• 연구논문집
• /
• s.29
• /
• pp.151-162
• /
• 1999

In general, manufacturing processes of thermosetting composites consist of mold filling and resin cure. The important parameters used in modeling and designing mold filling are the permeability of the fibrous preform and the viscosity of the resin. To consolidate a composite, resin cure or chemical reaction plays an essential role. Cure kinetics. Therefore, is necessary to quantify the extent of chemical reaction or degree of cure. It is also important to predict resin viscosity which can change due to chemical reaction during mold filling. There exists a heat transfer between the mold and the composite during mold filling and resin cure. Cure kinetics is also used to predict a temperature profile inside composite. In this study, a new scheme which can determine cure kinetics from dynamic temperature scaning was proposed. The method was applied to epoxy resin system and was verified by comparing measurements and predictions.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.233-236
• /
• 2006

A dilatometer was used to investigate the effect of cure conditions and the presence of filler in an epoxy system. These studies showed shrinkage in the cured epoxy when heating it through the glass transition temperature region. The magnitude of the shrinkage, related to stress build up in the epoxy during curing, was influenced by the processing conditions, filler presence and the nature of the mold used to contain the resin. Cure and cyclic cure at a lower temperature, prior to a post cure, decreased the magnitude of observed shrinkage. Cure shrinkage decreased with number of cyclic cure. Post cured samples outside the mold led to less shrinkage compared with sample in the mold. And sample containing kaolin filler showed less shrinkage than unfilled sample.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.1-5
• /
• 2009

A dilatometer was used to investigate the effect of cure conditions, mold types and the presence of filler in an epoxy system. These studies showed shrinkage in the cured epoxy when heating it through the glass transition temperature region. The magnitude of the shrinkage, related to stress build up in the epoxy during curing, was influenced by the processing conditions, filler presence and the nature of the mold used to contain the resin. Cure and cyclic cure at a lower temperature, prior to a post cure, decreased the magnitude of observed shrinkage. Cure shrinkage decreased with the number of cyclic cures. Post cured samples outside the mold led to less shrinkage compared with samples in the mold. Sample cured in a silicon mold represented less shrinkage than sample cured in an aluminum mold. Sample containing kaolin filler showed less shrinkage than unfilled sample.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.53-58
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it requires a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis considering the exothermic reaction. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.244-250
• /
• 1997

본 연구에서는 에폭시/산무수물계에 경화촉진제를 첨가한 시료를 몰드(mold)내에서 등온 경화시킬 때 시료 내부의 온도변화를 측정하여 얻어진 온도-시간 곡선(temperature-time profile)을 조사하였다. 실험에 사용한 경화촉진제의 종류는 1-cyanoethy1-2-ethy1-4-methy1 imidazole(1E4MZ-CN), N,N-dimethy1 benzy1 amine(BDMA), 2,4,6-tris(dimethy1-aminomethy1)-phenol(DMP-30)이며 그들의 농도(c)는 1.0,1.5,2.0,2.5,phr그리고 경화온도(T$_{cure}$ )는 65,70,85,95$^{\circ}C$로 하였다. 경화가 진행되는 동안 시료내부의 온도는 초기에 경화온도로 상승한 후 본격적인 경화 반응이 일어나기 시작하여 온도가 급격히 상승하였다가 다시 감소하는 양상을 보였다. 온도-시간 곡선상에 나타나는 온도가 최고로 상승되는 시점(t$_{peak}$ )과 그 때의 온도(T$_{peak}$ )는 촉진제의 종류와 농도 그리고 경화온도에 의하여 영향을 받았다. 사용한 경화촉진제중에 DMP-30이 가장 짧은 t$^{peak}$ 값을 가져 가장 우수한 촉진 효과를 갖는 것으로 나타났으며, T$_{peak}$ 는 촉진제의 농도와 경화온도가 증가할수록 상승하였다. 그리고 경화촉진제의 농도와 경화온도의 변화에 따른 t$_{peak}$ 과 T$_{peak}$ 의 변화를 보면 촉진제 농도와 경화온도가 낮을 때 그 변화가 민감하여 2E4MZ-CN 이 가장 민감한 촉진제로 나타났으며 또한 T$_{peak}$ 에 영향을 주는 여러가지 요소들을 본 연구에서 얻어진 결과로부터 자세히 살펴보았다.

• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.303-310
• /
• 2009

The purpose of this study was to evaluated for its validity and assessment of oral health impact profile 14 as a tool for evaluating of life related with oral health status for the ADL inpatients in geriatrics hospital and as a basic data for establishing geriatric oral health policies. The sample of this study consisted of 120 in ADL inpatients in geriatrics hospital in Pusan and Ulsan city, through face-to-face interviews of sample extraction method. In conclusion, the analysis results of the short OHIP14 forms have an effect on necessity of cure, filled teeth and current oral stale, spouse, intension. Through this results, OHIP14 could be used as an indicator to measure the quality of life related with oral health status for the ADL inpatients in geriatrics hospital as well as elderly general people.

• Korean Journal of Pharmacognosy
• /
• v.12 no.3
• /
• pp.119-124
• /
• 1981

In our country, in order to cure diseases, a large number of crude drug preparations has been available. Nevertheless, the development of crude drug preparations have been inhibited, because the quality control is not completed so far. Therefore, we have eontinued on studing the quality control method by Zig-zag TLC. profile analysis. The water extract of 'Samyo-Tang' and componental crude drug (Glycyrrhizae Radix, Ephedrae Herba, Armenicae Semen) were developed on Silica gel $60F_{254}\;plate\;(E.\;Merck)$ useing elution solvent. The developed plate were examined useing Dual Wavelength Zig-zag Scanner (Shimadzu). According to the results of the experiment, it could be summarized as follow: 1) Original patterns of TLC profiles of 'Samyo-Tang' componental crude drug and mixing two crude drugs of 'Samyo-Tang' were observed. 2) Original patterns TLC profile of each extract after spraying with 2% ninhydrine were observed. 3) In the extract of addition and subtraction of Ephedrae Herba, peak area of Rf 0.48 and Rf 0.60 were varied quantitatively.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.159-162
• /
• 2004

The processing of phenolic composite reinforced with hybrid of PAN based/Rayon based carbon fabrics using FBG sensor and thermocouple was studied. Once the composite is cured, the reflection spectrum from the FBG sensor shifted the center wavelength with an increase in the temperature. Also, the change in the form of the reflection spectrum obtained during the cooling process of the cure cycle was caused by the thermal shrinkage. During the curing process, uniform distribution of the temperature profile was observed throughout the sample.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.115-121
• /
• 2011

hFSH is a glycoprotein secreted from anterior pituitary and consists of ${\alpha}$ and ${\beta}$ subunits. Because of its major biological functions including sperm formation in the male and for follicular growth, FSH is used to cure woman's sterility. In this study we tried to produce recombinant hFSH in vitro using a retrovirus expression vector. Two major components of the vector we constructed are: ( i ) a DNA fragment containing ${\alpha}$ and ${\beta}$ genes fused by a DNA sequence coding carboxyl terminal peptide (CTP) of human chorionic gonadotropin, (ii) a DNA fragment corresponding woodchuck hepatitis virus posttranscriptional regulatory element (WPRE). Evaluation of expression profile of the recombinant FSH using reverse transcription PCR and enzyme-linked immunosorbent assay (ELISA). Among three cell lines tested, HeLa cells were the best for hFSH expression (5,395 mIU/ml), then followed by chicken embryonic fibroblast (CEF) cells and Chinese hamster ovary (CHO) cells in the order of hFSH production. In addition to the amount, the FSH produced from HeLa cells was highest in terms of biological activity which was determined by measuring cAMP.