Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Integrated Design of High-speed Feed Drive Systems

고속 이송계의 통합설계

  • 김민석 (한양대학교 대학원 기계설계학과) ;
  • 정성종 (한양대학교 기계공학부)
  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

High-speed feed drive systems have been widely used in the manufacturing and semiconductor industries. Specifications for high-speed systems require more advanced capabilities than conventional feed drive systems. It is necessary to devise special design concepts to achieve the level of performance for high-speed feed drive systems. In this paper, an integrated design method is proposed for high-speed feed drive systems in which the interactions between mechanical and electrical subsystems ought to be considered simultaneously during the design process. Based on the integrated design method, a nonlinear optimal design procedure of mechanical subsystems considering the Abbe and radius errors is accomplished through the design process of electrical subsystems satisfying the control stability and the saturation condition of actuators as well as the relative stability. Both mechanical and electrical parameters are considered as design variables. Simulations and numerical case studies show that the integrated design method of high-speed feed drive systems creates results satisfying the desired performances of mechatronic systems.

Keywords

References

  1. Schulz, H. and Moriwaki, T., 1992, 'High-Speed Machining,' Annals of the CIRP, Vol. 41, No. 2, pp. 637-643 https://doi.org/10.1016/S0007-8506(07)63250-8
  2. Tlusty, J., 1993, 'High-Speed Machining,' Annals of the CIRP, Vol. 42, No. 2, pp. 733-738 https://doi.org/10.1016/S0007-8506(07)62536-0
  3. Youcef-Toumi, K., 1996, 'Modeling, Design and Control Integration: A Necessary Step in Mechatronics,' IEEE/ASME Trans. On Mechatronics, Vol. 1, No. 1, pp.29-38 https://doi.org/10.1109/3516.491407
  4. Isermann, R., 1996, 'On the Design and Control of Mechatronic Systems-A Survey,' IEEE Trans. On Industrial Electronics, Vol.43, No.1, pp. 4-15 https://doi.org/10.1109/41.481402
  5. Reinhart, G. and Weissenberger, M., 1999, 'Multibody Simulation of Machine Tools as Mechatronic Systems for Optimization of MotionDynamics in the Design Process,' Proc. of the 1999 IEEE/ASME, pp. 605-610 https://doi.org/10.1109/AIM.1999.803237
  6. Koren, Y., 1980, 'Cross-Coupled Biaxial Computer Control for Manufacturing Systems,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 102, No. 4, pp. 265-272 https://doi.org/10.1115/1.3149612
  7. Tomizuka, M., 1987, 'Zero Phase Error Tracking Algorithm for Digital Control,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 109, No. 3, pp. 65-68 https://doi.org/10.1115/1.3143822
  8. Ebrahimi, M. and Whalley, R., 2000, 'Analysis, Modeling and Simulation of Stiffness in Machine Tool Drives,' Computers & Inductrial Engineering, Vol. 38, pp. 93-105 https://doi.org/10.1016/S0360-8352(00)00031-0
  9. Wu, B. C., Young, G. S., and Huang, T. Y., 2000, 'Application of a Two-level Optimization Process to Conceptual Structural Design of a Machine Tool,' Int. J. of Machine Tools & Manufacture, Vol. 40, pp. 783-794 https://doi.org/10.1016/S0890-6955(99)00113-3
  10. Koren, Y., 1997, Control of Machine Tools,' ASME Journal of Manufacturing Science and engineering, Vol. 119, pp.749-755 https://doi.org/10.1115/1.2836820
  11. Park, Y., J., and Chung, S., C., 1999, 'A Study on the Integrated Design of Axial Magnetic Bearing Systems,' Trans. of KSME(A), Vol. 23, No. 5, pp. 730-742(in Korean)
  12. Skelton, R. E., 1997, 'Integrated Design, Modeling and Control of Structure,' Proc. of KACC, pp. 1-4
  13. Park, Y., J., and Chung, S., C., 1999, 1998, 'A Study on the Optimal Design of radial Magnetic Bearing,' Trans. of KSME(A), Vol. 22, No. 7, pp.1166-1176
  14. Chang, H., D, and Chung, S., C., 2002, 'Integrated Design of radial Active Magnetic Bearing Systems Using Genetic Algorithms,' Mechatronics, Vol. 12, pp.19-36 https://doi.org/10.1016/S0957-4158(00)00068-4
  15. Dequidt, A., Castelain, J. M. and Valdes, E., 2000, 'Mechanical Pre-Design of High Performance Motion Servomechanisms,' Mechanism and Machine Theory, Vol. 35, pp. 1047-1063 https://doi.org/10.1016/S0094-114X(99)00055-5
  16. Kakino, Y., Matsubara, A., Li, Z., Ueda, D., Nakagawa, H., Takeshita, T., and Maruyama, H., 1997, 'A Study on the Total Tuning of Feed Drive Systems in NC Machine Tools (4th report),' JSPE, Vol63, No 3, pp.368-372 https://doi.org/10.2493/jjspe.63.368
  17. LM System Catalog, THK co., Ltd, Technical reports, 1992
  18. Ugral, A. C. and Fenster, S. K., 1987, Advanced Strength and Applied Elasticity, Elsevier, New York, pp. 300-315
  19. Inman, D., J., 1994, Engineering Vibration, Prentice Hall, New Jersey, pp.329-340
  20. Slocum, A. H., 1992, Precision Machine Design, Prentice-Hall International, Inc., New York
  21. MATLAB Optimization User Gude, Mathworks, Inc., 2000