초록
항공기 제작 시 중요한 요소는 항공기 구조의 안전성과 경량화라 할 수 있다. 자긴가공 공정을 통하여 고압의 항공기 부품을 신뢰성 증대와 함께 재료의 경량화도 같이 얻을 수 있다. 이 방법은 주로 단일 실린더에 적용되었다. 그러나 바우싱거 효과에 의하여 자긴가공의 유용함이 줄어든다. 바우싱거 효과를 줄이기 위한 억지 끼워맞춤과 자긴가공을 이용한 복합실린더에 대한 관심이 증대하고 있다. 본 연구에서 동일한 치수를 가진 단일 및 복합실린더를 고려하였다. 복합실린더에서 억지 끼워맞춤에 의하여 경계면에서 낮은 압축 잔류응력이 유도되며, 내경에서 보다 낮은 소성 변형률이 유도된다. 이는 바우싱거 효과를 줄여, 내경에서 더욱 유용한 잔류응력을 얻을 수 있음을 의미한다.
In manufacturing aircraft, safety and lightness of structure are important factors. Utilizing autofrettage technique, these benefits can be obtained. This technique is most frequently applied to a single cylinder. However, the Bauschinger effect reduces the benefits of autofrettage process Therefore, there is increasing interest in the use of compound cylinder that combine shrink fit and autofrettage. In this paper, single and compound cylinders that has same geometry were considered. It was found that compound cylinder which was autofrettaged has lower tangential hoop stress and plastic strain than single cylinder at bore. This means a reduction in the impact of the Bauschinger effect after shrink-fitting which produces the beneficial bore hoop stress.