DOI QR코드

DOI QR Code

EBSD 기법을 이용한 Gamma TiAl의 마이크로 조직파괴에 관한 연구

A Study on Gamma TiAl Micro-structural Fracture with EBSD Technique

  • 김윤해 (한국해양대학교 기계소재공학부) ;
  • 우병훈 (한국해양대학교 대학원 재료공학과) ;
  • 배창원 (한국해양수산연수원) ;
  • 배성열 (한국해양대학교 대학원 재료공학과) ;
  • ;
  • 문경만 (한국해양대학교 기계소재공학부)
  • 발행 : 2007.05.31

초록

A backscatter Kikuchi diffraction attachment to an SEM enables the convenient investigation of grain orientations on bulk or micro surface. Their relation to micro structural features gives insight into many aspects of anisotropic materials properties. In micro area such as Micro Electro Mechanical Systems(MEMS) devices is required in order to improve understanding of how they may be expected to perform upon the micro scale. Electro Back Scatter Diffraction (EBSD) helps us to find uniform area as MEMS material. The ${\gamma}-TiAl$ has two different lamellar structures ${\gamma}/{\alpha}2-Ti_3Al$ phase which have shows $\{111\}{\gamma}//\{0001\}{\alpha}2$ plane indexing. The micro size testing specimen was successfully made by this structural relation. Interlamellar structure specimen averagely show $20{\sim}25%$ lower fracture toughness value compare with translamellar specimens Moreover micro fracture surface and micro crack progress were observed.

키워드

참고문헌

  1. 윤준보, 조일주, 최윤석, 알기 쉽고 재미있는 MEMS 이야기, 2004
  2. S. Hata, K. Sato, and A. Shimokobe :proc. Part of the Conference on Device and Process Technology for MEMS and Microelectronics pp.97‐108 (1999)
  3. P.A.McQuay. Cast Gamma TiAl Alloys: Are We There Yet? in Proceedings of Third International Symposium on Structural Intermetallics (ISSI 3), Structural Intermetallics 2001, TMS, Warrendale, USA. 2001
  4. E.A.Loria, Quo Vadis Titanium Aluminide. Intermetallics, pp. 997-1001, 2001. 9
  5. Jean Benoit, Micro and Nanotechnologies: a Challenge on the Way Forward to New Markets Materials Science & Engineering ,pp,254‐257, 1998
  6. K.T.Venkateswara‐Rao, et al., Fatigue Crack Growth and Fracture Resistance of a Two‐phase (${\gamma}+{\alpha}_2$)TiAl Alloy in Duplex and Lamellar Microstructures. Materials Science and Engineering .A 192/193,pp.474‐482, 1995
  7. T.P.Halford, K.Takashima, Y.Higo &P.Bowen, The Fracture Toughness Properties of Micro Sized High Strength ${\gamma}$ -TiAl ATEM03, JSME‐MMD 2003
  8. Robert A. Schwarzer, Automated Crystal Lattice Orientation Mapping Using a Computer‐controlled SEM, 1997
  9. ASTM, Standard E 399: Standard Test Method for Plane‐strain Fracture Toughness Testing of Metallic Materials. Annual Book of ASTM Standards, pp. 443‐473, 1997
  10. M. Yamaguchi and H. Inui, Structural Intermetallics(edited by R. Darolia, J. J. Lewandowski, C. T. Liu, P. L. Maracle and M. V.nathal), TMS, Warrendale, Pa, pp,127, 1993
  11. T.P.Halford, 'Fatique and Fracture of a High Strength, Fully Lamellar ${\gamma}$ - TiAl based Alloy', PhD Thesis, The University of Birmingham, 2003
  12. 材料の強度と破壊の基礎, 村上理一, 金允海, 楠川量啓, 西日本法規出版