DOI QR코드

DOI QR Code

H형(形) 강(鋼) 제품(製品)의 절단(切斷) 모델 최적화(最適化)에 관한 연구(硏究)

The Development of the Optimization Cutting Model for the H-Beam Steel

  • 남호기 (인천대학교 산업경영공학과) ;
  • 박상민 (인천대학교 산업경영공학과) ;
  • 조종남 (인천대학교 산업경영공학과 대학원) ;
  • 김종현 (인천대학교 산업경영공학과 대학원)
  • Nam, Ho-Ki (Department of Industrial Management & Engineering, Incheon University) ;
  • Park, Sang-Min (Department of Industrial Management & Engineering, Incheon University) ;
  • Joh, Jong-Nam (Department of Industrial Management & Engineering, Graduate School of Incheon University) ;
  • Kim, Jhong-Hyun (Department of Industrial Management & Engineering, Graduate School of Incheon University)
  • 투고 : 2011.04.18
  • 심사 : 2011.12.23
  • 발행 : 2011.12.31

초록

Recent cross-country competition and Chinese steel industry because of the emerging steel industry in Korea is a very difficult situation. Therefore, the steel industry in order to overcome this difficult market environment, the quality, cost competitiveness, enhance customer service levels and enhance international competitiveness through is needed. In this study, the purpose of strengthening the competitiveness of steel companies in order and hit the recovery of raw materials have been developed to optimize the model, developed before and after the results were analyzed. In addition, when applied to other products in order to minimize risk and optimize cutting trial stage of development details of the model is presented in detail. Therefore, the developed model was applied to order the recovery of raw materials hits and significantly improved production planning time has been shortened dramatically. In the present study the contents of other products when properly applied and the competitiveness of companies to improve customer service levels are expected to be helpful.

키워드

참고문헌

  1. 철강협회, "철강연감", 한국철강협회 외, 2010, pp.19-132
  2. 황규승외, "경영과학의 이해", 학현사, 2009, pp. 1-9
  3. 신도현, "제지산업의 Trim Optimizer 개발에 관한연구", 연세대, 2007, pp. 10-33
  4. 이정철, "한국과 중국의 철강산업 국제경쟁력 비교분석에 관한 연구", 원광대, 2009, pp. 8-78
  5. 김광희, "철근 손율 최소화 프로그램 개발에 관한연구", 고려대, 2002, pp. 8-58
  6. 김선국외, " 철근 손율을 줄이기 위한 최적화 알고리즘개발에관한 연구", 대한건축학회논문집 제7권, 2001
  7. 이재열외, "철근물량산출 및 손율 최적화시스템 개발연구", 대한건축학회논문집 제16권", 1996
  8. POSCO, "디지털 포스코", 21세기북스, 2001
  9. POSCO, "멈추지 않는 진화", 21세기북스, 2002
  10. 그란트 노리스외, "e-Business and ERP", 풀푸레,2000
  11. 마틴V외, "e-Business 성공 모델", 풀푸레, 2000
  12. 문찬오, "PI/ERP 구현 후, 변화관리활동이 사용자만족도에 미치는 영향", 명지대, 2009
  13. 선은수, "중소기업의 ERP 도입 후 운영 성공 요인에대한 사례 연구", 고려대, 2004
  14. 이정철, "전사적 자원관리(ERP) 시스템 도입이 직무재설계 및 조직효과성에 미치는 영향에 관한 연구",고려대, 2008
  15. 진영인, "ERP 시스템 도입 후 효율적인 운영을 위한중요 요인에 관한 연구", 동국대, 2000
  16. G.T. Thuesen, W.T. Fabrycky, "Engineering economy", prentice hall, 1993
  17. Ronald L. Rardin, "Optimization in Operations Research", prentice hall, 1998
  18. Laurence A. Wolsey, "Integer Programming", John Wiley & Sons, 1998
  19. Stephen G. Nash, and Ariela Sofer, "Linear And nonlinear Programming", McGraw hill international Editions, 1996
  20. Mokhtar S. Bazaraa, John J. Tarvis, Hanif D. Sherali, "Linear Programming and NetWork Flows", John Wiley & Sons, 1984
  21. David G. Luenberger, "Linear and Nonlinear Programming", Addison Wesley, 1984
  22. Leon S. Lasdon, "Optmization Theory for Large Systems", The Macmillan Company, 1972
  23. Nicoletti, L. M. , Stauffer, G. , "An Industrial Cutting Stock Problem", Boston; London; Kluwer Academic Publishers, 2002
  24. Saad, O.M, "On The Solution of Multiobjective Cutting Stock Problem in The Aluminumindustry", International Fuzzy Mathematics Institute, 2008
  25. Alves, C., "A stabilized branch-and-price-and-cut algorithm for the multiple length cutting stock problem", Elsevier Science B.V., Amsterdam., 2008