Acknowledgement
Grant : 비재래 유전의 최적생산을 위한 특성화 및 모니터링 시스템 개발
Supported by : 한국연구재단
References
- 김열, 2005, 절리면 거칠기 정량화에 대한 연구, 석사논문, 강원대학교, 9-39.
- 천병식, 김대영, 2001, 암석 절리면 거칠기의 정량화에 대한 수치적 연구, 한국지반공학회 논문집, 17(1), 85-97.
- Barton, N.R. and Choubey, V., 1977, The shear strength of rock joints in theory and practice, J. of Rock Mech, 10, 1-54. https://doi.org/10.1007/BF01261801
- Filliben, J.J., 1975, The Probability Plot Correlation Coefficient Test for Normality, Technometrics, American Society for Quality, 17(1), 111-117
- Haldar, A. and S. Mahadevan, 2000, Probability, Reliability, and Statistical Methods in Engineering Design, John Wiley and Sons, 112-117.
- Kulatilake, P.H.S.W., G. Shou, T.H. Huang and R.M. Morgan, 1995, New peak shear strength criteria for anisotropic rock joints, Int. J. Rock Mech. Min. Sci. and Geomech. Elsevier Science Ltd., 32(7), 673-697. https://doi.org/10.1016/0148-9062(95)00022-9
- Myers, N.O., 1962, Characteristics of surface roughness, Wear 5, 182-189. https://doi.org/10.1016/0043-1648(62)90002-9
- Patton, F.D., 1966, Multiple modes of shear failure in rock. Proc. 1st confr. Int. Soc. Rock Mech., Lisbon 1, 509-513.
- Rieger, P., Ullrich, A. and Reichert, R., 2010, Laser scanners with echo digitization for full waveform analysis, RIEGL LMS GmbH, 3-4.
- Tse, R. and Cruden, D.M., 1979, Estimating joint roughness coefficients. Int. Journal of Rock Mech. Min. Sci. Geomech. 16, 303-304. https://doi.org/10.1016/0148-9062(79)90241-9
Cited by
- 퇴적암 내의 지질구조가 비탈면 안정성에 미치는 영향 : 대구 북서부 지역의 예 vol.22, pp.1, 2011, https://doi.org/10.9720/kseg.2012.22.1.001