DOI QR코드

DOI QR Code

투수성이 높은 화산쇄설층에서 부력앵커 시공을 위한 단일공 차수공법 (C-RJP Grouting)의 적용성에 관한 연구

A Applicability Study on Single Grouted Column Method (C-RJP Grouting) for Buoyancy-Resistant Permanent Anchor in Highly Permeable Volcanic Clastic Zones

  • 투고 : 2015.03.16
  • 심사 : 2015.07.06
  • 발행 : 2015.08.01

초록

연구대상은 건축물에 지하부의 이용 극대화 목적으로 지하부의 부력에 대한 부력 저항용 앵커를 고려하였다. 그러나 투수계수가 크고 지하수 유속이 빠른 화산쇄설층에서 앵커 천공부를 통해 지하수가 급격히 유출되어 앵커체 삽입이 불가능하였다. 또한 억지로 삽입된 앵커공에서는 계속적으로 많은 양의 해수와 시멘트가 유출되었으며, 앵커의 일부는 지반에 정착이 되지 않는 현상이 발견되었다. 이러한 문제를 해결하기 위한 지하수 차단방법으로 초고압 분사교반 공법을 적용하였고, 그중 단일공 차수방법을 채택하여 부력방지앵커를 설치하였다. 본 연구에서는 초고압 분사교반 공법을 이용한 단일공 차수방법을 현장에 적용하고 3회에 걸친 시험시공을 통해 본 시공 시험에 적용할 주입재를 결정하였고 투수시험, 코어채취 표준관입시험 일축압축강도시험을 통하여 차수효과 및 지반개량 정도를 확인하였다. 또한 부력방지앵커의 설치 및 인장시험을 통해 앵커의 안정성을 확보하여 화산쇄설층에서 단일 차수공법의 적용성을 검증하였다.

In this study, buoyancy-resistance permanent anchor was considered to prevent uplift pressure of a building structure. However, this test was failed to put anchor body in the boring hole because of the rapid outflow of ground water and coefficient of permeability. In addition, the hole where the anchor body was forcefully inserted constantly flew the sea water and cement. And it was found that anchor was not settled in the ground. In order to solve this problem, jet grouting method was applied to block the ground water and the single grouted column method was chosen to install the buoyancy-resistance permanent anchor. In this paper, the single grouted column method was applied with the general jet grouting methods and grout material was fixed by 3-field tests. These tests confirmed the effect of permeability and ground improvement with field permeability test by core sampling, Standard Penetration Test (SPT) and unconfined compression test. Confirming the stability of the buoyancy-resistance permanent anchor with installation and tension test, application of the single grouted column method in the volcanic clastic zones was verified.

키워드

참고문헌

  1. Chun, B. S. (2012), Geotechnical engineering theory and practice, pp. 707-729 (in Korean).
  2. Chun, B. S. (2011), Principles and practice for chemical grouting, pp. 173-180 (in Korean).
  3. Han-yang University construction technology institute & Chung-Ah Engineering Consultants Co., Ltd. (1998), Research report on feasibility study of C-RJP grouting method and buoyancy resistance anchor method and relevant strategies, pp. 3-180 (in Korean).
  4. Inworld Construction Co., Ltd. (1998), Jeju hotel construction confirmation drilling research report, pp. 3-13 (in Korean).
  5. Korean Industrial Standards (1995), PC steel wire and PC steel strands, pp. 3-5 (in Korean).
  6. Pumyang Construction Co., Ltd. (1998), Jeju hotel construction site C-RJP test construction report, pp. 3-80 (in Korean).