• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.18-25
• /
• 2016

The incandescent lamp is an electric light fixture with a tungsten filament heated to a high temperature, by passing an electric current through it, until it glows with visible light. The hot filament is protected from oxidation with a glass bulb that is filled with inert gas. The incandescent lamp has fire risk when combustible materials are close to its glass bulb. Because its lamp has the property which converts 90~95 percents of the electric power to heat energy. 2015 national fire statistics show that fires caused by lighting fixtures were 652 cases, and incandescent lamps(44 cases) and halogen lamps(53 cases) accounted for 15 percents in those of high heating light fixtures. Since incandescent lamp fires account for about 45 percents in the high heating light fixture, we could not overlook the fire risks by the incandescent lamp. Although many studies related with those have been conducted, incandescent lamp fires are continuously occurred. This study was carried out to study the fire risk of ignition of wood due to radiant heat of incandescent lamp. Radiant heat flux of the incandescent lamp was predicted by applying point source model, and critical distance for ignition of wood was calculated by applying integral model. The results from this study could applied to fire prevention activities related to light bulb, and it could be used in fire cause investigations related to radiant heat of incandescent lamp.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.293-299
• /
• 2002

The anchovy scoop net fishery is one of the important in the South sea and coastal of Jeju of Korea. They are using incandescent lamp as a fishing lamp at night to gather anchovy shoals in the water surface. Fishing lamp (AC 100 V 500 W$\times$2~3 or AC 100 V 1 ㎾$\times$1) was installed at 1 m ahead of the prow and 1.5 m height from the water surface. The fishing lamp let anchovy shoals rise to the water surface and are attracted to bag net. On this study, the distribution of submarine illumination of 1㎾ and 2 ㎾ incandescent lamp were analyzed and discussed to investigate the ability of fishing lamp which can gather anchovy shoals effectively. The submarine illumination of incandescent lamp showed peak in wave length 690 nm. The relationship between submarine illumination (L) and water depth (Z) of 1 ㎾ and 2 ㎾ incandescent lamp in vertical light is 1 ㎾ : L = 3851. 9 $e^{-1.4587Z}$ $R^2$=0.9952 2 ㎾ : L= 8211.9 $e^{-1.2852Z}$ $R^2$=0.9977 The submarine illumination of 2 ㎾ incandescent lamp of 0～4 m layers appeared to be 3 to 4 times higher than 1 ㎾ incandescent lamp, and in more deep layers than 6 m appeared to be equal value of each lamp. The light of incandescent lamp (1 ㎾) pass through much better into vertical direction than horizontal, and submarine illumination of 20 m layers was 1.0 l$\chi$. Therefore, fishing lamp power is thought that 1 ㎾ incandescent lamp is more efficient than 2 ㎾ to gather anchovy shoals in depth of 15~20 m to water surface.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.25-32
• /
• 2000

Motivated by the need for developing the more efficient lighting system for light culture in the greenhouses, this paper aims to predict the illumination of incandescent lamp according to various levels of lighting and various kinds of the lamp. The results obtained in this experiment are summarized as follows. 1. The general equation to predict the illumination according to the kind of incandescent lamp and the installation height was suggested as {{{{y= { a + bx+ cx^2} over { 1+dx+ex^2~ + fx^3} [lx]}}}} , where , a, b, c , d, e and of were arbitrary constants. 2. Maximum illumination of hat-covered lamp of 60 W was 1.2 -1.5 times as many as uncovered lamp. 3. Maximum illumination of yellow color painted lamp of 100 W was 1.3 times as many as unpainted lamp.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.451-456
• /
• 2008

In this paper. we experimented and analyzed about evaporation and breaking process of filament by external flames and adsorption pattern in lamp bulb of evaporated filament particle according to the set-up directions of incandescent lamps. In the results of experiments, we could know that filament evaporation behavior of incandescent lamp that is established by down direction happened most vigorously and is difference in adsorption pattern of filament particle that is vaporized according to set-up directions. Also, glass bulbs were melted and filaments were evaporated by external flames, and finally molten marks were discriminated. We expect that become important data that this study finding reveals burnout cause of incandescent lamp in scene of a fire.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.114-119
• /
• 2000

This study was carried out to obtain fundamental information of growth response of ground cover plants under artificial light quality at indoor. Aglaonema 'Silver Queen', Hedera helix L., Hoya carnosa 'Tricolor' and Saintpaulia ionantha 'Frances' were examined under a 400lux light intensity consisted of Mercury lamp, True-lite lamp, incandescent lamp, dark-room and sunlight indoor condition. A data analysis were performed by GLM, Duncan's multiple range test and mean score with SAS program. Results of experiments are as follows; 1. A plant growth status was better showed under the True-lite lamp than sunlight. 2. A Saintpaulia ionantha flower color was responded in the first place, the deep pinkish red color of Saintpaulia ionantha flower was obtained under Mercury lamp and "True-lite lamp", "sunlight", and incandescent lamp were follow. Flower numbers of Saintpaulia ionantha after 60 days tended to decrease under every artificial light quality. 3. Leaf length and leaf width were increased under True-lite lamp, but most of plants was not significantly affected by artificial light quality. 4. A stem length of Hedera helix was increased the highest rank under sunlight also, one of artificial light, the highest increase rank was showed under incandescent lamp. 5. Chlorophyll content was highly increased under Mercury lamp, but was responded poor under incandescent lamp.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.43-49
• /
• 2006

In this paper, we are studied on the temperature characteristics and fire progress of an incandescent electric lamp at 220V/100W. In the case of stationary state, the ignition possibility of the incandescent electric lamp due to the heat generation was low because the temperature was measured at $161.9^{\circ}C$ the temperature was increased at $538.1^{\circ}C$ in the airtight chamber, but it does not generated the fire because the oxygen was not exist in the airtight chamber. When the lamp is broken, the filament of lamp was melted in the air. The gas of lamp interior spurted to the weakest part by external flame. Thus, the incandescent electric lamp is high possibility of fire when oxygens from airtight space. Also, it is known that the possibility of ignition is very high if combustion materials(sawdust) exists on surrounding. These experimental results will be utilized for the data in the investigation electrical fire cause.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.129-137
• /
• 2004

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot sports in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.263-266
• /
• 1987

Generally an incandescent lamp is made in the bulb with a horizontal position filament. In this paper the position of filament was changed Into a vortical position. When the position of filament is changed into a vertical position, efficacy is increased and color rendering is somewhat improved. In this subject the heat loss by a filling gas is important. The heat loss by a filling gas was calculated theoretically. The results in an Incandescent lamp experiment can be analyzed through the heat loss by a filling gas. As a filling gas the mixture of argon and nitrogen is used. The variation of lamp characteristics by the shape of filament rill be considered. The change by filament position to a vortical position is required in the field of power consumption saving of lighting system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.32-39
• /
• 2014

In general, non-directional LED lamps including high transmittance cover are more advantageous than directional LED lamps, which are efficient enough to improve luminous efficacy and obtain certification, allowing wide manufacture, sale, and distribution. Although KS C 7651(Self-ballasted LED lamps-Safety and performance requirements) was revised in July 2013, however, many companies are having a lot of difficulties in keeping the certification and product development for the lack of the photometric analysis for non-directional LED lamps. In this paper, through the measurement of the angular distribution of luminous flux of incandescent lamp and non-directional LED lamps, we examined the reasonability of non-directional LED lamps' standards as suggested in KS C 7651. According to the results, even if non-directional LED lamps satisfy KS C 7651, when compared to an incandescent lamp, they showed less diffusive than the incandescent lamp and the distribution of the luminous flux depending on the angle fluctuated greatly even among LED lamps. Judging by the result, the current standard of the non-directional LED lamps, KS C 7651, has been comprehended that the angular distribution of the luminous flux needs to be presented after being much more thoroughly standardized.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.2
• /
• pp.117-123
• /
• 2001

Anchovy scoop nets, a kind of lift net have been used in the coastal area of Cheju and South sea of Korea. An incandescent lamp(AC 100V, 1kW) is being used as a fishing lamp for gathering anchovy. Fishing lamp was installed at 1m ahead of the prow and 1.5m higher than the water surface. The fishing lamp let fish school rise to the water surface and attract to bag net. Accordingly, a successful anchovy catching depends on controling of fishing lamp. On the study, the distribution of spectral irradiance illumination of incandescent lamp(1kw) and the irradiance efficiency of reflection plate were analyzed and discussed to investigate the ability of fishing lamp which can attract anchovy school effectively. The results obtained are summarized as follows : 1. Around 180% of irradiance efficiency of incandescent lamp was increased by using the reflection plate. The light of lamp was radiated into water with circular shape. 2. The irradiance illumination of incandescent lamp in air was a maximum in wave length of 994nm but it was 690nm at 0.5m and 1.0m of water depth. 3. The relationship between water depth(x) and water illumination(y) of vertical light is represented as follows : y=146.03e supper(-0.37x) 4. The light of incandescent lamp(1kW) pass through much better into vertical direction than horizontal but it was estimated that the light was not able to reach depth of 20m.