초록
본 연구는 시멘트, 혼화재료 및 골재 등 콘크리트용 재료가 P형 슈미트해머에 의한 압축강도 추정 비파괴 시험에 미치는 영향에 대하여 검토하였다. 실험결과, 알루미나 시멘트를 제외한 시멘트 종류, 혼화재 종류와 치환율, 골재 종류 및 굵은골재 최대치수 등 사용재료 요인이 P형 슈미트해머법 비파괴시험에 미치는 영향은 매우 작은 것으로 나타나 P형 슈미트해머를 여러조건에서 사용되는 일반적인 콘크리트에 광범위하게 적응할 수 있을 것으로 판단된다. 또한 P형 슈미트해머의 반발도와 압축강도간의 상관성은 콘크리트의 사용재료에 관계없이 매우 양호하게 나타나(상관계수 0.96 이상) P형 슈미트해머를 이용하여 비교적 정확하게 압축강도를 추정할 수 있었다. 본 실험조건을 종합한 반발도에 의한 압축강도 추정식은 다음과 같다. $\cdot$수평면 타격 : Fc = 0.765RH - 5.74 (R=0.965) $\cdot$ 수직면 타격 : Fc = 0.793RV - 8.66 (R=0.959)
The present paper is intended to investigate the influence of materials such as cement, mineral admixture and aggregate, on the estimation of compressive strength by P type schmidt hammer. According to the results, the materials of concrete, such as the types of cement, the replacing ratio of mineral admixture, the kinds and maximum size of aggregate, hardly influence on non-destructive test by P type schmidt hammer except for alumina cement, hence, P type schmidt can be applicable to most of the concrete with a wide range. Since the correlativity between the rebound value of P type schmidt hammer and compressive strength is very favorable(above coefficient of correlation 0.96) regardless of materials, it is considered that compressive strength can be estimated comparatively exactly by P type schmidt hammer. The estimating formula of compressive strength by rebound value are derived from this experiment as following. $\cdot$Horizontal strike : Fc = 0.765RH - 5.74 (R=0.965) $\cdot$ Vertical strike Fc = 0.793RV - 8.66 (R=0.959)