Journal of Advanced Marine Engineering and Technology

  • 제39권4호
  • /
  • Pages.443-448
  • /
  • 2015
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

선박용 SCR 시스템에서 스월형 혼합기의 날개 각도가 유동혼합 및 압력강하에 미치는 영향

Effect of Vane Angle of Swirl Type Mixer on Flow Mixing and Pressure Drop in Marine Selective Catalytic Reduction Systems

  • Park, Taewha (Graduate School of Mechanical Engineering, Pusan National University) ;
  • Sung, Yonmo (Graduate School of Mechanical Engineering, Pusan National University) ;
  • Kim, Taekyoung (Energy Components R&D Department, LG Electronics Inc.) ;
  • Choi, Cheolyong (Graduate School of Mechanical Engineering, Pusan National University) ;
  • Kim, Duckjool (School of Mechanical Engineering, Pusan National University) ;
  • Choi, Gyungmin (School of Mechanical Engineering, Pusan National University)
  • 투고 : 2014.09.01
  • 심사 : 2015.04.10
  • 발행 : 2015.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

선박용 질소산화물 저감장치의 혼합영역에서 유동혼합 성능을 개선하기 위해 스월형 혼합기가 개발되었다. 본 연구에서는 스월형 혼합기와 각단의 날개 각도가 조절 가능한 다단 스월형 혼합기가 고려되었다. 두 스월형 혼합기의 최적 날개 각도를 도출하기 위해 날개 각도가 균일지수 및 압력강하에 미치는 영향을 수치해석 기법을 이용하여 조사하였다. 스월형 혼합기에서는 혼합기의 날개 각도를 $10^{\circ}$ 에서 $80^{\circ}$ 까지 변화시킬 때, 최적의 유동혼합 성능은 베인 각도 $30^{\circ}$에서 $60^{\circ}$ 범위에서 나타났으나, 압력강하는 베인 각도 증가에 따라 선형적으로 증가하였다. 반면 다단 스월형 혼합기에서는 각 단의 날개각도를 조절함으로써 압력강하를 낮추면서도 높은 혼합성능의 유지가 가능함을 보였다.

A swirl type mixer was developed to improve the flow mixing performance of a marine selective catalytic reduction system. In this study, the swirl type mixer and a multi-staged swirl type mixer, in which the angle of the vanes at each stage is controllable were considered to provide the optimal region of angles for the mixers. The effects of the vane angles in both mixers on the uniformity index and pressure drop were investigated using a computational fluid dynamics simulation. In the swirl type mixer, the optimal conditions for the flow mixing performance were observed at vane angles from 30 to 60 degrees when vane angles could be adjusted between 10 to 80 degrees, however, the pressure drop increased continually with increasing vane angle of the mixer. On the other hand, control of the individual staged angles of the multi-staged mixer showed that it is possible to keep enhancing flow mixing performance while reducing the pressure drop.

키워드

참고문헌

  1. E. K. Lee, "Impacts and measures of SOx and NOx emission standards on shipping," Shipping and Management, vol. 22, pp. 22-38, 2011 (in Korean).
  2. Revised MARPOL Annex VI, Regulations for the Prevention of Air Pollution from Ships and $NO_x$ Technical Code 2008, International Maritime Organization, London, UK, 2009.
  3. K. J. Kang, S. H. Kim, and E. C. Kim, "A study on the $NO_x$ emission status and reduction technologies of domestic marine engine," Journal of the Korean Society for Marine Environmental Engineering, vol. 7, no. 2, pp. 57-63, 2004 (in Korean).
  4. S. Kim and M. Kim, "The need to develop nitrogen oxides($NO_x$) reduction equipment and regulation in marine," Proceedings of the 44th KOSCO SYMPOSIUM Spring Conference, pp. 69-74, 2012 (in Korean).
  5. S. M. Palash, H. H. Masjuki, M. A. Kalam, B. M. Masum, A. Sanjid, and M. J. Abedin, "State of the art of $NO_x$ mitigation technologies and their effect on the performance and emission characteristics of biodiesel- fueled compression ignition engine," Energy Conversion and Management, vol. 76, pp. 400-420, 2013. https://doi.org/10.1016/j.enconman.2013.07.059
  6. D. F. Woodyard, Pounder's Marine Diesel Engines and Gas Turbines, 9th ed., Amsterdam; Londen: Elsevier/Butterworth-Heinemann, 2009.
  7. H. Ha, $DeNO_x$ Performance of Zeolite-type Supported Catalysts for Marine $NH_3$-SCR Applications, M.S. Dissertation, Department of Chemical Engineering, Changwon National University, Korea, 2011 (in Korean).
  8. T. Kim, Y. Sung, S. Han, S. Ha, G. Choi, and D. Kim, "Effect of mixer structure on turbulence and mixing with urea-water solution in marine SCR system," Journal of the Korean Society for Marine Engineering, vol. 36, no. 6, pp. 814-822, 2012 (in Korean). https://doi.org/10.5916/jkosme.2012.36.6.814
  9. T. Park, Y. Sung, T. Kim, I. Lee, G. Choi, and D. Kim, "Effect of static mixer geometry on flow mixing and pressure drop in marine SCR applications," International Journal of Naval Architecture and Ocean Engineering, vol. 6, no. 1, pp. 27-38, 2014. https://doi.org/10.2478/IJNAOE-2013-0161
  10. C. Choi, Y. Sung, G. M. Choi, and D. J. Kim, "Numerical analysis of urea decomposition with static mixers in marine SCR system," Journal of Clean Energy Technologies, vol. 3, no. 1, pp. 39-42, 2015. https://doi.org/10.7763/JOCET.2015.V3.165
  11. G. M. Choi, T. K. Kim, Y. M. Sung, and D. J. Kim, "Mixer for fluid mixing in the pipe," Korea, Patent 10-1340889, December 6, 2013 (in Korean).
  12. Fluent, Fluent 6.3 User's Guide, Lebanon: ANSYS Inc., 2007.
  13. H. Weltens, H. Bressler, F. Terres, H. Neumaier, and D. Rammoser, "Optimization of catalytic converter gas flow distribution by CFD prediction," SAE Technical Paper, 930780, 1993.