Form Error Prediction in Side Wall Milling Considering Tool Deflection

측벽 엔드밀 가공에서 공구 변형을 고려한 형상 오차 예측

  • 류시형 (전북대학교 기계항공시스템공학부) ;
  • 주종남 (서울대학교 기계항공공학부)
  • Published : 2004.06.01

Abstract

A method for form error prediction in side wall machining with a flat end mill is suggested. Form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. Developed model can predict the surface form error about three hundred times faster than the previous method. Cutting forces and tool deflection are calculated considering tool geometry, tool setting error and machine tool stiffness. The characteristics and the difference of generated surface shape in up milling and down milling are discussed. The usefulness of the presented method is verified from a set of experiments under various cutting conditions generally used in die and mold manufacturing. This study contributes to real time surface shape estimation and cutting process planning for the improvement of form accuracy.

Keywords

References

  1. Martellotti, M. E., 'An Analysis of the Milling Process,' Trans. ASME, Vol. 63, pp. 677-700, 1941
  2. Martellotti, M. E., 'An Analysis of the Milling Process, Part II-Down Milling,' Trans. ASME, Vol. 67, pp. 233-251, 1945
  3. Merchant, M. E., 'Basic Mechanics of the Metal Cutting Process,' Trans. ASME, J. of App. Mech., Vol. 11, pp. 168-175, 1944
  4. Stabler, G. V., 'The Fundamental Geometry of Cutting Tools,' Proc. of the Inst. of Mech. Eng., Vol. 165, pp. 14-26, 1951 https://doi.org/10.1243/PIME_PROC_1951_165_008_02
  5. Koenigsberger, F. and abberwal, A. J. P., 'An Investigation into the Cutting Force Pulsations during Milling Operations,' Int. J. Mach. Tool Design Research, Vol. 1, pp. 15-33, 1961 https://doi.org/10.1016/0020-7357(61)90041-5
  6. Koenigsberger, F. and Pal, A. K. P., 'Some Aspects of the Oblique Cutting Processs,' Int. J. Mach. Tool Design Research, Vol. 8, pp. 45-57, 1968 https://doi.org/10.1016/0020-7357(68)90010-3
  7. Kline, W. A., DeVor, R .E. and Shareef, I. A., 'The prediction of Surface Accuracy in End Milling,'ASME J. of Eng. for Ind., Vol. 104, pp. 272-278, 1982 https://doi.org/10.1115/1.3185830
  8. Sutherland, J. W. and DeVor, R. E., 'An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems,' Trans. ASME, J. of Eng. for Ind., Vol. 108, pp. 269-279, 1986 https://doi.org/10.1115/1.3187077
  9. Seo, T. I. and Cho, M. W., 'Prediction of the Milled Surface Shapes Considering Tool Deflection Effects in Profile Milling Process,' J. of the KSPE, Vol. 16, No. 7, pp. 203-209, 1999
  10. Kline, W. A., DeVor, R. E. and Linderg, J. R., 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' Int. J. Mach. Tool Design Research, Vol. 22, pp. 7-22, 1982 https://doi.org/10.1016/0020-7357(82)90016-6
  11. Kline, W. A. and DeVor, R. E., 'The Effect of Runout on Cutting Geometry and Forces in End Milling,' Int. J. Mach. Tool Design Research, Vol. 23, pp. 123-140, 1983 https://doi.org/10.1016/0020-7357(83)90012-4