[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.11142/jicems.2013.2.3.300

Torque Estimation Using Precise Calculations of Inductance and Iron loss Mathematization

Cho, Gyu-Won (Dept. of Electrical Engineering, Changwon National University)
Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon National University)

Publication Information

Journal of international Conference on Electrical Machines and Systems / v.2, no.3, 2013 , pp. 300-305 More about this Journal

Abstract

The torque was calculated with inductance and iron loss. Because the linkage flux can change the inductance, and q-axis current can change the iron loss. Therefore, precise estimation of torque can achieve with the inductance and iron loss detail calculations. So, in this paper, the d, q-axis inductance was verified through CVCT(Current Vector Control Test) and DCT(Direct Current Test). Also in the iron loss calculation, the prediction of all areas of current magnitude, phase angle and speed was very difficult. And LUT(Look-Up Table) was spent time and resource largely. Therefore, iron loss mathematization was proposed according to current magnitude, phase angle and speed. Also, characteristics of IPMSM were comprised of analyzed and experimental values.

Keywords

d; q-axis inductance; Iron loss-mathematization; Torque; Linkage flux;

Citations & Related Records

Reference

1	D. M. Ionel, M. Popescu, S. J. Dellinger, T. J. E.Miller, R. J. Heideman, and M. I. McGilp, "On the variation with flux and frequency of the coreloss coefficients in electrical machines," IEEE Trans on Industry Applications, vol. 42, no. 3, pp. 658-668, 2006. DOI ScienceOn
2	J.-W. Jung, J.-J. Lee, S.-O. Kwon, J.-P. Hong, and K.-N. Kim, "Equivalent circuit analysis of interior permanent magnet synchronous motor considering magnetic saturation", IEEE Trans on Magnetics, vol. 42, no. 4, pp.1303-1306, 2006. DOI ScienceOn
3	T. J. E. Miller, M. Popescu, C. Cossar, and M. Mc Gilp, "Performance Estimation of Interior Permanent-Magnet Brushless Motors Using the Voltage-Driven Flux-MMF Diagram," IEEE Trans On Magnetics, vol. 42, no. 7, pp. 1867-1872, 2006. DOI ScienceOn
4	L. Chedot and G. Friedrich, "A Cross Saturation Model for Interior Permanent Magnet Synchronous Machine. Application to a Starter-Generator," IEEE Industry Application Conference, vol. 1, pp. 64-70, 2004.
5	S. Morimoto, M. Sanada and Y. Taketa, "Wide-Speed Operation of interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator," IEEE Trans. Industry Applications, vol. IA-30, no. 4, July/Aug., pp. 920-926, 1994.
6	Vernon. B, Honsinger, "The Inductance Ld and Lq of Reluctance Machines", IEEE Trans. On Power Apparatus and Systems, vol. pas-90, no. 1, 1971.
7	Morimoto. S, Takeda. Y, Hirasa. T, Taniguchi. K, "Expansion of Operating Limits for Permanent Magnet Motor by Current Vector Control Considering Inverter Capacity", IEEE Trans. On Industry Application, vol.26, no. 5, pp. 866-871, 1990. DOI ScienceOn