Browse > Article
http://dx.doi.org/10.9720/kseg.2011.21.1.001

Analysis of Random Properties for JRC using Terrestrial LiDAR  

Park, Sung-Wook (Department of Geoinformation Engineering, Sejong University)
Park, Hyuck-Jin (Department of Geoinformation Engineering, Sejong University)
Publication Information
The Journal of Engineering Geology / v.21, no.1, 2011 , pp. 1-13 More about this Journal
Abstract
Joint roughness is one of the most important parameters in analysis of rock slope stability. Especially in probabilistic analysis, the random properties of joint roughness influence the probability of slope failure. Therefore, a large dataset on joint roughness is required for the probabilistic analysis but the traditional direct measurement of roughness in the field has some limitations. Terrestrial LiDAR has advantagess over traditional direct measurement in terms of cost and time. JRC (Joint Roughness Coefficient) was calculated from statistical parameters which are known from quantitative methods of converting the roughness of the material surface into JRC. The mean, standard deviation and distribution function of JRC were obtained, and we found that LiDAR is useful in obtaining large dataset for random variables.
Keywords
Terrestrial LiDAR; Joint roughness coefficient; Digital surface model;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Tse, R. and Cruden, D.M., 1979, Estimating joint roughness coefficients. Int. Journal of Rock Mech. Min. Sci. Geomech. 16, 303-304.   DOI   ScienceOn
2 Rieger, P., Ullrich, A. and Reichert, R., 2010, Laser scanners with echo digitization for full waveform analysis, RIEGL LMS GmbH, 3-4.
3 Kulatilake, P.H.S.W., G. Shou, T.H. Huang and R.M. Morgan, 1995, New peak shear strength criteria for anisotropic rock joints, Int. J. Rock Mech. Min. Sci. and Geomech. Elsevier Science Ltd., 32(7), 673-697.   DOI   ScienceOn
4 Myers, N.O., 1962, Characteristics of surface roughness, Wear 5, 182-189.   DOI   ScienceOn
5 Patton, F.D., 1966, Multiple modes of shear failure in rock. Proc. 1st confr. Int. Soc. Rock Mech., Lisbon 1, 509-513.
6 Filliben, J.J., 1975, The Probability Plot Correlation Coefficient Test for Normality, Technometrics, American Society for Quality, 17(1), 111-117
7 천병식, 김대영, 2001, 암석 절리면 거칠기의 정량화에 대한 수치적 연구, 한국지반공학회 논문집, 17(1), 85-97.
8 Haldar, A. and S. Mahadevan, 2000, Probability, Reliability, and Statistical Methods in Engineering Design, John Wiley and Sons, 112-117.
9 Barton, N.R. and Choubey, V., 1977, The shear strength of rock joints in theory and practice, J. of Rock Mech, 10, 1-54.   DOI
10 김열, 2005, 절리면 거칠기 정량화에 대한 연구, 석사논문, 강원대학교, 9-39.