참고문헌
- Kim, Y. C., Nishio, S. and Ohkubo, H., 1994, "Spray Cooling with Formation of Liquid Film Flow : Distribution of Heat Transfer Coefficient in High Temperature Region," Trans. of the JSME(B), Vol. 60-574, pp. 2158-2164
- Kim, Y. C. and Yun, S. M., 2006, "Study on Film Boiling Heat Transfer of Spray Cooling in Air-Water Full Cone Spray System," Trans. of the KSME(B), Vol. 30-12, pp. 1236-1242 https://doi.org/10.3795/KSME-B.2006.30.12.1236
- Nishio, S. and Kim, Y. C., 1998, "Heat Transfer of Dilute Spray Impinging on Hot Surface," Int. J. of Heat & Mass Transfer, Vol. 41, pp. 4113-4119 https://doi.org/10.1016/S0017-9310(98)00150-1
- Kim, Y. C. , 2005, "Film Boiling Heat Transfer Model of Spray Cooling Focusing on Rebound Motion of Droplets," Trans. of the KSME(B), Vol. 29-2, pp. 287-293 https://doi.org/10.3795/KSME-B.2005.29.2.287
- Kim, Y. C. and Yun, S. M., 2006, "Study on Correlation of Droplet Flow rate and Film Boiling Heat Transfer in Spray Cooling," Trans of the KSME(B), Vol. 31-4, pp. 335-340 https://doi.org/10.3795/KSME-B.2007.31.4.335
- Wadsworth, D. C. and Mudawar, I., 1990 "Cooling of Multi-chip Electronic Module by Means of Confined Two-Dimensional Jets of Dielectric Liquid," ASME J. of Heat Transfer, Vol. 112, pp. 891-898 https://doi.org/10.1115/1.2910496
- Willingham, T. C. and Mudawar, I., 1992, "Forced Convective Boiling and Critical Heat Flux From a Linear Array of Discrete Heat Source," Int. J. of Heat & Mass Transfer, Vol. 35-11, pp. 2879-2890 https://doi.org/10.1016/0017-9310(92)90308-F
- Womac, D. J., Ramadhyani, S. and Incropera, F. P., 1993, "Correlating Equation for Impingement Cooling of Small Heat Source With Single Circular Liquid Jets," ASME J. of Heat Transfer, Vol. 115, pp. 106-115 https://doi.org/10.1115/1.2910635
- Honda, H., Takamastu, H. and Wei, J. J., 2002, "Enhanced Boiling of FC-72 on Silicon Chips With Micro-Pin-Fins and Submicron-Scale Roughness," ASME J. of Heat Transfer, Vol. 124, pp. 383-390 https://doi.org/10.1115/1.1447937
- Qu, W. and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sink," Int. J. of Heat & Mass Transfer, Vol. 46, pp. 2755-771 https://doi.org/10.1016/S0017-9310(03)00041-3
- Ohkubo, H. and Nishio, S., 1989, "Study on Accurate Prediction of Characteristics of Mist Cooling (1st Report : Effect of Surface Roughness)," Trans. of the JSME(B), Vol. 54-500, pp. 934-937
- Estes, K. A. and Mudawar, I., 1995, "Correlation of Sauter Mean Diameter and Critical Heat Flux for Spray Cooling of Small Surfaces," Int. J. of Heat & Mass Transfer, Vol. 38-16, pp. 2985-2996 https://doi.org/10.1016/0017-9310(95)00046-C
- Kim, Y. C. 2007, "Study on Boiling Heat Transfer of FC-77 in Spray Cooling," Journal of ILASS-KOREA, Vol. 12-4, pp. 179-184
- Mudawar, I. and Valentine, W. S., 1989, "Determination of the Local Quench Curve for Spray-cooled metallic Surfaces," J. Heat Treating, Vol. 7, pp. 107-121 https://doi.org/10.1007/BF02833195