대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제29권7호
  • /
  • Pages.921-929
  • /
  • 2005
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

텅스텐 백열전구의 필라멘트 단선에 대한 가속수명시험

An Accelerated Life Test for Burnout of Tungsten Filament of Incandescent Lamp

  • 김진우 (대우일렉트로닉스(주) 품질신뢰성 연구소) ;
  • 신재철 (대우일렉트로닉스(주) 품질신뢰성 연구소) ;
  • 김명수 (수원대학교 산업정보공학과) ;
  • 이재국 (대우일렉트로닉스(주) 품질신뢰성 연구소)
  • 발행 : 2005.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot spots in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

키워드

참고문헌

  1. Evans, J. W. and Evans, J. Y., 1997, Microsystem technologies, Springer Verlag, pp. 145-154
  2. Burkhanov, G. S. et. aI., 1984, 'Dependence of the Burning Time of a Tungsten Lamp Filament on Its Structure,' Constr Cost Control Russian Metallurgy, 35(1), pp. 170-173
  3. Covington, E. J., 1973, 'Hot Spot Burnout of Tungsten Filaments,' Journal of IES, JULY, pp. 372-380
  4. Raj, R. and King, G. W., 1978, 'Life Prediction of Tungsten Filaments in Incandescent Lamps,' Metallurgical Transactions A, 9A, pp. 941-946
  5. Horacsek, O., 1980, 'Poperties and Failure Modes of Incandescent Tungsten Filaments,' lEE PROC., 127A(3), pp. 134-141
  6. Godfrey, T. J. et aI., 1976, 'On the Nature and Distribution of Defects in Tungsten Lamp Wire,' Journal of the Less-Common Metals, 44, pp. 319-326 https://doi.org/10.1016/0022-5088(76)90147-8
  7. Horster, H. et al., 1971, 'The Burnout Mechanism of Incandescent Lamps,' Philips tech. Rev. 32(6/7/8), pp. 155-164
  8. Garbe, S. and Hanloh, S., 1983, 'Growth of Potassium-Filled Bubbles in Doped Tungsten and Its Relation to Hot Spot Development and Intergranular Fracture,' Philips Journal Res., 38, pp. 248-262
  9. Walter, J. L. et al., 1992, 'Effects of Vibration on the Grain Morphology of Some Tungsten Incandescent Lamp Filaments,' Metallurgical Transactions A, 23A, August, pp. 2259-2262
  10. Welsch, G. et. aI., 1979, 'Recovery and Recrystallization of Doped Tungsten,' Strength of Metals and Alloys, Proceedings of the 5th International Conference, pp. 1693-1698
  11. Briant, C. L. and Walter, J. L., 1989, 'Potassium Bubble Formation and Void Growth in Tungsten Rod and Wire,' High Temperature-High Pressures, 21, pp. 553-568
  12. Briant, C. L., 1993, 'Potassium Bubbles in Tungsten Wire,' Metallurgical Transactions A, 24A, pp. 1073-1084
  13. Pugh, J. W. and Lasch, W. A., 1972, 'Characterization of Potassium Bubbles in Tungsten Mill Products,' 120th TMS Annual Meeting on Recent Advances in Tungsten and tungsten alloys philosophical magazine A, Nov, 64(5), pp. 195-201