DOI QR코드

DOI QR Code

전이금속이 담지된 세리아의 메탄 산화 반응에 대한 연구

A Study of Methane Oxidation over Transition Metal (TM)/CeO2 (TM=Ni, Co, Cu, Fe)

  • 안기용 (한국과학기술연구원, 고온에너지재료연구단) ;
  • 정용재 (한양대학교 신소재공학과) ;
  • 이종호 (한국과학기술연구원, 고온에너지재료연구단)
  • Ahn, Ki-Yong (High-Temperature Energy Materials Research Center, Korea Institute of Science and Technology) ;
  • Chung, Yong-Chae (Department of Materials Science and Engineering, Hanyang University) ;
  • Lee, Jong-Ho (High-Temperature Energy Materials Research Center, Korea Institute of Science and Technology)
  • 투고 : 2012.07.30
  • 심사 : 2012.08.24
  • 발행 : 2012.08.31

초록

The properties of methane oxidation were studied in this research over transition metal containing $CeO_2$ (TM/$CeO_2$, TM=Ni, Co, Cu, Fe) with TM content of 5 wt. % at atmospheric pressure. The characteristics of catalysts were investigated by various characterization techniques, including XRD, GC, SEM and EPMA analyses. The catalytic tests were carried out in a fixed Rmix ratio of 1.5 ($CH_4/O_2$) in a fixed-bed reactor operating isothermally at atmospheric pressure. Only the Ni/$CeO_2$ catalysts showed syngas production above $400^{\circ}C$ via typical partial oxidation reaction whereas other catalysts induced complete oxidation resulting in the production of $CO_2$ and $H_2O$ in whole reaction temperature range. From the quantitative analysis on carbon deposition after catalytic tests, Cu/$CeO_2$ was found to show the highest resistance on carbon deposition. Therefore Cu can be proposed as an efficient catalyst element which can be combined with a conventional Ni-based SOFC anode to enhance the carbon tolerance.

키워드

참고문헌

  1. P. T. Anastas and M. M. Kirchoff, "Origins, Current Status, and Future Challenges of Green Chemistry", Acc. Chem. Res., Vol. 35, No. 9, 2002, pp. 686-694. https://doi.org/10.1021/ar010065m
  2. R. A. Hefner "Toward sustainable economic growth the age of energy gases", Int. J. Hydrogen Energy, Vol. 20, No. 12, 1995, pp. 945-948. https://doi.org/10.1016/0360-3199(95)00043-D
  3. H. Je, K. Cha, H. Kim, Y. Lee, C. Park, Y. Kim, "Stepwlse Production of Syngas and Hydrogen form Methane on Ferrite Based Media Added with YSZ", Trans. of the Korean Hydrogen and New Energy Society, Vol. 21, No. 1, 2010, pp. 50-57.
  4. M. poppinger, H. Landes, "Aspects of the Internal Reforming of Methane in Solid Oxide Fuel Cells", Ionics, Vol. 7, No. 1-2, 2001, pp. 7-15. https://doi.org/10.1007/BF02375461
  5. R. Peters, R. Dahl, U. Klüttgen, C. Palm, D. Stolten, "Internal Reforming of Methane in Solid Oxide Fuel Cell Systems", J. Power Source, Vol. 106, No. 1-2, 2002, pp. 238-244. https://doi.org/10.1016/S0378-7753(01)01039-4
  6. V. M. Janardhanan, Olaf Deutschmann, "CFD Analysis of a Solid Oxide Fuel Cell with Internal Reforming: Coupled Interactions of Transport, Heterogeneous Catalysis and Electrochemical Process", J. Power Sources, Vol. 162, No. 2, 2006, pp. 1192-1202. https://doi.org/10.1016/j.jpowsour.2006.08.017
  7. C. Chinda, S. Chanchaona, P. Brault, W. Wechsatol, "A Planar Anode-Supported Solid Oxide Fuel Cell Model with Internal Reforming of Natural Gas", Eur. Phy. J. Appl. Phy., Vol 54, No. 2, 2011, pp. 23405-23419. https://doi.org/10.1051/epjap/2011100145
  8. J. B. Claridge, M. L. H. Green, S. C. Tsang, A. P. E. York, A. T. Ashcroft, P. D. Battle, "A Study of Carbon Deposition on Catalysts during the Partial Oxidation of Methane to Synthesis Gas", Catal. Lett., Vol. 22, No. 4, 1993, pp. 299-305. https://doi.org/10.1007/BF00807237
  9. S. Liu, L. Xu, S. Xie, Q. Wang, G. Xiong, "Partial Oxidation of Propane to Syngas over Nickel Supported Catalysts Modified by Alkali Metal Oxides and Rare-earth Metal Oxides", Appl. Catal. A: Gen., Vol. 211, No. 2, 2001, pp. 145-152. https://doi.org/10.1016/S0926-860X(00)00865-6
  10. Q. Miao, G. Xiong, S. Sheng, W. Cui, L. Xu, X. Guo, "Partial Oxidation of Methane to Syngas over Nickel Based Catalysts Modified by Alkali Metal Oxide and Rare Earth Metal Oxide", Appl. Catal. A: Gen., Vol. 154, No. 1-2, 1997, pp. 17-27. https://doi.org/10.1016/S0926-860X(96)00377-8
  11. M. A. Goula, A. A. Lemonidou, W. Grünert, M. Baerns, "Methane Partial Oxidation to Synthesis Gas Using Nickel on Calcium Aluminate Catalysts", Catal. Tod., Vol. 32, No. 1-4, 1996, pp. 149-156. https://doi.org/10.1016/S0920-5861(96)00168-X
  12. C. H. Bartholomew, "Carbon Deposition in Steam Reforming and Methanation", Catal. Rev. -Sci. Eng., Vol. 24, No. 1, 1982, pp. 67-112. https://doi.org/10.1080/03602458208079650
  13. T. -J. Huang, H. -J. Lin, T. -C. Yu, "A Comparison of Oxygen-vacancy Effect ono Activity Behaviors of Carbon Dioxide and Steam Reforming of Methane over Supported Nickel Catalysts" Catal. Lett. Vol. 105, No. 3-4, 2005, pp. 239-247. https://doi.org/10.1007/s10562-005-8697-2
  14. O. A. Marina, M. Mogensen, "High-temperature Conversion of Methane on a Composite Gadoliniadoped Ceria-gold Electrode", Appl. Catal. A: Gen., Vol. 189, No. 1, 1999, pp.117-126. https://doi.org/10.1016/S0926-860X(99)00259-8
  15. K. Ahn, J. H. Oh, D. H. Prasad, H. Kim, Y. -C. Chung, H. -R. Kim, J. -W. Son, H. -W. Lee, J. -H. Lee, "A Comparative Study of Catalytic Patial Oxidation of Methane over $CeO_{2}$ Supported Metallic Catalysts", J. Nano. Nano., Vol. 11, No. 7, 2011, pp. 6414-6419. https://doi.org/10.1166/jnn.2011.4383
  16. S. Park, R. J. Gorte, J. M. Vohs, "Applications of Heterogeneous Catalysis in the Direct Oxidation of Hydrocarbons in a Solid-oxide Fuel Cell", Appl. Catal. A: Gen., Vol. 200, No. 1-2, 2000, pp. 55-61. https://doi.org/10.1016/S0926-860X(00)00650-5
  17. L. Jia, X. Wang, B. Hua, W. Li, B. Chi, J. Pu, S. Yuan, L. Jian, "Computational Analysis of Atomic C and S adsorption on Ni, Cu, and Ni-Cu SOFC anode surfaces", Int. J. Hydrogen Energy, Vol. 37, 2012, pp. 11941-11945. https://doi.org/10.1016/j.ijhydene.2012.05.041
  18. J. Ozaki, M. Takei, K. Takakusagi, N. Takahashi, "Carbon Deposition on a Carbon Deposition on a Ni/Al2O3 Catalyst in Low Temperature Gasification Using $C_{6}$-hydrocarbons as Surrogate Biomass Tar", Fuel Processing Tech., Vol. 102, 2012, pp. 30-34. https://doi.org/10.1016/j.fuproc.2012.04.021