DOI QR코드

DOI QR Code

A Study on Optimum Confined Effect for Internally Confined Hollow CFT Columns under Uniaxial Compression

일축압축을 받는 내부 구속 중공 CFT 기둥의 최적 구속 효과 연구

  • 원덕희 (한국해양과학기술원 연안개발.에너지 연구부) ;
  • 한택희 (한국해양과학기술원 연안개발.에너지 연구부) ;
  • 윤나리 (고려대학교 건축사회환경공학과) ;
  • 강영종 (고려대학교 건축사회환경공학과)
  • Received : 2012.02.21
  • Accepted : 2012.04.29
  • Published : 2012.07.15

Abstract

Recently, study of confining effect in column members is progressed. But these studies are limited to about RC column and external confining effect in hollow columns. Internal confining effect in hollow columns has not researched. Internal confining stress is assumed the same external confining stress in hollow columns. In this study, there are to investigate the internal direction confining effect in ICH CFT column by FEA analysis. FEA analysis methods have verified by experimental values. Parametric study has performed as thickness of internal tube, hollow ratio, diameter of column and bending stiffness between concrete and external tube. Modified equations have suggested to estimating economic and reasonable thickness of internal tube.

최근 기둥의 구속효과에 대한 연구가 많이 연구되어지고 있다. 주로 철근 콘크리트 기둥과 CFT(Concrete Filled Tube)기둥과 같이 중실 기둥에 대한 연구로 한정되어 있는 반면 중공 기둥에 대한 구속효과 연구가 매우 미비한 실정이다. 중공 기둥의 외부 구속력에 대한 연구가 주로 연구되고 있고 내부 구속력을 외부 구속력과 동일하게 가정하고 구속 콘크리트의 구속효과를 평가하고 있다. 본 연구에서는 중공 CFT 기둥에 내부 튜브를 삽입하여 구속 콘크리트 3축 구속 상태로 놓이게 하여 연성 및 강도를 상승 시킨 내부 구속 중공 CFT 기둥(Internally Confined Hollow CFT, ICH CFT)의 최적 구속메커니즘을 도출하기 위한 연구를 하였다. 내부튜브 두께, 중공비, 기둥의 직경, 콘크리트와 외부튜브의 휨강성비를 매개변수로 삼아 범용 FEM 프로그램으로 비선형 해석 연구를 수행하여 최적 내부 구속력 도출을 통하여 수정 파괴 조건식을 제안하였다. 수정 파괴 조건식은 최적 내부 튜브의 두께를 산정하여 기둥이 경제성을 확보하도록 하였다.

Keywords

References

  1. 한국콘크리트학회(2007) 콘크리트구조설계기준 해설.
  2. 한택희, 염응준, 한상윤, 강영종(2007) 구속효과를 고려한 내부 구속 중공 CFT 부재의 비선형 콘크리트 모델 개발, 한국강구조학회논문집, 한국강구조학회, 제19권 제1호, pp. 43-52.
  3. 한택희, 한상윤, 강영종(2007) 내부 구속 중공 철근 콘크리트 부재의 비선형 재료 모델 개발, 대한토목학회논문집, 대한토목학회, 제27권 제1호, pp. 11-26.
  4. Shakir-Khalil, H. and Illouli, S. (1987) composite columns of concentric steel tubes, Proceeding of Conference on the Design and Construction of Non Conventional Structures, pp. 73-82.
  5. Tao, Z., Han, L.H., and Zhao, X.L. (2004) Behavior of concretefilled double skin (CHS Inner and CHS Outer) Steel tubular stub columns and beam columns, Journal of Constructional Steel Research, Vol. 60, pp. 1129-1158. https://doi.org/10.1016/j.jcsr.2003.11.008
  6. Wei, S., Mau, S.T., Vipulanandan, C., and Mantrala, S.K. (1995) Performance of new sandwich tube under axial loading: experiment, Journal of Structural Engineering, ASCE, Vol.121, No. 12, pp. 1806-1814. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1806)
  7. Zhao, X-L. and Grzebieta, R. (2002) Strength and ductility of concrete filled double skin (SHS Inner and SHS Outer) tubes, Thin-Walled Structures, Vol. 40, pp. 199-213. https://doi.org/10.1016/S0263-8231(01)00060-X

Cited by

  1. Internal Confining Stress of Internally Confined Hollow Columns under Compressive Load vol.25, pp.3, 2013, https://doi.org/10.7781/kjoss.2013.25.3.243
  2. Experimental Study for Confined Concrete of Double Skinned Composite Tubular Columns by Uniaxial Compression Test vol.4, pp.3, 2013, https://doi.org/10.11004/kosacs.2013.4.3.013