DOI QR코드

DOI QR Code

Study on Friction Characteristic of Sintered Friction Component for Synchronizer-Ring of Diesel Vehicle

디젤차량 싱크로나이저링을 위한 소결마찰재 개발 및 접합특성 평가

  • Song, Joon Hyuk (Jeonju Institute of Machinery and Carbon Composites) ;
  • Kim, Eun Sung (Dept. of Automatic Mechanical Engineering Vision Univ. of Jeonju) ;
  • Kim, Kyung-Jae (Jeonju Institute of Machinery and Carbon Composites) ;
  • Oh, Je-Ha (Jeonju Institute of Machinery and Carbon Composites) ;
  • Yang, Sung Mo (Dept. of Mechanical System Engineering Chonbuk Nat'l Univ.) ;
  • Kang, Shin Jae (Dept. of Mechanical Design Engineering Chonbuk Nat'l Univ.)
  • 송준혁 ((재)전주기계탄소기술원) ;
  • 김은성 (전주비전대학교 자동화기계과) ;
  • 김경재 ((재)전주기계탄소기술원) ;
  • 오제하 ((재)전주기계탄소기술원) ;
  • 양성모 (전북대학교 기계시스템공학부) ;
  • 강신재 (전북대학교 기계설계공학부)
  • Received : 2012.08.20
  • Accepted : 2012.11.12
  • Published : 2013.03.01

Abstract

The speed change performance of transmissions has become a serious issue because of the increase in the inertia moment that has accompanied increases in engine output and transmission size. Therefore, it is necessary to develop better wear resistant friction materials. In this study, an appropriate sintered friction component for the synchronizer ring of a diesel manual transmission was developed, and its bonding characteristics were analyzed. That is, a process for bonding an Fe-based base material and Cu-based sintered friction material was developed. BSE and EDX analyses of this bonding layer were conducted, along with a shear strength test, to determine the bonding characteristics.

엔진의 출력증대와 이에 따른 변속기의 크기 증가 등으로 인한 회전체의 관성증가로 변속기의 변속성능은 악조건이 되고 있다. 따라서, 이를 해결하기 위하여 내마모성이 높은 마찰소재의 개발이 요구된다. 디젤차량 수동변속기용 싱크로나이저 링에 요구되는 마찰특성에 적합한 소재를 개발하고, 이에 대한 접합 특성을 평가하였다. 즉, 철합금 모재와 동합금계 마찰재를 접합하는 공정을 개발하고, 접합층에 대하여 BSE분석, EDX분석을 수행하여 접합특성을 평가하였으며, 해당 시험편에 대하여 전단강도를 평가하였다.

Keywords

References

  1. Kim, K., Kim, K., and Park. H., "Development of PM Gears Produced by Selective Surface Densification," KSAE2011 Anual Conference, pp.2359-2366.
  2. Bengtsson S, Forden L, Dizdar S and Johansson P, 2001, "Surface Densified PM Transmissions Gears," 2001 International Conference on Power Transmission Components. Advances in High Performance Powder Metallurgy Applications, Ypsilanti MI, Oct16-17, pp. 1-25.
  3. Lee, J. J. and Kim, Y. H., 2002. "A Study on the Friction Characteristics of Automotive Composites Brake Pads Using Taguchi Method," Trans. Korean Soc. Mech. Eng. A, 26(4), pp. 660-666. https://doi.org/10.3795/KSME-A.2002.26.4.660
  4. Suzuki, N., Sawayama, S., Ilia, E. and Tutton, K., 2006, "New Material with Improved Machinability and Strength for Powder Forged Connecting Rods" SAE paper 2006-01-0603.
  5. Ilia, E., O'Neill, M., Tutton, K., Lanni, G., Letourneau, S. and Haehnel, M., 2005, "Benchmarking Industry: Powder Forging Makes a Better Connecting Rod," SAE Technical Paper 2005-01-0713.
  6. Sang, X., Wang, P., Ai, L., Li, Y. and Bu, J., 2011, "Study on Space Copper-Based Powder Metallurgy Friction Material and Its Tribological Properties," Advanced Materials Research, Vol. 284-286, Materials and Design, pp. 479-487. https://doi.org/10.4028/www.scientific.net/AMR.284-286.479
  7. Cho, Y. H., 2008, "Development on Syncronizer Ring of High-Friction Torque and High-Durability for Vehicle Transmission," Ministry of Knowledge Economy Regional Promotion Program, R&D Report 7000-0811.
  8. Choi,. B. H., Lee, J. H. and Song, K. T., 1996, "Influence of Graphite Content and Shape on the Cu-Based Sintered Friction Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 20, No. 1, pp. 44-52.
  9. Lee, J. H., Choi, B. H. and Kim, J., 1997. "A Study on the Development of Cu-Based Sintered Friction Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 21, No. 1, pp. 83-92.