생하고 동일한 하중재하 대비 침하량이 감소하였다. Hooke의 탄성이론을 바탕으로 한 경우 0.54~0.67, 국내 설계기준에서는 0.50~0.75, 과거 국내 시공사례를 바탕으로 한 경우 0.91, 실내시험을 바탕으로 한 경우 0.81, 탄성론과 체적압축계수법을 바탕으로 한 경우 0.75, 최근 국내 대심도 시공 사례의 경우 0.77~0.93의 범위를 보이는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제1권3호
• /
• pp.179-191
• /
• 2009

For a two-way drainage deposit under a surcharge load, it is possible to leave a layer adjacent to the bottom drainage boundary without prefabricated vertical drain (PVD) improvement and achieve approximately the same degree of consolidation as a fully penetrated case. This depth is designated as an optimum PVD installation depth. Further, for a two-way drainage deposit under vacuum pressure, if the PVDs are fully penetrated through the deposit, the vacuum pressure will leak through the bottom drainage boundary. In this case, the PVDs have to be partially penetrated, and there is an optimum installation depth. The equations for calculating these optimum installation depths are presented, and the usefulness of the equations is studied by using finite element analysis as well as laboratory model test results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제28회 학술발표회 초록집
• /
• pp.79-79
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제11회 학술발표회 논문개요집
• /
• pp.107-107
• /
• 1996

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.146-146
• /
• 2008

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제27회 학술발표회 초록집
• /
• pp.62-62
• /
• 2004