한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제23권4호
  • /
  • Pages.1-5
  • /
  • 2009
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

Effect on the Residual Stress of Cure Profiles, Fillers and Mold Constraints in an Epoxy System

  • Moon, Chang-Kwon (Pukyong National University, Division of Materials Science and Engineering) ;
  • Nam, Ki-Woo (Pukyong National University, Division of Materials Science and Engineering)
  • 발행 : 2009.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A dilatometer was used to investigate the effect of cure conditions, mold types and the presence of filler in an epoxy system. These studies showed shrinkage in the cured epoxy when heating it through the glass transition temperature region. The magnitude of the shrinkage, related to stress build up in the epoxy during curing, was influenced by the processing conditions, filler presence and the nature of the mold used to contain the resin. Cure and cyclic cure at a lower temperature, prior to a post cure, decreased the magnitude of observed shrinkage. Cure shrinkage decreased with the number of cyclic cures. Post cured samples outside the mold led to less shrinkage compared with samples in the mold. Sample cured in a silicon mold represented less shrinkage than sample cured in an aluminum mold. Sample containing kaolin filler showed less shrinkage than unfilled sample.

키워드

참고문헌

  1. Adams, M.E., Campbell, G.A. and Cohen, A. (1991). "Thermal-stress Induced Damage in a Thermoplastic Matrix Material for Advanced Composites", Polym. Eng. Sci., Vol 31, pp 1337 1343 https://doi.org/10.1002/pen.760311808
  2. Adolf, D.B., Martin, J.E., Chambers, R.S., Burchett. S.N. and Guess, T.R. (1998). "Stresses During Thermoset Cure", J. Mater. Res., Vol 13, pp 530-550 https://doi.org/10.1557/JMR.1998.0069
  3. Eijpe, M.P.I.M. (1997). A Modified Layer Removal Method for Determination of Residual Stresses in Polymeric Composites, Enschede: Mechanical Engineering, University Twente
  4. Favre, J.P. (1988). "Residual Thermal Stresses in Fibre Reinforced Composite Materials .a Review", J. Mech. Behav. Mater., Vol 1, pp 37-53
  5. Johnston, N.J., Towell, T.W. and Hergenrother, P.M. (1991). "Physical and Mechanical Properties of High-Performance Thermoplastic Polymers and their Composites", In:Carlsson LA, editor. Thermoplastic composite materials. Amsterdam: Elsevier Science Publishers, pp 27 71
  6. Kan, K.N., Nikolayevich, A.F. and Miilen, E.A. (1975). "Abnormal Course of Dilatometric Curve Near the Glass Transition Point", Polymer Science USSR, Vol 17, pp 518-519 https://doi.org/10.1016/0032-3950(75)90529-8
  7. Kim, J.K. and Mai, Y.W. (1998). "Residual Stresses. In:Engineered Interfaces in Fiber Reinforced Composites", Oxford: Elsevier Science Ltd., pp 308 320
  8. Manson, J.A.E. and Seferis, J.C. (1992). "Process Simulated Laminate (Psl) . A Methodology to Internal-stress Characterization in Advanced Composite Materials", J. Compos. Mater., Vol 26, pp 405 431 https://doi.org/10.1177/002199839202600305
  9. Plepys, A., Vratsanos, M.S. and Farris, R.J. (1994). "Determination of Residual Stresses using Incremental Linear Elasticity", Composite Structures, Vol 27, pp 51-56 https://doi.org/10.1016/0263-8223(94)90066-3
  10. Prasatya, P., McKenna, G.B. and Simon, S.L. (2001). "A Viscoelastic Model for Predicting Isotropic Residual Stresses in Thermosetting Materials: Effects of Processing Parameters", J. Comp. Mater., Vol 35, pp 826-848 https://doi.org/10.1177/002199801772662424
  11. Russel, J.D., Madhukar, M.S., Genidy, M.S. and Lee, A.Y. (2000). "A New Method to Reduce Cure-Induced Stresses in Thermoset Polymer Composites, Part III: Correlating Stress History to Viscosity, Degree of Cure, and Cure Shrinkage", J. comp. Mater., Vol 34, pp 1926-1947 https://doi.org/10.1106/UY9U-F2QW-2FKK-91KG
  12. Schulz, W.A., Myers, D.G., Singer, T.N., Ifju, P.G. and Haftka, R.T. (2005). "Determination of Residual Stress and Thermal History for IM7/977-2 Composite Laminates", Compos. Sci. Technol., Vol 65, pp 2014 2024 https://doi.org/10.1016/j.compscitech.2005.04.017
  13. Unger, W.J. and Hansen, J.S. (1998). "Method to Predict the Effect of Thermal Residual Stresses on the Free-edge Delamination behavior of Fibre Reinforced Composite Laminates", J. Compos. Mater., Vol 32, pp 431 459