DOI QR코드

DOI QR Code

Evaluation of seismic energy demand and its application on design of buckling-restrained braced frames

  • Choi, Hyunhoon (Department of Architectural Engineering, Sungkyunkwan University) ;
  • Kim, Jinkoo (Department of Architectural Engineering, Sungkyunkwan University)
  • 투고 : 2008.04.01
  • 심사 : 2008.11.17
  • 발행 : 2009.01.10

초록

In this study seismic analyses of steel structures were carried out to examine the effect of ground motion characteristics and structural properties on energy demands using 100 earthquake ground motions recorded in different soil conditions, and the results were compared with those of previous works. Analysis results show that ductility ratios and the site conditions have significant influence on input energy. The ratio of hysteretic to input energy is considerably influenced by the ductility ratio and the strong motion duration. It is also observed that as the predominant periods of the input energy spectra are significantly larger than those of acceleration response spectra used in the strength design, the strength demand on a structure designed based on energy should be checked especially in short period structures. For that reason framed structures with buckling-restrained-braces (BRBs) were designed in such a way that all the input energy was dissipated by the hysteretic energy of the BRBs, and the results were compared with those designed by conventional strength-based design procedure.

키워드

참고문헌

  1. AISC (1999), Load and Resistance Factor Design Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL
  2. AISC (2002), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL
  3. Akbas, B. (2006), 'A neural network model to assess the hysteretic energy demand in steel moment resisting frames', Struct. Eng. Mech., 23(2), 177-193 https://doi.org/10.12989/sem.2006.23.2.177
  4. Akbas, B., Shen, J. and Hao, H. (2001), 'Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective', Struct. Des. Tall Build., 10(3), 193-217 https://doi.org/10.1002/tal.172
  5. Akiyama, H. (1985), Earthquake-resistant Limit-state Design for Buildings, University of Tokyo Press, Japan
  6. Arias, A. (1970), 'A measure of earthquake intensity', in Seismic Design for Nuclear Power Plants, ed. R.J Hansen, Massachusetts Institute of Technology Press, 438-469
  7. Black, C., Makris, N. and Aiken, I. (2002), 'Component testing, stability analysis and characterization of buckling restrained braces', PEER Report 2002/08, Pacific Earthquake Engineering Research Center, University of California, Berkeley
  8. Bojorquez, E. and Ruiz, S.E. (2004), 'Strength reduction factors for the Valley of Mexico, considering low-cycle fatigue effects', 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper No. 516
  9. Bruneau, M. and Wang, N. (1996), 'Some aspects of energy methods for the inelastic seismic response of ductile SDOF structures', Eng. Struct., 18(1), 1-12 https://doi.org/10.1016/0141-0296(95)00099-X
  10. Building Seismic Safety Council (2004), 'NEHRP Recommended provisions for seismic regulations for new buildings and other structures, 2003 Edition, Part 1: Provisions', Report No. FEMA-450, Federal Emergency Management Agency, Washington, D.C
  11. Choi, H. and Kim, J. (2006a), 'Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum', Eng. Struct., 28(2), 304-311 https://doi.org/10.1016/j.engstruct.2005.08.008
  12. Choi, H., Kim, J. and Chung, L. (2006b), 'Seismic design of buckling-restrained braced frames based on a modified energy-balance concept', Can. J. Civil Eng., 33(10), 1251-1260 https://doi.org/10.1139/l06-068
  13. Chopra, A.K. (1995), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall Inc., New Jersey
  14. Cruz, M.F. and Lopez, O.A. (2000), 'Plastic energy dissipated during an earthquake as a function of structural properties and ground motion characteristics', Eng. Struct., 22(7), 784-792 https://doi.org/10.1016/S0141-0296(98)00139-4
  15. Decanini, L.D. and Mollaioli, F. (2001), 'An energy-based methodology for the assessment of seismic demand', Soil Dyn. Earthq. Eng., 21(2), 113-137
  16. Fajfar, P. and Vidic, T. (1994), “Consistent inelastic design spectra: Hysteretic and input energy”, Earthq. Eng. Struct. Dyn., 23(5), 523-537 https://doi.org/10.1002/eqe.4290230505
  17. Housner, G.W. (1956), 'Limit design of structures to resist earthquakes', Proceedings of the First World Conference on Earthquake Engineering, Berkeley, California
  18. ICC (2006), 2006 International Building Code, International Code Council Inc., Country Club Hills, IL
  19. Khashaee, P., Mohraz, B., Sadek, F., Lew, H.S. and Gross, J.L. (2003), 'Distribution of earthquake input energy in structures', Report No. NISTIR 6903, National Institute of Standards and Technology, Washington
  20. Kim, J., Choi, H. and Chung, L. (2004), 'Energy-based seismic design of structures with buckling-restrained braces', Steel Compos. Struct., 4(6), 437-452
  21. Leelataviwat, S., Goel, S.C. and Stojadinovi, B. (2002), 'Energy-based seismic design of structures using yield mechanism and target drift', J. Struct. Eng., 128(8), 1046-1054 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
  22. Mahin, S.A. and Lin, J. (1983), 'Inelastic response spectra for single degree of freedom systems', Department of Civil Engineering, University of California, Berkeley
  23. Merritt, S., Uang, C.M. and Benzoni, G. (2003), 'Subassemblage testing of corebrace buckling-restrained braces', Report No. TR-2003/01, University of California, San Diego
  24. Nakashima, M., Saburi, K. and Tsuji, B. (1996), 'Energy input and dissipation behaviour of structures with hysteretic dampers', Earthq. Eng. Struct. Dyn., 25(5), 483-496 https://doi.org/10.1002/(SICI)1096-9845(199605)25:5<483::AID-EQE564>3.0.CO;2-K
  25. Somerville, P., Smith, H., Puriyamurthala, S. and Sun, J. (1997), 'Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project', SAC Joint Venture, SAC/BD 97/04
  26. Teran-Gilmore, A. (1996), 'Performance-based earthquake-resistant design of framed buildings using energy concept', Ph. D. Thesis, University of California at Berkeley
  27. Teran-Gilmore, A. and Jirsa, J.O. (2004), 'The use of cumulative ductility strength spectra for seismic design against low cycle fatigue', 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper No. 889
  28. Trifunac, M.D. and Brady, A.G. (1975), 'A study on the duration of strong earthquake ground motion,' B. Seismol. Soc. Am., 65(3), 581-626
  29. Tsai, K.C. and Li, J.W. (1997), 'DRAIN2D+, A general purpose computer program for static and dynamic analyses of inelastic 2D structures supplemented with a graphic processor', Report No. CEER/R86-07, National Taiwan University, Taipei, Taiwan
  30. Uang, C.M. and Bertero, V.V. (1988), 'Use of energy as a design criterion in earthquake-resistant design', Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California at Berkeley
  31. Zahrah, T. and Hall, J. (1984), 'Earthquake energy absorption in SDOF structures', J. Struct. Eng., 110(8), 1757-1772 https://doi.org/10.1061/(ASCE)0733-9445(1984)110:8(1757)

피인용 문헌

  1. Energy-based damage-control design of steel frames with steel slit walls vol.52, pp.6, 2014, https://doi.org/10.12989/sem.2014.52.6.1157
  2. Experimental and analytical studies on Buckling-Restrained Knee Bracing systems with channel sections vol.12, pp.1, 2012, https://doi.org/10.1007/s13296-012-1009-Y
  3. Comparative seismic performance of steel frames retrofitted with buckling-restrained braces through the application of Force-Based and Displacement-Based approaches vol.31, pp.3, 2011, https://doi.org/10.1016/j.soildyn.2010.11.003
  4. Demands and distribution of hysteretic energy in moment resistant self-centering steel frames vol.20, pp.5, 2016, https://doi.org/10.12989/scs.2016.20.5.1155
  5. Energy-based seismic performance of reinforced concrete frame structures vol.65, pp.8, 2013, https://doi.org/10.1680/macr.12.00149
  6. Seismic behavior factors of buckling-restrained braced frames vol.33, pp.3, 2009, https://doi.org/10.12989/sem.2009.33.3.261
  7. Parametric study on energy demands for steel special concentrically braced frames vol.24, pp.2, 2009, https://doi.org/10.12989/scs.2017.24.2.265
  8. Energy based design of a novel timber-steel building vol.15, pp.4, 2009, https://doi.org/10.12989/eas.2018.15.4.351
  9. Energy-Based Seismic Design Method for EBFs Based on Hysteretic Energy Spectra and Accumulated Ductility Ratio Spectra vol.2019, pp.None, 2009, https://doi.org/10.1155/2019/3180596
  10. Expected damage for SDOF systems in soft soil sites: an energy-based approach vol.17, pp.6, 2019, https://doi.org/10.12989/eas.2019.17.6.577
  11. An energy-based approach to determine the yield force coefficient of RC frame structures vol.21, pp.1, 2009, https://doi.org/10.12989/eas.2021.21.1.037
  12. Feasibility study of buckling-restrained braces with PM-35 steel core vol.79, pp.2, 2021, https://doi.org/10.12989/sem.2021.79.2.199
  13. Derivation of yield force coefficient for RC frames considering energy balance and P-delta effects vol.79, pp.4, 2009, https://doi.org/10.12989/sem.2021.79.4.429
  14. Cumulative Structural Damage Due to Low Cycle Fatigue: An Energy-Based Approximation vol.25, pp.12, 2021, https://doi.org/10.1080/13632469.2019.1692736