• The Journal of Fisheries Business Administration
• /
• v.52 no.3
• /
• pp.27-38
• /
• 2021

This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.225-236
• /
• 2014

Productivity of public organizations was far older due to issue more difficult to measure than private organizations. Unlike the private sector, the public sector is a diverse and sometimes conflicting objectives (efficiency, effectiveness, equity, democracy, etc.) exist, it is difficult to measure productivity in a single index. Many departments of government is intricately interrelated and sometimes produced by the joint efforts, it is difficult to allocate performance, incentives and accountability to among departments. And there is the difficulty of collecting data on the productivity indicators of public organizations. Despite these difficulties, we developed a productivity index system and measuring method to systematically introduce the concept of productivity in the local administration. In this paper, the productivity and the productivity index measurement practices of local governments conducted annually from 2011 on was deep into research. First, the report found examples of the governments of the developed countries, productivity measurement, then the way MOPAS(Ministry of Public Administration and Security) measure productivity index of local governments, success factors, the implications were in-depth analysis. Finally, in order to enhance productivity and competitiveness municipalities studied ways to take advantage of the productivity index.

• Journal of Korea Trade
• /
• v.25 no.3
• /
• pp.48-64
• /
• 2021

Purpose - This study examined the effect of tariff cuts on productivity in Korea's manufacturing industries and the effect of initial productivity level before tariff cuts on productivity improvement after tariff cuts. We also attempted to identify whether import-driven or export-driven factors are more important for productivity improvement, especially in low productivity industries. Design/methodology - Since tariff reduction is a policy decision that can affect cross-industry, its impact is spread across all industries beyond the scope of a single firm through the input and output network of industry structure. Accordingly, we proposed a new method to measure the change in productivity to reflect the impact of tariff cuts across industries. Through an Armington CGE analysis, changes in endogenous variables can be directly measured after the exogenous shock of tariff reduction, and the amount of movements in productivity triggered by tariff cuts can also be calculated. We can thus assess the effectiveness of exogenous policy, such as tariff cuts, through the difference between the benchmark and counterfactual values of endogenous variables. Findings - This study confirmed that tariff reduction positively affected productivity improvement in Korea's manufacturing industries. It also confirmed that productivity gains occur in Korea's leading export industries. Finally, greater productivity gains were recorded in the group with additional high-export-share or high-import-share conditions for low productivity industries. These results are, in a limited sense, consistent with the existing studies that emphasize the importance of exports and imports on productivity improvement, especially for low productivity industries. Originality/value - The results of our experiments are different from those of non-CGE studies, which measure the industry-level change in productivity with dummy coefficients, in terms of directly calculating the amount of change in productivity. In addition, we propose that the Armington CGE model is more appropriate than the Melitz CGE model to directly measure the productivity after tariff cuts. This is because the Melitz CGE model assumes the given specific productivity density, which does not change after an overall drop of tariffs. To the best of our knowledge, this approach to directly calculating productivity by reflecting the impact of tariff reduction across industries through CGE analysis, is unprecedented in this literature.

• Korea Journal of Hospital Management
• /
• v.22 no.3
• /
• pp.46-60
• /
• 2017

The purpose of this study is to analyze the difference of productivity according to environmental factors among 25 Regional base public hospitals. Also this study is to propose a method to improve the productivity of Regional base public hospitals in the future by improving the public performance and stable management performance by studying the productivity variables affecting profitability. The survey period was based on the last three years, and 25 Regional base public hospitals were selected for the survey. The dependent variable is the total capital medical marginal profitability and the medical profit marginal profitability which are the indicators of profitability. The independent variable, productivity, is classified into three indicators: capital productivity, labor productivity, and value added productivity. The ANOVA analysis method was used to analyze the productivity difference according to the frequency factor and the environmental factors of the Regional base public hospitals. Finally, we conducted a hierarchical regression analysis to examine the productivity variables affecting profitability. The results of this study showed that there were differences in productivity due to environmental factors such as hospital size, competition in the local medical market, and differences in management performance. The difference in productivity and profitability depending on the environmental factors suggests that it is difficult for Regional base public hospitals in each regional base to perform a balanced public service. In order to overcome this, it is necessary to provide balanced medical services such as government financial support expansion, regional medical demand forecasting and facility infrastructure construction.

• Asia pacific journal of information systems
• /
• v.26 no.4
• /
• pp.542-560
• /
• 2016

This study determines whether or not firms can achieve high productivity growth through external technology acquisition. It also identifies the key factors affecting adopting firms' productivity growth by employing the Malmquist productivity index (MPI) methodology, which features computational ease, low data dependency, and decomposition of productivity growth into technical efficiency change and technical change. Results showed that the effects of productivity growth arising from technology transfer became stronger over time. Moreover, patent transfer guaranteed firms' productivity growth, but no evidence was found that factors such as age and size could increase productivity. Finally, cultural similarity could be another factor conditioning the effectiveness of technology transfer in the productivity of adopting firms.

• Korea Trade Review
• /
• v.46 no.3
• /
• pp.25-44
• /
• 2021

This paper analyzes the impact of the recent change in global value chain on the productivity of manufacturing sectors and firms in Chungnam area using ADB MRIO. Forward participation significantly increases sector productivity in Chungnam area and backward participation affects the sector productivity after 2015. In the analysis for firm productivity in Chungnam area, GVC participation does not enhance the productivity of firms in Chungnam area. However, firms in the top 25% of productivity in 2007 improved their productivity with higher GVC participation and the productivity of firms in the top 25% of asset in 2007 was positively affected by forward pariticipation and negatively affected by backward participation. The productivity of firms that were in international market in 2007 was significantly worsened by GVC participation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.422-426
• /
• 2006

Productivity is one of the very important index that measures efficiency of production activities in industry, enterprises and the building industry as well. None the less, the concept of construction productivity is not so clear that productivity management in the building industry have been performed by experience or intuition, productivity related data have not been analyzed through effective productivity management, because structured definition and classification of factors influencing construction productivity did not exist so that it has not been known what information explain each of them. In order to solve this problem, at first construction productivity and factors influencing construction productivity are defined and classified into three groups; (1)Project factors influencing construction productivity (2)Management factors influencing construction productivity (3)Activity factors influencing construction productivity. To find out relation between construction productivity and factors influencing construction productivity, a questionnaire survey for construction managers in the building industry has been conducted.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.197-200
• /
• 1997

Each company is more interested in the productivity to achieve cost reduction and profit maximization through productivity improvement. With this trend, we show the method to measure productivity using TPM(Total Productivity Model) which considers all the input factors of the company instead of using partial productivity such as labor and/or capital productivity We also examine the relation of productivity versus output, profit versus output and profit versus productivity of the case company by actually applying the TPM and suggest the optimal level of profit and output for this company.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.632-639
• /
• 2022

The objective of this study is to analyze the productivity, efficiency, and factors affecting the productivity of a spray task from an international airport project. The study is focused on the productivity analysis of the Subcontractor whose job was to supply and apply sprayed-applied fire-resistive material (SFRM) on steel members to achieve the necessary fire ratings on the building structures of the Hamad International Airport, Qatar. The study analyzed the productivity of the four sprayer teams who completed the task at three locations and three areas of the airport. The study found that the productivity of the individual team observed during the SFRM spray task was not only different but was also observed different when they worked at varying floor heights where different factors affecting productivity were predominant. The study found that the efficiency was lowest (47.32%) when the spray team had to work at second-floor heights and factors affecting productivity such as limited accessibility for material movement and lifting, site congestion, lack of continuity of operation due to priority areas and frequent re-handling of machines and tools were present. Besides, the factors such as adverse weather conditions and sub-trades interference affected productivity at all locations. The findings show that productivity depends on multiple factors and those factors need to be identified and addressed to improve productivity. The findings also show that the estimated efficiency was hard to achieve but possible since Team 4 had 97% efficiency on the first floor of the airport.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.58-65
• /
• 2011

Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.