DOI QR코드

DOI QR Code

High Performance of Self Scheduled Linear Parameter Varying Control with Flux Observer of Induction Motor

  • Khamari, Dalila (Dept. of Electrical Engineering, Batna University) ;
  • Makouf, Abdesslam (Dept. of Electrical Engineering, Batna University) ;
  • Drid, Said (Dept. of Electrical Engineering, Batna University) ;
  • Chrifi-Alaoui, Larbi (Laboratoire des technologies innovantes (L.T.I), Universite de Picardie Jules Verne)
  • Received : 2012.10.26
  • Accepted : 2013.03.14
  • Published : 2013.09.01

Abstract

This paper deals with a robust controller for an induction motor (IM) which is represented as a linear parameter varying systems. To do so linear matrix inequality (LMI) based approach and robust Lyapunov feedback are associated. This approach is related to the fact that the synthesis of a linear parameter varying (LPV) feedback controller for the inner loop take into account rotor resistance and mechanical speed as varying parameter. An LPV flux observer is also synthesized to estimate rotor flux providing reference to cited above regulator. The induction motor is described as a polytopic LPV system because of speed and rotor resistance affine dependence. Their values can be estimated on line during systems operations. The simulation and experimental results largely confirm the effectiveness of the proposed control.

Keywords

References

  1. C. Attainase, and C. Tomasso "Hinfinity control of induction motor drives" IEE proc. Eletr. Power Appl., 2001, 148, pp. 272-278. https://doi.org/10.1049/ip-epa:20010329
  2. C. P Bottura, M.F.S.Neto., S.A.A: "Robust speed control of an induction motor: an $H_{\infty}$ control theory approach with field orientation and $\mu$-analysis", IEEE Trans, Power Electron, 2000, 15, pp. 908-915. https://doi.org/10.1109/63.867680
  3. A. Makouf., M. E. H. Benbouzid., D.Diallo., N. E. Bouguecha l "Induction motor robust control: an Hinfinity control approach with field orientation and input-output linearising". Proc. 27th Annual Conf. IEEE Industrial Electronics Society, Denver, USA, 1.
  4. J.C.Basilio J.A Silva Jr L.G.B Rolim M.V. Moreira "$H_{\infty}$ design of rotor flux oriented current-controlled induction motor drives: speed control, noise attenuation and stability robustness" IET Control Theory App., 2010, Vol. 4, Iss.11, pp. 2491-2505. https://doi.org/10.1049/iet-cta.2009.0377
  5. D. I. Kim, I. J. Ha, and M. S. Ko, "Control of induction motors via feedback linearization with input-output decoupling," Int. J. Control, Vol. 51, pp. 863-883, 1990. https://doi.org/10.1080/00207179008934102
  6. P Apkarian, P. Gahinet, "A Convex Caracterization of gain scheduled $H_{\infty}$ controllers", IEEE. Trans. on Automatic Control, 40(1995), pp. 853-863. https://doi.org/10.1109/9.384219
  7. P. Apkarian, P. Gahinet, G. Becker, "Self scheduled $H_{\infty}$ Control of Linear Parameter varying systems: a Design Exemple", Automatica, Vol. 31-9, 1995, pp. 1251-1261.
  8. H. Khalil, "Nonlinear systems", (Prentice-Hall, Englewood Cliffs, NJ, 1996, 2nd edn).
  9. B. Lu, H. Choi, D. Gregory and K. Tammi "Linear parameter-varying technique for control of a magnetic bearing system" Control Eengineering Practice 16 (2009) pp. 1161-1172.
  10. B. Paijmans, W. Symens, H. Van Brussel and J. Swevers, A gain-scheduling-control technique for mechatronic systems with position-dependent dynamics, American Control Conference 2006.
  11. C. Wang "Control, Stability analysis and Grid integration of Wind Turbines" Doctor of Philosophy thesis March 2008.
  12. D. Khamari, A. Makouf, S. Drid "Control of Induction Motor using Polytopic LPV Models" IEEE International conference on communication, computing and control application(CCCA''11) March 3-5,2011 Hammamet, Tunisia.
  13. D. Fodor and R. Toh "Speed Sensorless Linear Parameter Variant $H_{\infty}$ Control of the Induction motor" 43rd IEEE Conference on decision and Control December 14-17, 2004 Atlantis.
  14. M. Hilairet C. Darengosse F. Auger and P. Chevrel: "Synthesis and Analysis of Robust Flux Observers for Induction Machines," Bd. De l'Universite, France: 200.
  15. E. Premapain I. Pstletwaite and A. Benchaib: "A Linear Parameter Variant $H_{\infty}$ Control Design for an Induction Motor", Control Engineering Practice, No. 10, 2002, pp. 663-644.
  16. S. drid, M. Tadjine and M.-S. Nait-Said "Robust Backstepping Vector control for the doubly feed induction motor" IET control Theory App, 2007 1, 4, pp. 861-868. https://doi.org/10.1049/iet-cta:20060053
  17. V. Uray "Electrotechnics, in Hungarian", Muszaki konyvkiado, budapest:1970, pp. 82-84.
  18. K. Wang J. Chaison M. Bodson "An on line rotor time constant estimator for the induction motor" IEEE Trans. Control Syst. Technol., 2007, 15, pp. 330-348.
  19. A. Chelouah, "Comparaison des strategies de commandes nonlineaire appliquees a un moteur asynchrone modelises dans les referentiels (d, q) et ($\alpha$, $\beta$) aspect echantillonnees et robustesse," Master thesis, Laboratoire des signaux et des systemes (LSS), CNRSESE 1991.
  20. S. Drid, M. Tadjine and M.S. Nait-Said, "Robust Backstepping Vector control for the Doubly Fed Induction Motor," IET Control Theory Appl., 2007, 1, (4), pp. 861-868. https://doi.org/10.1049/iet-cta:20060053
  21. D. C. McFarlane and K. Glover, "A loop shaping design procedure using $H_{\infty}$ synthesis", IEEE Transaction on control 37(6), 759-769, 1992. https://doi.org/10.1109/9.256330
  22. E. Prempain and I. Postlethwaite, "$L_2$ and $H_2$ performance analysis and gain-scheduling synthesis for parameter-dependent systems", Automatica 44 (2008) pp. 2081-2089. https://doi.org/10.1016/j.automatica.2007.12.008

Cited by

  1. Implementation of a New MRAS Speed Sensorless Vector Control of Induction Machine vol.30, pp.2, 2015, https://doi.org/10.1109/TEC.2014.2366473