Browse > Article
http://dx.doi.org/10.3795/KSME-A.2013.37.3.373

Study on Friction Characteristic of Sintered Friction Component for Synchronizer-Ring of Diesel Vehicle  

Song, Joon Hyuk (Jeonju Institute of Machinery and Carbon Composites)
Kim, Eun Sung (Dept. of Automatic Mechanical Engineering Vision Univ. of Jeonju)
Kim, Kyung-Jae (Jeonju Institute of Machinery and Carbon Composites)
Oh, Je-Ha (Jeonju Institute of Machinery and Carbon Composites)
Yang, Sung Mo (Dept. of Mechanical System Engineering Chonbuk Nat'l Univ.)
Kang, Shin Jae (Dept. of Mechanical Design Engineering Chonbuk Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.37, no.3, 2013 , pp. 373-378 More about this Journal
Abstract
The speed change performance of transmissions has become a serious issue because of the increase in the inertia moment that has accompanied increases in engine output and transmission size. Therefore, it is necessary to develop better wear resistant friction materials. In this study, an appropriate sintered friction component for the synchronizer ring of a diesel manual transmission was developed, and its bonding characteristics were analyzed. That is, a process for bonding an Fe-based base material and Cu-based sintered friction material was developed. BSE and EDX analyses of this bonding layer were conducted, along with a shear strength test, to determine the bonding characteristics.
Keywords
Sintered Friction Component; Cu-based Sintered Friction Material; Diffusion Bonding; Bonding Characteristics;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Kim, K., Kim, K., and Park. H., "Development of PM Gears Produced by Selective Surface Densification," KSAE2011 Anual Conference, pp.2359-2366.
2 Bengtsson S, Forden L, Dizdar S and Johansson P, 2001, "Surface Densified PM Transmissions Gears," 2001 International Conference on Power Transmission Components. Advances in High Performance Powder Metallurgy Applications, Ypsilanti MI, Oct16-17, pp. 1-25.
3 Lee, J. J. and Kim, Y. H., 2002. "A Study on the Friction Characteristics of Automotive Composites Brake Pads Using Taguchi Method," Trans. Korean Soc. Mech. Eng. A, 26(4), pp. 660-666.   과학기술학회마을   DOI   ScienceOn
4 Suzuki, N., Sawayama, S., Ilia, E. and Tutton, K., 2006, "New Material with Improved Machinability and Strength for Powder Forged Connecting Rods" SAE paper 2006-01-0603.
5 Ilia, E., O'Neill, M., Tutton, K., Lanni, G., Letourneau, S. and Haehnel, M., 2005, "Benchmarking Industry: Powder Forging Makes a Better Connecting Rod," SAE Technical Paper 2005-01-0713.
6 Sang, X., Wang, P., Ai, L., Li, Y. and Bu, J., 2011, "Study on Space Copper-Based Powder Metallurgy Friction Material and Its Tribological Properties," Advanced Materials Research, Vol. 284-286, Materials and Design, pp. 479-487.   DOI
7 Cho, Y. H., 2008, "Development on Syncronizer Ring of High-Friction Torque and High-Durability for Vehicle Transmission," Ministry of Knowledge Economy Regional Promotion Program, R&D Report 7000-0811.
8 Choi,. B. H., Lee, J. H. and Song, K. T., 1996, "Influence of Graphite Content and Shape on the Cu-Based Sintered Friction Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 20, No. 1, pp. 44-52.   과학기술학회마을
9 Lee, J. H., Choi, B. H. and Kim, J., 1997. "A Study on the Development of Cu-Based Sintered Friction Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 21, No. 1, pp. 83-92.   과학기술학회마을