Journal of Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회논문집)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지

Evaluation of Partial Safety Factors on Sliding of Monolithic Vertical Caisson of Composite Breakwaters

혼성제 직립 케이슨의 활동에 대한 부분안전계수 산정

  • Lee, Cheol-Eung (Department of Civil Engineering, Kangwon National University) ;
  • Park, Dong-Heon (Department of Civil Engineering, Kangwon National University) ;
  • Kwon, Hyuk-Jae (Department of Civil Engineering, Kangwon National University) ;
  • Lee, Sun-Yong (Sekwang Engineering Consultants Co. Ltd.)
  • Published : 2009.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Partial safety factors of the load, resistance, and reliability function are evaluated according to the target probability of failure on sliding mode of monolithical vertical caisson of composite breakwaters. After reliability function is formulated for sliding failure mode of caisson of composite breakwaters regarding bias of wave force, uncertainties of random variables related to loads, strengths are analyzed. Reliability analysis for the various conditions of water depth, geometric, and wave conditions is performed using Level II AFDA model for the sliding failure. Furthermore, the reliability model is also applied to the real caisson of composite breakwaters of Daesan, Dong- hae, and Pohang harbor. By comparing the required width of caisson of composite breakwater according to target probability of failure with the other results, the partial safety factors evaluated in this study are calibrated straightforwardly. Even though showing a little difference on the 1% of target probability, it may be found that the present results agree well with the other results in every other target probability of failure.

혼성제 케이슨의 활동파괴모드에 대한 목표파괴수준에 따른 저항 및 하중 그리고 신뢰함수의 부분안 전계수를 산정하였다. 이를 위해 파력의 편이를 고려한 혼성제 케이슨의 활동파괴모드에 대한 신뢰함수를 수립하 고, 관련 확률변수의 불확실성에 대해 분석하였다. Level II AFDA 해석법을 이용하여 여러 수심조건 및 단면조건 그리고 파랑조건에 대해 신뢰성 해석을 수행하였다. 특히 대산항, 동해항 그리고 포항항의 실제 혼성제 케이슨의 활동파괴에 대한 신뢰성 해석도 수행하였다. 마지막으로 목표수준에 따른 혼성제 케이슨의 최소 소요 폭을산정하는 방법으로 본 연구에서 산정된 부분안전계수에 대한 비교 평가를 실시하였다. 비교 결과, 목표수준 1%에서는 약간의 차이를 보이고 있으나 다른 모든 수준에서는 비교적 잘 일치하고 있다.

Keywords

References

  1. 이철응, 2002. 혼성제 직립 케이슨의 활동에 대한 파괴확률, 한국해안.해양공학회지, 제 14권 제 2호, 한국해안.해양공학회, pp.95-107
  2. 이철응, 2007. 피복재의 부분안전계수 산정, 한국해안해양공학회지, 제 19권 제 4호, 한국해안.해양공학회, pp.336-344
  3. 이철응, 2008. 처오름에 대한 신뢰성 해석 및 부분안전계수산정, 한국해안.해양공학회지, 제 20권 제 4호, 한국해안.해양공학회, pp.355-362
  4. 해운항만청, 1988, 전국 항만 설계파 추산 보고서
  5. 해양수산부, 2000. 대산항(1단계) 실시설계 보고서
  6. Bruining, H.F., 1994. Wave forces on vertical breakwaters:Reliability of design formula, Delft Hydraulics Rep. H 1903, MAST II
  7. Burcharth, H.F., Sorensen, D., and Christiani, E., 1994. On the evaluation of failure probability of monolithic vertical wall breakwaters, Wave Barriers in deepwaters, pp. 458-469
  8. Burcharth, H.F., and Sorensen, D., 1998. Design of vertical wall caisson breakwaters using partial safety factor, Proc. 26th. Int. Coast. Engrg. Conf., ASCE, pp. 2138-2151
  9. CEM(Coastal Engineering Manual), 2006. Coastal Engineering Research Center, US Army Corps Engineers, Washington, DC
  10. Christensen, P.T., and Baker, M.J., 1982. Structural reliability theory and its applications, Springer-Verlag, New York
  11. Christiani, E., Burcharth, H.F., and Sorensen, D., 1996. Reliability based optimal design of vertical breakwaters modelled as a series system of failure, Proc. 25th. Int. Coast. Engrg. Conf., ASCE, pp. 1598-1602
  12. Goda, Y., 2000. Random seas and design of maritime structures, Univ. of Tokyo Press, Tokyo
  13. Kawai, H., Takayama, T., Suzuki, Y., and Hiraishi, T., 1997. Failure probability of breakwater caisson for tidal level variation, Rep. of the Port and Hab. Res. Inst., 36(4), pp. 4-41. (in japanese)
  14. Kortenhaus, A., and Oumeraci, H., 1998. Classification of wave loading on monolithic coastal structures, Proc. 26th. Int. Coast. Engrg. Conf., ASCE, pp. 867-880
  15. Kortenhaus, A., and Oumeraci, H., 2000. Damping of horizontal and uplift foces on horizontally composite breakwaters, Proc. 27th. Int. Coast. Engrg. Conf., ASCE, pp. 1724-1737
  16. Lee, C.-E., and Kwon, H. J., 2009. Reliability analysis and evaluation of partial safety factors and for random wave overtopping, KSCE Journal of Civil Engrg. KSCE, 13(1), pp.7-14 https://doi.org/10.1007/s12205-009-0007-x
  17. McKenna, J., and Allsop, W., 1998. Statistical distribution of horizontal wave forces on vertical breakwaters, Proc. 26th. Int. Coast. Engrg. Conf., ASCE, pp. 2082-2095
  18. Nagao, T., Kadowaki, Y., and Terauchi, K., 1995. Evaluation of safety of breakwaters by the reliability based design method(1st report: Study on the safety against sliding), Rep. of the Port and Hab. Res. Inst., 34(5), pp. 40-70. (in japanese)
  19. Nagao, T., Kadowaki, Y., Tsuchida, T., and Terauchi, K., 1997. Evaluation of safety of breakwaters by the reliability based design method(2nd report: Study on the safety against foundation failure), Rep. of the Port and Hab. Res. Inst., 36(5), pp. 26-56. (in japanese)
  20. Nagao, T., Okubo, N., Kawasaki, S., and Hayashi, Y., 1998. Evaluation of safety of breakwaters by the reliability based design method(3rd report: Concluding the applicability of reliability based design method), Rep. of the Port and Hab. Res. Inst., 37(2), pp. 132-176(in japanese)
  21. Oumeraci, H., Kortenhaus, A., Allsop, N.W.H., de Groot, M.B., Crouch, R.S., and Vrijling, J.K., 2000. Probabilistic design of caisson breakwaters and sea walls - Present statues and perspectives, Proc. 27th. Int. Coast. Engrg. Conf., ASCE, pp. 1664-1677
  22. Shimosako, K., and Takahashi, S., 1998. Reliability design method of composite breakwater using expected sliding distance, Rep. of the Port and Hab. Res. Inst., 37(1), pp. 4-30(in japanese)
  23. Shimosako, K. and Takahashi, S., 2000. Application of expected sliding distance method for composite breakwaters design, Proc. 27th. Int. Coast. Engrg. Conf., ASCE, pp. 1885-1898
  24. Takahashi, S., 1997. Breakwater design, Handbook of port and harbor engineering, by Tsinker ed., Chapman and Hallm N.Y., pp.951-1043
  25. Takahashi, S., Shimosako, K., Kimura, K., and Suzuki, K., 2000. Typical failures of composite breakwaters in japan, Proc. 27th. Int. Coast. Engrg. Conf., ASCE, pp. 1899-1910
  26. Takayama, T., Ikesue, S.-I., and Shimosako, K., 2000. Effect of directional distribution of extreme waves on composite breakwater reliability in sliding failure, Proc. 27th. Int. Coast. Engrg. Conf., ASCE, pp. 1738-1750
  27. Takayama, T., and Ikeda, N., 1992. Estimation of sliding failure probability of present breakwaters for probabilistic design, Rep. of the Port and Hab. Res. Inst., 31(5), pp. 3-32
  28. Yamamoto, M., Mizumura, K., Endo, T., and Shiraishi, N., 1990. Reliability analysis of composite breakwaters protected with armor blocks, Proc. 22nd. Int. Coast. Engrg. Conf., ASCE, pp. 1403-1416
  29. Van der Meer, J., d'Angremond, K., and Juhl, J., 1994. Probabilistic calculations of wave forces on vertical structures, Proc. 24th. Int. Coast. Engrg. Conf., ASCE, pp. 1899-1910