Abstract
In this study, the substitution fumigation gases (15% Ethylene Oxide + 85% HFC 134a, 20% Ethylene Oxide + 80% $CO_2$, 99% Sulfuryl Fluoride + 1% Inert Gas) were applied on the metal, pigment, fabric and paper specimen. The result of the fumigation treatment with 15% Ethylene Oxide + 85% HFC 134a (200g/$m^3$, 48hours) is the color changes (${\Delta}E$) of 1st and 2nd Cu specimens showed significant difference as 3.40, 4.17. On the other hand, other specimens except for Cu showed less than 3.0 in chrominance values. The result with 20% Ethylene Oxide + 80% $CO_2$ (150g/$m^3$, 48hours) is that the color changes (${\Delta}E$) of 1st and 2nd specimens were overall less than 3.0 so that color differences were subtle and hardly recognized with naked eyes. So it is proved that the fumigation treatment with Ethylene Oxide 20% + $CO_2$ 80% is relatively stable on materials in this study. In the case of 99% Sulfuryl Fluoride + 1% Inert Gas (50g/$m^3$, 48hours), the color difference of Lead red ($PbO_4$) of pigment was more than 3.0 that was compared with contrast specimens. But chrominance values in the other specimens were less than 3.0 on average.
본 연구에서는 Methyl Bromide를 대체할 15% Ethylene Oxide + 85% HFC 134a, 20% Ethylene Oxide + 80% $CO_2$, 99% Sulfuryl Fluoride + 1% Inert Gas를 이용하여 훈증처리 시, 금속, 안료, 섬유 및 지류시편에 미치는 영향을 관찰한 실험이다. 15% Ethylene Oxide + 85% HFC 134a을 200g/$m^3$, 48시간 훈증 처리 한 결과 Cu 시편은 1차 및 2차 훈증처리 실험 모두 육안으로 식별할 수 있는 평균 3.40, 4.17의 색차값을 나타났다. 그 외의 시편에서는 색차값이 3.0 미만으로 나타났다. 20% Ethylene Oxide + 80% $CO_2$을 150g/$m^3$, 48시간 처리한 1, 2차 훈증처리 모두 전체적으로 실험군의 색차값이 평균 3.0 미만으로 나타났으며 이는 육안으로 식별할 수 없는 미미한 색차이다. 이에 따라 이 연구에 사용된 재질에 비교적 안정적이라고 판단된다. 99% Sulfuryl Fluoride + 1% Inert Gas로 50g/$m^3$, 48시간 처리한 결과, 안료 중 장단 시편은 1, 2차 훈증처리 시 대조군의 색차값과 비교하여 보았을 때 3.0이상 색차값의 변화가 나타났다. 그 외의 시편에서는 색차값이 평균 3.0 미만으로 나타났다.