Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Torque Estimation Using Precise Calculations of Inductance and Iron loss Mathematization

  • Cho, Gyu-Won (Dept. of Electrical Engineering, Changwon National University) ;
  • Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon National University)
  • Received : 2013.07.12
  • Accepted : 2013.08.21
  • Published : 2013.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The torque was calculated with inductance and iron loss. Because the linkage flux can change the inductance, and q-axis current can change the iron loss. Therefore, precise estimation of torque can achieve with the inductance and iron loss detail calculations. So, in this paper, the d, q-axis inductance was verified through CVCT(Current Vector Control Test) and DCT(Direct Current Test). Also in the iron loss calculation, the prediction of all areas of current magnitude, phase angle and speed was very difficult. And LUT(Look-Up Table) was spent time and resource largely. Therefore, iron loss mathematization was proposed according to current magnitude, phase angle and speed. Also, characteristics of IPMSM were comprised of analyzed and experimental values.

Keywords

References

  1. J.-W. Jung, J.-J. Lee, S.-O. Kwon, J.-P. Hong, and K.-N. Kim, "Equivalent circuit analysis of interior permanent magnet synchronous motor considering magnetic saturation", IEEE Trans on Magnetics, vol. 42, no. 4, pp.1303-1306, 2006. https://doi.org/10.1109/TMAG.2006.871951
  2. T. J. E. Miller, M. Popescu, C. Cossar, and M. Mc Gilp, "Performance Estimation of Interior Permanent-Magnet Brushless Motors Using the Voltage-Driven Flux-MMF Diagram," IEEE Trans On Magnetics, vol. 42, no. 7, pp. 1867-1872, 2006. https://doi.org/10.1109/TMAG.2006.874512
  3. L. Chedot and G. Friedrich, "A Cross Saturation Model for Interior Permanent Magnet Synchronous Machine. Application to a Starter-Generator," IEEE Industry Application Conference, vol. 1, pp. 64-70, 2004.
  4. D. M. Ionel, M. Popescu, S. J. Dellinger, T. J. E.Miller, R. J. Heideman, and M. I. McGilp, "On the variation with flux and frequency of the coreloss coefficients in electrical machines," IEEE Trans on Industry Applications, vol. 42, no. 3, pp. 658-668, 2006. https://doi.org/10.1109/TIA.2006.872941
  5. S. Morimoto, M. Sanada and Y. Taketa, "Wide-Speed Operation of interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator," IEEE Trans. Industry Applications, vol. IA-30, no. 4, July/Aug., pp. 920-926, 1994.
  6. Vernon. B, Honsinger, "The Inductance Ld and Lq of Reluctance Machines", IEEE Trans. On Power Apparatus and Systems, vol. pas-90, no. 1, 1971.
  7. Morimoto. S, Takeda. Y, Hirasa. T, Taniguchi. K, "Expansion of Operating Limits for Permanent Magnet Motor by Current Vector Control Considering Inverter Capacity", IEEE Trans. On Industry Application, vol.26, no. 5, pp. 866-871, 1990. https://doi.org/10.1109/28.60058