Abstract
The design for horizontal drain layer on soft ground starts from the decision that the material could be used or not, by verifying material condition in permeability of horizontal drain material according to the weight percent of the dry soil retained on #200 sieve. In the next step of the design, we estimate the thickness of horizontal drain layer to confirm trafficability of heavy machinery in construction work. Successively, the long-term functionality for good drainage of horizontal drain layer is checked and if needed, some means are considered. In this study, the system to recycle mixed coal ash in ash pond successfully as a horizontal drain material on soft ground is presented through the process and the result of its practical construction work. Namely, the pact is confirmed that mixed coal ash in ash pond should be sorted out by sieve screen to a certain extent and the remainders of this mixed coal ash on sieve openings be recycled, because the amount of finer particles than $75{\mu}m$ contained in mixed coal ash in ash pond is quite massive and irregular depending on the coal power plant or the location in same ash pond. In order to sort at large scale in situ, the dimension of a sieve squre hole and the sort-out method, etc. should be decided before the sort-out process. And, it is described that we need to manufacture classifier to sort out mixed coal ash in ash pond, too.
연약지반에 시공되는 수평배수층의 설계는 사용할 수평배수재의 투수성에 대한 재료 조건인 No.200체 통과백분율을 확인하여 재료의 사용 여부를 정하고, 시공장비의 주행성 확보를 위한 수평배수층의 두께를 산정한다. 그리고 이 수평배수층이 양호하게 장기적으로 배수성을 유지할지를 검토하고, 필요 시 방안을 강구하는 등 순차적인 단계로 실시한다. 본 연구에서는 회사장 혼합석탄재를 사용하여 실제 수평배수층을 시공하면서 그 과정과 결과를 고찰함으로써 연약지반에서 수평배수재로 이들 혼합석탄재를 원활하게 활용하기 위한 시스템을 제시하고 있다. 즉, 회사장 혼합석탄재는 회사장마다 그리고 같은 회사장에서도 위치에 따라 $75{\mu}m$보다 작은 세립분의 함유량이 불규칙하고 그 양이 상당히 많기 때문에 어느 정도까지는 세립분이 제거되도록 체로 선별하여 사용하여야 한다는 사실을 확인하며, 현장에서의 대량 선별을 위한 체의 눈금 크기, 선별 방법 등의 구체적 사항들을 제안하고 실제 시공을 위해서는 적절한 선별기 제작의 필요성을 기술하고 있다.