The Characteristics of Sediment and a Design Method for Preventing Sediment in the beginning Lateral Sewer

단말 오수관거 에서의 퇴적특성과 퇴적방지를 위한 설계법 고찰

  • 황환국 (한국건설기술연구원 건설환경연구실) ;
  • 김영진 (한국토지주택공사 토지주택연구원) ;
  • 한상종 (한국건설기술연구원 건설환경연구실) ;
  • 정호찬 (한국건설기술연구원 건설환경연구실)
  • Received : 2009.03.18
  • Accepted : 2009.12.08
  • Published : 2009.12.15

Abstract

The flow in the beginning lateral sewer can be characterized as intermittent and unsteady, and a moment maximum flow energy is required to transport fecal solids in the sewer. It is thus difficult to design to satisfy a minimum velocity criteria (0.6m/s), because of the substantially lower discharge in the beginning lateral sewer. This study is the result of a field survey, and aims to determine a design criteria for the minimum slope to prevent sediment in a lateral sewer. The survey performed on the two flat small catchments in Goyang-si consisting of D400mm hume-pipe, aimed to understand the manner in which the scope of a sewer slope has an effect on sediment in the beginning lateral sewer. The survey showed that the sewer slope below 3‰ had sedimentation of 88.7%, while the sewer slope of 3~6‰ had sedimentation of 47.8%. In addition, the minimum design slope was estimated to refer to the result of hydraulic experiments from Public Works Research Institute in Japan. Analysis showed that the D400mm hume pipe should be installed with a slope of 6.5‰ to prevent sediment in the beginning lateral sewer. For future installations, the study results showed that a D300mm plastic pipe requires a minimum slope of 3.5‰, and a D250mm plastic pipe requires a minimum slope of 3.3‰ in the beginning lateral sewer.

Keywords

Acknowledgement

Supported by : 한국토지공사

References

  1. 한국토지공사(2008), 하수관 최적설계를 위한 조사 분석 연구, pp.288-301
  2. 황환국.정호찬.김영진.이정민 (2008), '초기 오수관에서 고형물의 원활한 이송을 위한 최소 경사 분석', 한국물환경학회.대한상하수도학회 공동 춘계학술발표회 논문집, pp. 541-542
  3. 日本建設省土木硏究所(2008), 초기관에서 최소경사 추정을 위한 질의답변자료
  4. 日本下水道協會(1984), 小規模下水道計劃指針(案), pp.52-56
  5. 田中修司(2000), 下水道管渠學, pp.82-84, 環境新聞社
  6. 吉本國春(1985), 汚水管の最小流速に關する2,3の考察,日本下 水道協會紙, 22(11), pp. 57-67
  7. 吉本國春(1989),マニングの粗度係數に關する2,3の考察, 日本下水道協會紙, 26(3), pp. 37-44
  8. ASCE & WEF(2007), Gravity Sanitary Sewer Design and Construction, 2nd Edition, pp.134-141
  9. BS EN 752-4(1998),Drain and sewer systems outside buildings (Part 4: Hydraulic design and environmental considerations), pp.25-26