• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1487-1492
• /
• 2010

The objective of this study is to design the conformal cooling channels for the mould of a plastic drawer of a refrigerator by analysis of three-dimensional injection molding. In order to obtain the desired design of the conformal cooling channels, the influence of the diameter and the position of the conformal cooling channels on the moulding characteristics and the product qualities were quantitatively examined. From the results of the examination, an optimal design of the conformal cooling channels, which ensures uniform cooling and minimum potential deformation of the molded drawers, was estimated. By comparing the designed mould and a conventional mould with linear cooling channels from the viewpoints of the product qualities as well as cooling and cycle times, it was shown that the mould with conformal cooling channels can simultaneously improve the productivity of the injection moulding process and the product qualities.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.10-10
• /
• 2009

파이프 용접은 중력의 영향으로 인하여 위치에 따라 같은 용접변수라도 비드 형상이 매우 달라 지게 된다. 또한 지금까지 많은 용접 기술자들이 위험하고 까다로운 환경에서 수작업으로 용접을 실행하였다. 따라서 이러한 이유로 용접 자동화 공정이 반드시 필요하게 된다. 본 연구에서는 FCAW를 사용하여 파이프 모재 대신 필릿 평판을 아래보기, 위보기 자세를 포함하여 9개 자세에서 실행하였다. 용접 자세를 비롯한 용접 변수와 비드 형상 변수간의 관계를 비선형 회귀 분석과 구간적 3차 에르미트 보간법을 이용하여 주어진 용접 변수에서의 비드 단면의 형상을 예측하고, 비드의 결함 유무를 파악하였다. 이러한 방법을 통하여 자세에 따라서 용접 결함이 없는 용접 변수를 구할 수 있었다. 시각센서를 이용하여 용접 후 비드 형상에 대해 모니터링을 실시하였다. 모니터링의 알고리즘은 영상획득, 이진화, 세선화, 적응형 미디언 필터링, 적응형 허프 변환, 용접 결함 검출의 순서로 구성되어 있으며, 본 연구에서는 보다 빠른 영상처리를 위하여 적응형 미디언 필터링을 제시하였다. 모니터링을 통하여 2차원 비드 단면뿐만 아니라, 디루니 삼각법을 적용하여 3차원으로 비드 표면을 표현할 수 있다. 보간법을 사용하여 얻은 비드 형상과 시각 센서를 통하여 얻은 비드 형상간의 비교를 통하여 본 연구의 적합성 여부를 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.67-73
• /
• 2006

In this paper, a reconfigurable model following flight control method is proposed based on direct adaptive scheme using parameter estimation. Adaptive control scheme updates the control gains to make the system output follow the reference output even when fault occurs. By adopting the frequency domain parameter estimation method, system changes by the fault can be estimated. Recursive Fourier transformation is used for system identification. Using recursive Fourier transform, the proposed adaptive control algorithm guarantees the system stability and improves the system characteristics. To evaluate the performance of proposed control method, numerical simulations are performed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.331-340
• /
• 2010

The basic theory and application of new adaptive finite element algorithm have been proposed in this study including the adaptive hp-refinement strategy, and the effective method for constructing hp-approximation. The hp-adaptive finite element concept needs the integrals of Legendre shape function, nonuniform p-distribution, and suitable constraint of continuity in conjunction with irregular node connection. The continuity of hp-adaptive mesh is an important problem at the common boundary of element interface. To solve this problem, the constraint of continuity has been enforced at the common boundary using the connectivity mapping matrix. The effective method for constructing of the proposed algorithm has been developed by using hierarchical nature of the integrals of Legendre shape function. To verify the proposed algorithm, the problem of simple cantilever beam has been solved by the conventional h-refinement and p-refinement as well as the proposed hp-refinement. The result obtained by hp-refinement approach shows more rapid convergence rate than those by h-refinement and p-refinement schemes. It it noted that the proposed algorithm may be implemented efficiently in practice.

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.409-415
• /
• 2011

TV broadcasting platform is evolving to the digital-TV, which is supporting data broadcasting service. Although the data broadcasting services (i.e., games, wether information, stock trading service) provide rich entertainment to viewers, they make the operation manners of digital-TV so complex that some viewers feel difficulty in using their TV sets. The paper tackles the problem by devising a method for constructing viewer-specific EPG configurations based on the viewers' ability of handling IT devices. The paper also propose an environment (e.g., EPG configuration transmitting method, EPG structure) that implements dynamically an EPG configuration based on the viewer's choice of EPG configuration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.509-515
• /
• 2013

In this study, the real-coded adaptive range multi-objective genetic algorithm code, which represents the global multi-objective optimization algorithm, was developed for an airfoil shape design. In order to achieve the better aerodynamic characteristics than reference airfoil at landing and cruise conditions, maximum lift coefficient and lift-to-drag ratio were chosen as object functions. Futhermore, the PARSEC method reflecting geometrical properties of airfoil was adopted to generate airfoil shapes. Finally, two airfoils, which show better aerodynamic characteristics than a reference airfoil, were chosen. As a result, maximum lift coefficient and lift-to-drag ratio were increased of 4.89% and 5.38% for first candidate airfoil and 7.13% and 4.33% for second candidate airfoil.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1647-1653
• /
• 2011

The cycle time in injection moulding greatly depends on the cooling time of the plastic part that is controlled by cooling channels. Cooling channels are required to facilitate the heat transfer rate from the die to the coolant without reducing the strength of the die. Employing layered manufacturing techniques (LMT), a die embedding conformal cooling channels can be fabricated directly while conventional cooling channels are usually made of straight drilled hole. Meanwhile, H13 tool steel is widely used as the die material because of its high thermal resistance and dimensional stability. However, H13 with a low thermal conductivity is not efficient for certain part geometries. In this context, the use of functionally graded materials (FGMs) between H13 and copper may circumvent a tradeoff between the strength and the heat transfer rate. This paper presents a method for modeling of conformal cooling channels made of FGMs.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.301-304
• /
• 2002

그레이 스케일 영상의 객체 분할시 경계면의 모호함이 발생하여 정확하게 객체를 분할.검출 할 수 없으며 또한 영상 레벨에 따라 결과에 많은 영향을 미치게 된다 본 논문에서는 그 경계 부분을 정확하게 분할 . 검출하는 방법으로 적응적 형상학을 웨이브렛 알고리즘에 적용한후 최적의 영상을 찾는 알고리즘을 구현하였다. 본 논문은 입력 영상의 임계값에 따른 적응적 형태학을 이용하여 영상의 경계면을 레벨 업 시킨 후, 이를 웨이브렛에 적용하여 최적의 에지를 검출하였다. 또한, 기존의 영상 에지 검출알고리즘인 Sobel 에지 검출과 다른 웨이브렛 기저 계수를 적용한 에지 검출 방법과 비교하고, 제안된 알고리즘이 기존의 다른 에지 검출보다 우수함을 확인하였다. 특히 에지와 에지의 부분이 가까울 때 정확한 에지를 검출하였으며, 완만한 곡선을 가지고 있는 부분에서 더 우수한 결과 에지를 얻을 수 있음을 확인하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.92-98
• /
• 2020

In this study, an injection mold with conformal cooling channels was designed and manufactured for use in the production of a thick plastic cosmetic container that required high gloss surfaces. A cooling analysis verified the design of the conformal cooling channel for the cosmetic container, and also showed that the cooling efficiency was superior to that of the straight cooling channel. Slide cores designed with the conformal cooling channel were manufactured using the Layers Parting method and vacuum diffusion bonding. Subsequent test injection and quality inspection showed no problem in the appearance and dimensional accuracy of the produced product. The cycle time for product production was about 110 seconds, sufficient for mass production.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.89-99
• /
• 2006

In this paper a new shape reconstruction method that allows us to construct surface models from very large sets of points is presented. In this method the global domain of interest is divided into smaller domains where the problem can be solved locally. These local solutions of subdivided domains are blended together according to weighting coefficients to obtain a global solution using partition of unity function. The suggested approach gives us considerable flexibility in the choice of local shape functions which depend on the local shape complexity and desired accuracy. At each domain, a quadratic polynomial function is created that fits the points in the domain. If the approximation is not accurate enough, other higher order functions including cubic polynomial function and RBF(Radial Basis Function) are used. This adaptive selection of local shape functions offers robust and efficient solution to a great variety of shape reconstruction problems.