참고문헌
- Heckele, M. and Schomburg, W. K., "Review on Micro Molding of Thermoplastic Polymers," Journal of Micromechanics and Microengineering, Vol. 14, No. 3, pp. R1-R14, 2004. https://doi.org/10.1088/0960-1317/14/3/R01
- Giboz, J., Copponnex, T. and Mele, P., "Microinjection Molding of Thermoplastic Polymers: A Review," Journal of Micromechanics and Microengineering, Vol. 17, No. 6, pp. R96-R109, 2007. https://doi.org/10.1088/0960-1317/17/6/R02
- Heckele, M., Bacher, W. and Muller, K. D., "Hot Embossing - The Molding Technique for Plastic Microstructures," Microsystem Technologies, Vol. 4, No. 3, pp. 122-124, 1998. https://doi.org/10.1007/s005420050112
- Truckenmuller, R., Rummler, Z., Schaller, Th. and Schomburg, W. K., "Low-cost Thermoforming of Micro Fluidic Analysis Chips," Journal of Micromechanics and Microengineering, Vol. 12, No. 4, pp. 375-379, 2002. https://doi.org/10.1088/0960-1317/12/4/304
- Lim, H. J., Lee, J. J., Choi, K. B., Kim, G. H., and Lee, S. H., "Technology for Roll-based Nanoimprint Lithography Systems," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 1-8, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.001
- Lee, H. J. and Park, K., "Development of Composite Micro-patterns on Polymer Film Using Repetitive Ultrasonic Imprinting," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 4, pp. 341-345, 2014. https://doi.org/10.1007/s40684-014-0043-y
- Lee, J. R., Jeon, E. C., Je, T. J., Woo, S. W., Choi, D. S., Yoo, Y. E. and Kim, H., "Fabrication and Analysis of Optical Micro-pyramid Array-patterns," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 7-12, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.007
- Becker, E. W., Ehrfeld, W., Hagmann, P., Manner, A. and Munchmeyer, D., "Fabrication of Microstructures with High Aspect Ratios and Great Structural Heights by Synchrotron Radiation Lithography, Galvanoformung, and Plastic Moulding(LIGA Process)," Microelectronic Engineering, Vol. 4, No. 1, pp. 35-56, 1986. https://doi.org/10.1016/0167-9317(86)90004-3
- Lee, B. K., Kim, D. S. and Kwon, T. H., "Replication of Microlens Arrays by Injection Molding," Microsystem Technologies, Vol. 10, No. 6-7, pp. 531-535, 2004. https://doi.org/10.1007/s00542-004-0387-2
- Lee, B. K., "Microinjection Molding of Plastic Microfluidic Chips Including Circular Microchannels," Polymer Engineering and Science, Vol. 54, No. 1, pp. 42-50, 2014. https://doi.org/10.1002/pen.23535
- Lee, B. K. and Kwon, T. H., "Replication of Multi-level Microstructures by Microinjection Molding Using Modularized and Sectioned Micromold System," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 7, pp. 859-866, 2010. https://doi.org/10.3795/KSME-A.2010.34.7.859
피인용 문헌
- Development of a Process Technique for Heavy Metal Removal in the Production of Recycled Synthetic Resin Materials vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.137
- Fabrication of micro piezoelectric rod array using metallic mold system for mass production vol.101, pp.9, 2015, https://doi.org/10.1007/s00170-018-2986-6