참고문헌
- Schulz, H. and Moriwaki, T., 1992, 'High-Speed Machining,' Annals of the CIRP, Vol. 41, No. 2, pp. 637-643 https://doi.org/10.1016/S0007-8506(07)63250-8
- Tlusty, J., 1993, 'High-Speed Machining,' Annals of the CIRP, Vol. 42, No. 2, pp. 733-738 https://doi.org/10.1016/S0007-8506(07)62536-0
- Youcef-Toumi, K., 1996, 'Modeling, Design and Control Integration: A Necessary Step in Mechatronics,' IEEE/ASME Trans. On Mechatronics, Vol. 1, No. 1, pp.29-38 https://doi.org/10.1109/3516.491407
- Isermann, R., 1996, 'On the Design and Control of Mechatronic Systems-A Survey,' IEEE Trans. On Industrial Electronics, Vol.43, No.1, pp. 4-15 https://doi.org/10.1109/41.481402
- Reinhart, G. and Weissenberger, M., 1999, 'Multibody Simulation of Machine Tools as Mechatronic Systems for Optimization of MotionDynamics in the Design Process,' Proc. of the 1999 IEEE/ASME, pp. 605-610 https://doi.org/10.1109/AIM.1999.803237
- Koren, Y., 1980, 'Cross-Coupled Biaxial Computer Control for Manufacturing Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 102, No. 4, pp. 265-272 https://doi.org/10.1115/1.3149612
- Tomizuka, M., 1987, 'Zero Phase Error Tracking Algorithm for Digital Control,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, No. 3, pp. 65-68 https://doi.org/10.1115/1.3143822
- Ebrahimi, M. and Whalley, R., 2000, 'Analysis, Modeling and Simulation of Stiffness in Machine Tool Drives,' Computers & Inductrial Engineering, Vol. 38, pp. 93-105 https://doi.org/10.1016/S0360-8352(00)00031-0
- Wu, B. C., Young, G. S., and Huang, T. Y., 2000, 'Application of a Two-level Optimization Process to Conceptual Structural Design of a Machine Tool,' Int. J. of Machine Tools & Manufacture, Vol. 40, pp. 783-794 https://doi.org/10.1016/S0890-6955(99)00113-3
- Koren, Y., 1997, Control of Machine Tools,' ASME Journal of Manufacturing Science and engineering, Vol. 119, pp.749-755 https://doi.org/10.1115/1.2836820
- Park, Y., J., and Chung, S., C., 1999, 'A Study on the Integrated Design of Axial Magnetic Bearing Systems,' Trans. of KSME(A), Vol. 23, No. 5, pp. 730-742(in Korean)
- Skelton, R. E., 1997, 'Integrated Design, Modeling and Control of Structure,' Proc. of KACC, pp. 1-4
- Park, Y., J., and Chung, S., C., 1999, 1998, 'A Study on the Optimal Design of radial Magnetic Bearing,' Trans. of KSME(A), Vol. 22, No. 7, pp.1166-1176
- Chang, H., D, and Chung, S., C., 2002, 'Integrated Design of radial Active Magnetic Bearing Systems Using Genetic Algorithms,' Mechatronics, Vol. 12, pp.19-36 https://doi.org/10.1016/S0957-4158(00)00068-4
- Dequidt, A., Castelain, J. M. and Valdes, E., 2000, 'Mechanical Pre-Design of High Performance Motion Servomechanisms,' Mechanism and Machine Theory, Vol. 35, pp. 1047-1063 https://doi.org/10.1016/S0094-114X(99)00055-5
- Kakino, Y., Matsubara, A., Li, Z., Ueda, D., Nakagawa, H., Takeshita, T., and Maruyama, H., 1997, 'A Study on the Total Tuning of Feed Drive Systems in NC Machine Tools (4th report),' JSPE, Vol63, No 3, pp.368-372 https://doi.org/10.2493/jjspe.63.368
- LM System Catalog, THK co., Ltd, Technical reports, 1992
- Ugral, A. C. and Fenster, S. K., 1987, Advanced Strength and Applied Elasticity, Elsevier, New York, pp. 300-315
- Inman, D., J., 1994, Engineering Vibration, Prentice Hall, New Jersey, pp.329-340
- Slocum, A. H., 1992, Precision Machine Design, Prentice-Hall International, Inc., New York
- MATLAB Optimization User Gude, Mathworks, Inc., 2000