Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Developing Simulation Model for Estimating the Productivity of Gang-Form Operation

갱폼 공정 품셈산출을 위한 시뮬레이션 모델 개발

  • 이동은 (경북대학교 건축.토목공학부) ;
  • 신원상 (세명대학교 대학원 건설공학과) ;
  • 손창백 (세명대학교 건축공학과)
  • Received : 2014.03.28
  • Accepted : 2014.05.15
  • Published : 2014.06.30
⟨ Previous Next ⟩

Abstract

In this study, to resolve several problems in actual inspection stage from the sites for establishment or revision of Construction Standard Production Unit-CSPU such as difficulty of casting objects for inspection from sites, lack of inspectors, etc, we developed Production Unit Module to apply for accessorial work or unproductive work which are occurred in construction process, from Gang-Form which is widely used in formwork for outer wall and we developed Cyclone model for Gang-Form Operation which is having Gang-Form. Also, we verified the application in actual work of Production Unit Module or cyclone Model which are developed in this study by comparing and analysing outfit Production unit through Cyclone Model of Gang-Form Operation and Work Sampling method in actual sites. From the result of comparing or analysing upon outfit Production Unit from Work Sampling and Cyclone Model, we found that both have approximate value within ${\pm}5%$ so we can prove the actual application of developed Cyclone Model of Gang-Form Operation.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. 건설관리학, 사이텍미디어, p.p. 224-225, 2006.8
  2. 강동완, 지성민, 현창택, 거푸집 공사의 생산성 분석을 통한 작업조 기반의 Cost Data Prototype 개발에 관한 연구, 한국건설관리학회 논문집, 13권 1호, p.p. 44-52, 2012.1 https://doi.org/10.6106/KJCEM.2012.13.1.044
  3. 곽한성, 손창백, 이동은, 공구분할을 위한 시뮬레이션 조닝모듈 개발, 대한건축학회 논문집, 28권 10호, p.p. 131-140, 2012.10
  4. 손창백, 김용우, 이동은, 가스압접공정 품셈산출을 위한 시뮬레이션 모형 개발, 대한건축학회 논문집 구조계, 29권 4호, p.p.109-116, 2013.4
  5. 송창엽, 이환철, 박소현, 조규만, 현창택, 알루미늄 폼을 이용한 골조공사의 생산성 분석에 관한 연구, 대한건축학회 논문집 구조계, 26권 4호, p.p. 113-121, 2010.4
  6. 이동은, 김용우, 손창백, 웹싸이클론을 활용한 알루미늄 폼 공정의 품셈산출, 한국건설관리학회 논문집, 14권 3호, p.p. 115-122, 2013.5 https://doi.org/10.6106/kJCEM.2013.14.3.115
  7. 이정호, 양상훈, 김영석, 공동주택 전용 갱폼 인양 자동화 기술의 개발 - 구조적 안정성 및 타워크레인 양중부하 분석 -, 한국건설관리학회 논문집, 13권 4호, p.p. 48-59, 2012.7 https://doi.org/10.6106/KJCEM.2012.13.4.048
  8. 임태경, 손창백, 이동은, 요소작업 기반 티어공법 철골조립 시뮬레이션 모델, 대한건축학회 논문집 구조계, 27권 10호, p.p.177-188, 2011.10
  9. Huang and Halpin, Simulation of Cable-Stated Bridges Using Disco, Proceedings of the 26th conference on Winter simulation, p.p. 1130-1136, 1994
  10. Rong-yau Huang, Jeam-Jei Chen, Kuo-Shun Sun, Planning gang form work operations for building construction using simulation, Automation in Construction, Vol.13 No.6, p.p. 765-779, 2004 https://doi.org/10.1016/j.autcon.2004.05.001