한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제27권5호
  • /
  • Pages.75-84
  • /
  • 2010
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

다단 이송 성형 공정 해석을 통한 자동차 센터 힌지 성형용 SPFH 590 고강도 강판 블랭크 설계

Blank Design of SPFH 590 Steel Sheet for Stamping of Center Hinge of Automotive via Analysis of Transfer Forming Process with Multi-Stages

  • 투고 : 2010.03.10
  • 심사 : 2010.04.08
  • 발행 : 2010.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this paper is to design the blank shape of SPFH 590 high strength steel for stamping of the center hinge of automotive via numerical analyses and experiments for multi-stages transfer forming process. Three-dimensional elasto-plastic finite element analyses for the transfer forming process with six stages were performed using a commercial code AUTOFORM V4.2. The influence of the blank shape on the formability and the shape conformity were quantitatively examined through the FE analyses. From the results of the FE analysis, a feasible shape of the blank and the forming load were estimated. Stamping experiments were carried out using the proposed blank shape. The results of experiments were shown that the center hinge parts with the desired shapes can be manufactured successfully as the proposed blank shape is used. Through the comparison of the results of the experiments with those of the analyses, it was shown that the estimation of blank shape using the FE analysis is a proper methodology to create a feasible shape of the blank for the center hinge of automotive.

키워드

참고문헌

  1. Lim, K. C., "Evaluation of Introduction of Electric Vehicles in the City," Journal of Energy Engineering, Vol. 6, No. 2, pp. 115-118, 1997.
  2. Choi, Y., Yeo, H. T., Park, J. H., Kang, M. G., Oh, K. H. and Park, S. W., "Press Forming of Extruded Aluminum Profile for Automotive Parts," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 5, pp. 51-58, 2006.
  3. Andersson, R., Schedin, E., Magnusson, C., Ocklund, J. and Persson, A., "The Applicability of Stainless Steel for Crash Absorbing Components," SAE Transactions, Vol. 111, No. 6, pp. 1918-1922, 2002.
  4. Kim, K. J., Rhee, M. H., Choi, B. I., Kim, C. W., Sung, C. W., Han, C. P., Kang, K. W. and Won, S. T., "Development of Application Technique of Aluminum Sandwich Sheets for Automotive Hood," International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 4, pp. 71-75, 2009. https://doi.org/10.1007/s12541-009-0073-5
  5. Furusako, S., Uenishi, A. and Miyazaki, Y., "Improvement of Crashworthiness by Application of High Strength Steel for Light Weight Auto Bodies," Journal of the Society of Automotive Engineers of Japan, Vol. 55, No. 10, pp. 36-39, 2001.
  6. Kim, J. C., Kwon, T. W. and Jeon, J. H., "Application Technology of High Strength Hot-rolled Steels for Automotive Lightweight Chassis Parts," Proceedings of 2005 Autumn Annual Meeting of the Korean Society for Technology of Plasticity, pp. 43-45, 2005.
  7. Kim, K. J., Sung, C. W., Baik, Y. N., Lee, Y. H., Bae, D. S., Kim, K. H. and Won, S. T., "Hydroforming Simulation of High Strength Steel Cross-members in an Automotive Rear Subframe," International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 3, pp. 55-58, 2008.
  8. http://www.worldautosteel.org/projects/AHSSGuidelines/AHSS-application-guidelines-version-4.aspx
  9. Lindgren, M., "Cold Roll Forming of a U-Channel Made of High Strength Steel," Journal of Materials Processing Technology, Vol. 186, No. 1-3, pp. 77-81, 2007. https://doi.org/10.1016/j.jmatprotec.2006.12.017
  10. Lee, D. H., Kim, T. J., Lim, J. D. and Lim, H. J., "Development of High Strength Steel Body by Hot Stamping," Transactions of Materials Processing, Vol. 18, No. 4, pp. 304-309, 2009. https://doi.org/10.5228/KSPP.2009.18.4.304
  11. Ko, D. C., An, J. H., Jang, M. J., Bae, J. H., Kim, C. H. and Kim, B. M., "Process Design of Seat Rail in Automobile by the Advanced High Strength Steel of DP780," Transactions of Materials Processing, Vol. 17, No. 3, pp. 197-202, 2008. https://doi.org/10.5228/KSPP.2008.17.3.197
  12. Ahn, D. G., Song, D. H., Noh, G. B. and Han, G. Y., "Stamping Die Design of Inner Reinforcement Panel for Automotive," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 2, pp. 60-68, 2009.
  13. Son, K. and Shim, H., "Optimal Blank Shape Design Using the Initial Velocity of Boundary Nodes," Journal of Materials Processing Technology, Vol. 134, No. 1, pp. 92-98, 2002.
  14. Park, S. H., Yoon. J. H., Yang, D. Y., Kim, Y. H. and Lee, J. H, "A Study on the Initial Blank Design Using Ideal Forming Theory," Transactions of Korea Society of Automotive Engineers, Vol. 5, No. 4, pp. 207-218, 1997.
  15. Zhang, Z., Liu, Y., Du, T. and Li, Z., "Blank Design and Formability Prediction of Complicated Progressive Die Stamping Part Using a Multi-step Unfolding Method," Journal of Materials Processing Technology, Vol. 205, No. 1-3, pp. 425-431, 2008. https://doi.org/10.1016/j.jmatprotec.2007.11.236